<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	
	>
<channel>
	<title>
	Comments on: Contribute	</title>
	<atom:link href="https://www.fixyourdlp.com/about/contribute/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.fixyourdlp.com</link>
	<description>Your Community For DLP Projector Repair Tips!</description>
	<lastBuildDate>Sun, 16 Dec 2018 17:23:42 +0000</lastBuildDate>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.4</generator>
	<item>
		<title>
		By: Shelagh McNally		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-91350</link>

		<dc:creator><![CDATA[Shelagh McNally]]></dc:creator>
		<pubDate>Sun, 16 Dec 2018 17:23:42 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-91350</guid>

					<description><![CDATA[In reply to &lt;a href=&quot;https://www.fixyourdlp.com/about/contribute/#comment-91338&quot;&gt;Jared Baer&lt;/a&gt;.

Hi Jared,
First thing to check is if you have reset the lamp timer. It&#039;s the final step to lamp replacement and people often forget to do this. If you don&#039;t reset the lamp timer to zero, the projector will think the old lamp is still in use and shut down to self preserve. If that doesn&#039;t work then it may be actual projector lamp. If it&#039;s not an OEM but rather a generic -- or even worse -- counterfeit --then it may not have been calibrated properly and never fire properly. Check the lamp timer first and then return the lamp. Hope this helps.
Regards,
Shelagh]]></description>
			<content:encoded><![CDATA[<p>In reply to <a href="https://www.fixyourdlp.com/about/contribute/#comment-91338">Jared Baer</a>.</p>
<p>Hi Jared,<br />
First thing to check is if you have reset the lamp timer. It&#8217;s the final step to lamp replacement and people often forget to do this. If you don&#8217;t reset the lamp timer to zero, the projector will think the old lamp is still in use and shut down to self preserve. If that doesn&#8217;t work then it may be actual projector lamp. If it&#8217;s not an OEM but rather a generic &#8212; or even worse &#8212; counterfeit &#8211;then it may not have been calibrated properly and never fire properly. Check the lamp timer first and then return the lamp. Hope this helps.<br />
Regards,<br />
Shelagh</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Jared Baer		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-91338</link>

		<dc:creator><![CDATA[Jared Baer]]></dc:creator>
		<pubDate>Tue, 11 Dec 2018 11:57:19 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-91338</guid>

					<description><![CDATA[I have an Optoma 1080GT projector.  My original bulb blew after over 3000 hours.  I bought an OEM replacement and when I reinstalled the new light the light will not turn on at all.  The projector turns on and runs as normal just no light.  I’ve tried reinstalling the light several times to ensure it’s seated properly and checked wire connections with no successful results any help would be appreciated as I loved this projector!]]></description>
			<content:encoded><![CDATA[<p>I have an Optoma 1080GT projector.  My original bulb blew after over 3000 hours.  I bought an OEM replacement and when I reinstalled the new light the light will not turn on at all.  The projector turns on and runs as normal just no light.  I’ve tried reinstalling the light several times to ensure it’s seated properly and checked wire connections with no successful results any help would be appreciated as I loved this projector!</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Shelagh McNally		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-90926</link>

		<dc:creator><![CDATA[Shelagh McNally]]></dc:creator>
		<pubDate>Wed, 30 May 2018 06:18:05 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-90926</guid>

					<description><![CDATA[In reply to &lt;a href=&quot;https://www.fixyourdlp.com/about/contribute/#comment-90916&quot;&gt;Barbara&lt;/a&gt;.

Hi Barbara,
We have a tutorial that can help you replace the lamp: http://www.fixyourdlp.com/2015/01/15/replacement-lamp-sony-kdf-50e2000/
It shows step by step instructions. It&#039;s not complicated. Check out this you tube tutorial: https://www.youtube.com/watch?v=8BRzwP_5nHc
Good luck.
Regards,
Shelagh]]></description>
			<content:encoded><![CDATA[<p>In reply to <a href="https://www.fixyourdlp.com/about/contribute/#comment-90916">Barbara</a>.</p>
<p>Hi Barbara,<br />
We have a tutorial that can help you replace the lamp: <a href="http://www.fixyourdlp.com/2015/01/15/replacement-lamp-sony-kdf-50e2000/" rel="ugc">http://www.fixyourdlp.com/2015/01/15/replacement-lamp-sony-kdf-50e2000/</a><br />
It shows step by step instructions. It&#8217;s not complicated. Check out this you tube tutorial: <a href="https://www.youtube.com/watch?v=8BRzwP_5nHc" rel="nofollow ugc">https://www.youtube.com/watch?v=8BRzwP_5nHc</a><br />
Good luck.<br />
Regards,<br />
Shelagh</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Barbara		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-90916</link>

