How do I reset my lamp timer / counter of my JVC TV TS-CL110UAA (TS-CL110U) lamp after replacing my lamp?
How do I reset my JVC D-ILA lamp counter? How do I clear the lamp warning message? How do I get rid of the annonying Lamp replacement message on my TV screen? Why is this “Replace your lamp” message on my JVC TV set?
If you’ve got a JVC TV, or even another D-ILA or DLP TV and you’re getting a similar message, chances are it’s as simple as reseting the TV lamp hour counter.
Per the JVC Manual, its very simple to reset the lamp counter from any TV using the JVC TS-CL110UAA (TS-CL110U) lamp.
1) Press the Menu button
2) Scroll down to the LAMP TIMER RESET option, scroll right to enter
3) Confirm that it is OK to reset the lamp timer by hitting the OK button.
4) The on-screen menu should confirm the lamp was reset correctly
Below is a snapshot from a JVC Manual (Click to Enlarge):
Why is this warning message in place? JVC, and other manufactures know the mean average life of these consumable lamps. Just as your car has a mileage meter that sometimes gets activated for tuneups and service calls at certain mileages, JVC wants to give its consumers a “heads” up, that you lamp has just about reached it’s average life span. This translates to, it’s a good idea to have a spare back up lamp because this sucker might blow up any second now! So in case you get this message, make sure you have a spare lamp on hand and go ahead and reset the lamp counter to get rid of the annoying message. Once your lamp JVC TS-CL110UAA (TS-CL110U or PK-CL120U) finally goes out and you put in a new lamp, you want to reset your counter again.
Where can i get a remote for my JVC projection TV? Anyone know?
Jack,
The JVC Remote Control for D-ILA Projection TVs are all the same..The part number is: RM-C15G-1H (variations could be: RM-C15G or RMC15G1H or RM-C15G1H or RMC15G-1H)
You can purchase this remote at a significant discount by click here:
http://www.discount-merchant.com/p-2466-jvc-rm-c14g-remote-control.aspx
This JVC Remote is compatible with:
52" D-ILA TVs
HD-52G456
HD-52G576
HD-52G586
HD-52G647
HD-52G657
HD-52G786
HD-52G787
HD-52G886
HD-52G887
HD-52Z575
HD-52Z585
55" D-ILA TVs
HD-55G456
HD-55G466
56" D-ILA TVs
HD-56G787
HD-56G647
HD-56FH96
HD-56G657
HD-56G786
HD-56G886
HD-56G887
61" D-ILA TVs
HD-61FH96
HD-61G657
HD-61G787
HD-61G887
HD-61Z456
HD-61Z575
HD-61Z585
HD-61Z786
HD-61Z886
HD-P61R1U
70" D-ILA TVs
HD-70FH96
HD-70G886
HD-P70R1U
I believe my lamp went out on my 56″ JVC DLP model number HD-56G787. Do you have directions on how to replace it? I heard a pop, then crackle and now there is no picture. I never got a warning message…is that normal?
Thanks!
April
That has heppened to me for the last 2 years. I have been replacing the bulb every six months now and it realy sucks.
My JVC TV has a flashing red light above the reset/program button and the pwer button is red and constantly blink blue…..can anyone help
Brooks,
Are those the only symptoms you’re having? Any strange noises discoloration? Have you ever replaced anything in your tv?
I am having the same problem with my JVC as Brooks Model HDZ56RX5. I am guessing its the lamp as i did have a warning message but cant seem to locate a place to buy the lamp for it…let alone a guide as to how to replace it. Relatively handy and willing to give it a crack any advice tips tricks and location/price of a new lamp would be GREATLY appreciated. Cheers. P.S My 3 yr old will love you to death if you can help me fix it..he is missing playschool.
Thanks in advance!
Andrew
My JVC 56G-787 tv had the power and lamp led’s blinking rapidly and simultaneously. I ordered an original replacement lamp and just finished installing it. When I pulled the old lamp out I could see that it had shattered inside. The lamp did not burn out. I got no warning message that the lamp would soon need to be replaced. The tv works fine now. Hopefully for another 3 years.
How did you hit ok to confirm the reset? I don’t have my remote anymore.
Hi Alicia,
The initial research I’ve done indicates that you need the remote in order to reset. Try visiting http://www.discount-merchant.com to find the remote that fits yours TV. You can also try joining our forum to talk to our experts over there. I’ve also asked our in-house expert for his advice. Stay in touch and let me know how things are going.
Regards,
Shelagh
My JVC HD-61Z886 has had 2 bulbs replaced and worked fine for about a year, then the trouble started! I have sound but the picture is full of neon green lines. Can anyone help me please?
I have a 60 inch jvc projection tv. I had to replace the bulb. now it wants me to reset the timer. I lost the manual so I’m in the dark with this. Any help would be helpful – thank you, Scott
Hi Scott,
I suggest joining our forum since there are lots of experts there who can help you solve the problem. http://www.fixyourdlp.com/forum. There is also an online guide that may help:http://guides.fixyourdlp.com/jvc/TS-CL110U.php
Stay in touch and let me know how things are going.
Regards,
Shelagh
I have a 51in JVC projection TV, I replaced the bulb and when I turned the TV on all I’m getting is a green screen. How do I correct that problem?
Hi Cheryl,
That sounds like the color wheel or ballast. I would recommend joining our forum where there is a community of experts that can help you solve the problem. http://www.fixyourdlp.com/forum/
Let me know how things are going.
Regards,
Shelagh