We're now Screen and Projector! For updated content, visit ScreenAndProjector.com and follow @screenandproj on social media!

If you need a lamp for your RCA Scenium, part number: 265866, 265919, 269343, 270414, 271326, 260962, or any other RCA DLP TV lamp, visit Discount-Merchant.com for the best price online or click on this link.

In most cases, your RCA Scenium is powered by a 120W UHP (Ultra High Performance) lamp manufactured by Philips. There is a chance that you have an OSRAM lamp if your enclosure says “Type-B” on it. It is FixYourDLP.com’s suggestion to replace your lamp with Philips branded bulbs only. Philips is the innovator of UHP technology and these lamps are the most sophisticated and reliable lamps available on the marketplace. If you have an OSRAM lamp and it is less than two years old, you’re probably already know the OSRAM lamp are not so great.

Trust Philips, UHP innovators and worldwide leader in the R&D and production of UHP Lamps…it doesn’t make sense to use a cheap aftermarket brand as they always cost you more in the long run! If your lamp is Philips, do not replace it
with a OSRAM, LTI, or other generic manufactured units. Now for your viewing pleasure, here is what your ORIGINAL TV lamp looks like 😉 Click on each image for a high resolution photo.

(more…)

Click below to buy this lamp now:
buynow

Lowest Prices Anywhere!

Learn how to install it here: http://guides.fixyourdlp.com/jvc/TS-CL110UAA.php

Should you buy an original lamp or a generic replacement lamp for your JVC D-ILA TV? The choice is clearly up to the consumer, but we like the original lamps for a few reasons:

1. Engineered by JVC for JVC. Your D-ILA is a fine-tuned TV when running properly, capable of amazing colors and resolution…why degrade it for a few dollars in difference?! Our partner site, Discount-Merchant.com has these original lamps available for $160. This is $40 less than the retail price of a generic, brand LTI lamp.

2. According to JVC, they have corrected issues with their initial lamp design which was prone to premature failure. The new lamp is redesigned and a more reliable lamp. Although the part number and model numbers are the same, these lamps should be rolling out to most dealers right now. It’s important that whoever you purchase your replacement lamp from knows about this revision or they can assure you of these “new batch” lamps. Don’t get stuck with someone’s old inventory!

.
*** Edited 02/21/2008 ***
Although we’ve supported this theory from JVC, in the last year and half, we have seen very little improvement in the quality of these lamps. Matsushita (Panasonic) has been really struggling with the R&D of UHP Technology and evidence is readily available…just talk to any Panasonic DLP owner from the last 4 years! There is a class action lawsuit against Panasonic right now! Conclusion? Purchase Philips UHP Lamps as a replacement…due to demand, Philips just release this lamp for all JVC TVs!!

****

(more…)

For the best price on JVC D-ILA lamp, visit Discount-Merchant.com or click here.

Replacing your JVC D-ILA Lamp is very simple. Only tools required:

Flathead screwdriver (remove your lamp enclosure)
Torx T-6 or comparable driver

That’s it!

(Click on pics for high resolution photos)

Once you have the enclosure out, it should look similar to this:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_1

(more…)

Ever wondered what powers your D-ILA TV?

TS-CL110UAA_TS-CL110U_ TSCL110UAA_Lamp_Bulb_FixYouDLP.com

(more…)

Samsung DLP TV This is a quick reference guide to show you how to reset your Samsung DLP TV’s lamp hour meter or hour counter.

Step 1: Buy authentic

It’s important that you install an OEM lamp and avoid a generic, compatible lamp.

Knock-off, compatible generic lamps may seem like a bargain in the beginning. They actually cost more in the long run since they can damage the color wheel and ballast mechanisms in your RPTV. They also give off poor light, are prone to messy explosions and actually have a shorter life.

There are also health concerns associated with these lamps. Generic lamps are made with toxic substances that can compromise your family’s health. Read more about the dangers of Krypton-85.

When you purchase an OEM replacement lamps you’re guaranteed the best lamp for your RPTV.

We recommend purchasing from an Authorized Philips dealer such as Discount-Merchant.com to insure that you are receiving a genuine Philips brand replacement lamp. Beware of knock-off and counterfeit Philips lamps floating around in the market.

Step 2: Resetting the counter

Once you have installed your OEM replacement lamp, resetting the counter is a very simple procedure:
• Begin with the TV powered off.
• Point your remote towards your TV.
• Press:
• Menu + 1 + 8 + 2 + Power.
• Your TV set should now say “Loading Factory”.
• Browse down to “Option” then press Enter (or the right cursor button).

To exit the service menu, hit press the EXIT button or just turn off your TV (remember not to turn on your TV immediately afterward!).

NOTE: The Mute+1+8+2 buttons needs to be pressed down consecutively and fairly quickly. If your TV does not enter the service menu after using this combination, you can substitute MENU instead of MUTE. This seems to work for some sets. Also, the right cursor arrow also acts as the ENTER button, so try it if you’re having difficulty with the ENTER button.

Advantages of OEM lamps

Brilliant brightness and luminosity: Your OEM lamps has been built to work in harmony with every component in your RPTV. Keep the optics, power supply, electronics and processing algorithms in sync to provide the best image possible – the reason who invested in an RPTV.
Color: Genuine lamps have the correct technology to give the correct optical alignment of your color wheel and give consistent color across the whole screen.
Safety: Your RPTV operates at extremely high temperatures. The quartz, glass and wires in your lamp have to be able to withstand the high pressure heat. Scruplous OEM manufacturers lamps have tested their lamps for safety. Generic manufacturers have not.
Lamp Life: Only OEM lamps have the durability to work for their entire lifespan. Only genuine lamps give you the guaranty of full life performance along with a money back guarantee. Installing a generic knock-off lamp will void your warranty and should any damage be done to your RPTV you’re on your on for repairs. Why threaten the investment you’ve made in your RPTV to sake a few dollars?