		<dc:creator><![CDATA[Barbara]]></dc:creator>
		<pubDate>Tue, 29 May 2018 18:12:10 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-90916</guid>

					<description><![CDATA[Sony TV model KDF-50E2000, serial # 8706086
Warning sign of &quot;projector lamp nearing failure - replace&quot; shows on startup.  Can not find manual.  Where is the projector lamp assembly located on the rear of the TV.  I would appreciate a video with instructions.  Thank-you]]></description>
			<content:encoded><![CDATA[<p>Sony TV model KDF-50E2000, serial # 8706086<br />
Warning sign of &#8220;projector lamp nearing failure &#8211; replace&#8221; shows on startup.  Can not find manual.  Where is the projector lamp assembly located on the rear of the TV.  I would appreciate a video with instructions.  Thank-you</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Shelagh McNally		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89534</link>

		<dc:creator><![CDATA[Shelagh McNally]]></dc:creator>
		<pubDate>Wed, 28 Jun 2017 17:59:59 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89534</guid>

					<description><![CDATA[In reply to &lt;a href=&quot;https://www.fixyourdlp.com/about/contribute/#comment-89521&quot;&gt;Max Stinchcombe&lt;/a&gt;.

Hi Max,
Have you looked at our DIY guide on changing the projector lamp? http://www.fixyourdlp.com/2012/11/21/how-to-replace-the-epson-eh-tw3200-projector-lamp/
The tool is a small flat head screw driver and you should be able to substitute it with a flat head screw driver that can fit in that slot to pop it open. Just be gentle and it should work. Hope this helps.
Cheers,
Shelagh]]></description>
			<content:encoded><![CDATA[<p>In reply to <a href="https://www.fixyourdlp.com/about/contribute/#comment-89521">Max Stinchcombe</a>.</p>
<p>Hi Max,<br />
Have you looked at our DIY guide on changing the projector lamp? <a href="http://www.fixyourdlp.com/2012/11/21/how-to-replace-the-epson-eh-tw3200-projector-lamp/" rel="ugc">http://www.fixyourdlp.com/2012/11/21/how-to-replace-the-epson-eh-tw3200-projector-lamp/</a><br />
The tool is a small flat head screw driver and you should be able to substitute it with a flat head screw driver that can fit in that slot to pop it open. Just be gentle and it should work. Hope this helps.<br />
Cheers,<br />
Shelagh</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Max Stinchcombe		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89521</link>

		<dc:creator><![CDATA[Max Stinchcombe]]></dc:creator>
		<pubDate>Thu, 22 Jun 2017 09:37:48 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89521</guid>

					<description><![CDATA[I have recently moved house and &quot;inherited&quot; an Epson EH-TW 3200. I need to replace the lamp but I understand that I need a special tool to open the cover. Can you help me? And can you give me further instructions on how to make the change please? Thank you, Max]]></description>
			<content:encoded><![CDATA[<p>I have recently moved house and &#8220;inherited&#8221; an Epson EH-TW 3200. I need to replace the lamp but I understand that I need a special tool to open the cover. Can you help me? And can you give me further instructions on how to make the change please? Thank you, Max</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Shelagh McNally		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89300</link>

		<dc:creator><![CDATA[Shelagh McNally]]></dc:creator>
		<pubDate>Tue, 25 Apr 2017 04:48:14 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89300</guid>

					<description><![CDATA[In reply to &lt;a href=&quot;https://www.fixyourdlp.com/about/contribute/#comment-89242&quot;&gt;Nancy&lt;/a&gt;.

Hi Nancy,
Press the GUIDE and FORMAT buttons on the front panel to reset all A/V Memories to the default settings. If that doesn&#039;t switch the HDMI back on then try:
On the remote press Menu 2 4 7 0 , hightlight Initialize and press Enter. Wait for it to finish and press the RESET button on the TV.
That should do the trick. 
Let me know if this worked.
Cheers,
Shelagh]]></description>
			<content:encoded><![CDATA[<p>In reply to <a href="https://www.fixyourdlp.com/about/contribute/#comment-89242">Nancy</a>.</p>
<p>Hi Nancy,<br />
Press the GUIDE and FORMAT buttons on the front panel to reset all A/V Memories to the default settings. If that doesn&#8217;t switch the HDMI back on then try:<br />
On the remote press Menu 2 4 7 0 , hightlight Initialize and press Enter. Wait for it to finish and press the RESET button on the TV.<br />
That should do the trick.<br />
Let me know if this worked.<br />
Cheers,<br />
Shelagh</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Nancy		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89242</link>

