When to replace your Sanyo POA-LMP 21
Sanyo POA-LMP 21, Sanyo POA-LMP21 (service parts no 610 290 6939)
The life of the Sanyo POA-LMP21j (service parts no 610 290 6939) lamp runs anywhere from 1,000 to 3,000 hours. It’s life cycle will vary depending on how often depending your projector is use and whether there is regular maintenance of the filters.
The life expectancy of your Sanyo POA-LMP21j (service parts no 610 290 6939)lamp depends on the amount of usage and whether the air filters are cleaned on a regular basis. A build up of dust on the filters will reduce the cooling fans effectiveness and may cause the lamp to overheat. It’s always a good idea to keep a spare lamp on hand so you can replace the lamp immediately and not wait to use the projector.
Only genuine Sanyo POA-LMP21j (service parts no 610 290 6939) lamps should be used when replacing the projector lamp order to keep your projector is good working order. The authentic POA-LMP21j has been manufactured to meet the specifications of the Sanyo projectors.
While knock-off lamps may seem like a bargain due to their low prices, these counterfeit lamps can damage the sensitive and expensive mechanisms and expensive mechanisms in your Sanyo projector and may also void your guarantee from the manufacturer. Purchasing a genuine Sanyo POA-LMP21j (610 290 6939) will ensure you keep your projector in good working order.
The Sanyo POA-LMP 21 can be used in the following projectors:
Sanyo PLC-SU20
Sanyo PLC-SU22
Sanyo PLC-XU20
Sanyo PLC-XU22
For step-by-step instructions on how to replace the Sanyo POA-LMP21j (service parts no 610 290 6939) projector lamp, please click on your specific model listed below:
Sanyo PLC SU20N Projectior
Click here for step-by-step instructions on how to change the Sanyo POA-LMP21j (service parts no 610 290 6939) projector lamp for the Sanyo PLC-SU20 projector.
Sanyo PLC SU22 Projector
Click here for step-by-step instructions on how to change the Sanyo POA-LMP21j (service parts no 610 290 6939) projector lamp for the Sanyo PLC-SU22 projector.
Sanyo PLC-XU20
Click here for step-by-step instructions on how to change the Sanyo POA-LMP21j (service parts no 610 290 6939) projector lamp for the Sanyo PLC-XU20 projector.
Sanyo PLC XU22-N projector
Click here for step-by-step instructions on how to change the Sanyo POA-LMP21j (service parts no 610 290 6939) projector lamp for the Sanyo PLC-XU22 projector.
Leave a Reply