ASK Proxima A1200 projector lamp

Our guide shows how to replace the ASK Proxima A1200 projector lamp

When it time to replace the ASK Proxima A1200 projector lamp, the Lamp Replace Indicator lights up. You will also see a “Change Lamp” message on screen when there is only 20 hours of lamp life left.

Step 1: Buy authentic

Buy an authentic ASK Proxima SP-LAMP-039 projector lamp and make life easier. Generic lamps look like a great bargain but these knock-off lamps are created with inferior materials making them susceptible to explosions when installed. Manufactured with toxic cancer-causing materials, knock-off lamps also have a shorter life span and can damage the precise components in your ASK Proxima A1200 projector projector.

Learn more about spotting dangerous projector lamps by reading: 7 tips for spotting counterfeits.

Buy this lamp on Amazon from the following authorized dealers:

Step 2: Replacing the ASK Proxima SP-LAMP-039

NOTE: It’s very important to let the projector cool off before replacing the ASK Proxima SP-LAMP-039. These projectors operate under high temperatures and you can get a severe burn unless the projector has cooled.

ASK Proxima A1200 projector lamp lid, ASK Proxima SP-LAMP-039

Turn off the projector and unplug the power cord.
Remove the ASK Proxima SP-LAMP-039 lamp door by removing the side of the lamp door.
Slide the door forward and left the door off.

Loosen the two screws holding the ASK Proxima SP-LAMP-039 lamp housing in place.
Grab the ASK Proxima SP-LAMP-039 lamp handle and carefully lift the lamp cage up.
Install the new ASK Proxima SP-LAMP-039 lamp housing and tighten the screws.
Slide the lamp door back in place. Tighten the screw on the side.
Plug the power cord in and press the POWER button to turn the projector back on.
You are ready to reset the lamp hours.

NOTE: The ASK Proxima SP-LAMP-039 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Step 3: Resetting the lamp hours timer

It’s very important to reset the lamp hours timer after replacing the ASK Proxima SP-LAMP-039 lamp.

To reset the lamp hours:

Open the MAIN menu. Press SELECT
Scroll down to the STATUS and SERVICE menu.
Select the RESET LAMP HOURS.
Lamp hours will be reset to zero.

Eco-friendly alternative

Looking for a green alternative? Try replacing only the bulb and re-using the same plastic cage. Watch this Ask Proxima replacement guide to find out more.

Get the ASK Proxima SP-LAMP-039 to last longer with these tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the ASK Proxima A1300 and let it stand for at least one hour ever 24 hours.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Top tips for extending DLP projector lamp life

How to replace the ASK Proxima A1200 projector lamp