		<dc:creator><![CDATA[Nancy]]></dc:creator>
		<pubDate>Thu, 20 Apr 2017 13:52:40 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89242</guid>

					<description><![CDATA[I have a Mitsubishi fd630 projector that does not switch to HDMI. The HDMI is greyed out. I reset everything, now I get a solid blue screen. Help!]]></description>
			<content:encoded><![CDATA[<p>I have a Mitsubishi fd630 projector that does not switch to HDMI. The HDMI is greyed out. I reset everything, now I get a solid blue screen. Help!</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Shelagh McNally		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89097</link>

		<dc:creator><![CDATA[Shelagh McNally]]></dc:creator>
		<pubDate>Mon, 16 Jan 2017 03:31:14 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89097</guid>

					<description><![CDATA[In reply to &lt;a href=&quot;https://www.fixyourdlp.com/about/contribute/#comment-89094&quot;&gt;Bernard McGuigan&lt;/a&gt;.

Hi Bernard,
This could be a number of things. It could be the display mode on your laptop. The four most common are: 1) laptop display only, 2) external display only, 3) duplicate the laptop display on the external display, and 4) extend the laptop display onto the external display. You could also remove and re-seat each cable/connector to make sure the connections are secure. Check the projector, the input source selected on the data projector may be using a different input source than the one your computer is connected to. Also make your computer is not on standby mode and it&#039;s not running on battery since this can affect the connection. I would also recommend that you join our forum where there are more experts who can help you determine what is causing this problem. http://www.fixyourdlp.com/forum/
Cheers,
Shelagh]]></description>
			<content:encoded><![CDATA[<p>In reply to <a href="https://www.fixyourdlp.com/about/contribute/#comment-89094">Bernard McGuigan</a>.</p>
<p>Hi Bernard,<br />
This could be a number of things. It could be the display mode on your laptop. The four most common are: 1) laptop display only, 2) external display only, 3) duplicate the laptop display on the external display, and 4) extend the laptop display onto the external display. You could also remove and re-seat each cable/connector to make sure the connections are secure. Check the projector, the input source selected on the data projector may be using a different input source than the one your computer is connected to. Also make your computer is not on standby mode and it&#8217;s not running on battery since this can affect the connection. I would also recommend that you join our forum where there are more experts who can help you determine what is causing this problem. <a href="http://www.fixyourdlp.com/forum/" rel="ugc">http://www.fixyourdlp.com/forum/</a><br />
Cheers,<br />
Shelagh</p>
]]></content:encoded>
		
			</item>
		<item>
		<title>
		By: Bernard McGuigan		</title>
		<link>https://www.fixyourdlp.com/about/contribute/#comment-89094</link>

		<dc:creator><![CDATA[Bernard McGuigan]]></dc:creator>
		<pubDate>Sat, 14 Jan 2017 17:50:26 +0000</pubDate>
		<guid isPermaLink="false">http://www.fixyourdlp.com/?page_id=1648#comment-89094</guid>

					<description><![CDATA[Hello , 
Wonder if you can help .
We have an 
&quot;ask  proxima&quot; projector that increasingly takes longer ( if at all ) to get  connected to our laptop . 
I just went out today and got two new cables : 
1. from projector to plug point 
2. from projector to laptop . 
Still no picture . Wonder if it is the sockets in projector that are not connecting .
Any thoughts , ideas or hints gratefully accepted.
Or tel / email of someone who repairs in the Sussex area.
Many thanks 
Bernard]]></description>
			<content:encoded><![CDATA[<p>Hello ,<br />
Wonder if you can help .<br />
We have an<br />
&#8220;ask  proxima&#8221; projector that increasingly takes longer ( if at all ) to get  connected to our laptop .<br />
I just went out today and got two new cables :<br />
1. from projector to plug point<br />
2. from projector to laptop .<br />
Still no picture . Wonder if it is the sockets in projector that are not connecting .<br />
Any thoughts , ideas or hints gratefully accepted.<br />
Or tel / email of someone who repairs in the Sussex area.<br />
Many thanks<br />
Bernard</p>
]]></content:encoded>
		
			</item>
	</channel>
</rss>

<!--
Performance optimized by W3 Total Cache. Learn more: https://www.boldgrid.com/w3-total-cache/?utm_source=w3tc&utm_medium=footer_comment&utm_campaign=free_plugin

Page Caching using Disk: Enhanced 
Minified using Disk
Fragment Caching 0/0 fragments using Disk

Served from: www.fixyourdlp.com @ 2026-11-09 07:34:29 by W3 Total Cache
-->