Tagged with: ,

What is D-ILA? Is it just a fancy way of saying I have a “DLP” TV? Why did JVC choose D-ILA?

LCOS is the technology, D-ILA is JVC’s version of it. Essentially LCOS is a different approach to standard LCDs were accustomed to in our computer monitors, car navigation systems, cell phones, etc. Instead of the transmissive approach to delivering light, D-ILA and LCOS use a reflective approach powered by Ultra-High Performance (UHP) Lamps.

(more…)

Do you have a Samsung DLP TV with a busted lamp? This is a Do-It-Yourself guide for replacing your Samsung DLP lamp, it shouldn’t take more than 5-10 minutes to replace!

(more…)

Tagged with: , , ,

RCA Lamp Replacement Guide

Please note that this article may be outdated. Visit guides.fixyourdlp.com for more comprehensive installation and repair guides!

Do you have a RCA TV and need a replacement lamp, part number: 265866, 265919, 269343, or 270414? Click here for the best price online! Did that RCA DLP lamp go out on you? It’s a simple fix. Don’t throw that TV away or go with an expensive TV repairman. Often times it’s cheaper to first change the lamp than to call a service technician for $150+. Always buy an OEM part.

We also recommend replacing the entire enclosure if it looks damaged or warped as this may cause your lamp to be misaligned inside the television!

To replace just your lamp, all you need is:

  • An RCA DLP lamp made by Philips
  • A flat-head screwdriver
  • A T-10 & T-15 Torx driver
  • A pair of plyiers
  • A pair of gloves or a lint-free cloth (to wipe the glass down afterwards)

(more…)

Tagged with: , , , ,

Cuidados y manejo de lamparas o focos de proyeccion para TV-DLP

avisos

No mirar directamente la lampara o foco cuando esta en funcionamiento , existe radiacion ultravioleta, utilizar lentes adecuados , en su caso.

Estos tipos de lamparas trabajan a muy altas temperaturas.

Considere que trabajando la lampara o foco para TV-DLP y una vez apagada , antes de manipularla habra de esperar por lo menos media hora

Dentro de la TV-DLP hay altos voltajes de operacion para la lampara o foco y que no deben ser medidos ni manipulados con la TV-DLP encendida.

Al reemplazar la lampara o foco, debera manipularla de preferencia con guantes de latex , una vez montada en el portalampara y fianalizando el proceso de instalacion limpiar con un trapo bien limpio impregando con alcohol desnaturalizado, con el fin de eliminar posibles residuos de grasa o manchas.

Algunas TV-DLP tienen filros donde circula el aire hacia la lampara o foco, se recomienda limpiarlos por lo menos cada 4 meses

Asegurece que al poner el portalampara con su lampara o foco nueva,en su posicion final dentro de la TV-DLP,poner la tapa posterior que cubre el portalampara y reponer los tornillos firmemente, ya que si ud. intenta encender la TV-DLP sin esta tapa posterior , su TV-DLP , no encendera, indicandole falla en lampara o foco.

Sabia ud. que puede reemplazar solo la lampara o foco y seguir utilizando el mismo portalamparas en su TV-DLP ahorrandoce importante sumas de dinero con esto? , http://www.discount-merchant.com/ donde encontraras un reemplazo y equivalencias de varios tipos de lampara o foco

Ademas que hay un adaptador de lamparas o foco , que puedes utilizar y sustituir la mayoria de las grandes lamparas o focos de 100w a 132w y utilizar lampara o foco de ultima generacion , que son de dimenciones mas reducidas y con la mismas prestaciones.

Con este arreglo de igual manera sigues utilizando tu mismo portalamparas , utilizas el reemplazo correcto y listo.

Samsung ha confundido a muchos de sus clientes de TV-DLP…aquí están los antecedentes: Samsung usaba originalmente a Toshiba como su proveedor de lámparas UHP. Samsung pasó por varias tandas de producción y luego decidió cambiar a las Lámparas UHP de Philips. Porqué hicieron el cambio es pura especulación… ¿Mejor Calidad? ¿Mejor reputación? ¿Mejores precios? ¡Quién sabe! Sólo una cosa es clara: Philips es el innovador de lámparas UHP. También son líderes en Investigación y Desarrollo en esta tecnología en crecimiento. Samsung hizo sus deberes y fue con el líder en la industria (¡buen trabajo, Samsung!). Entonces, Samsung originalmente lanzó el BP96-00224A con una lámpara Toshiba. Este fue más tarde cambiado por el BP96-00224C con una lámpara Philips. Abajo hay una imagen que muestra solo las diferencias físicas entre los dos portalámparas.
BP96-00224A y BP96-00224C Samsung foto de lampara
No le preste mucha atención a la forma del portalamparas ya que hay pocas variaciones entre ellos. Más importantes son los conectores y sus formas y colores. Los conectores Toshiba son de un diseño más rectangular y son MARRONES, mientras que las lámparas Philips tienen un conector más redondeado y es NEGRO. Físicamente, las lámparas son del mismo tamaño pero no son intercambiables. Ingresaré otro artículo que muestra las diferencias entre las lámparas propiamente dichas. Aquí hay dos imágenes de la lámpara Samsung:
BP96-00224A vs BP96-00224C foco grande E23 1.0 Philips Lampara
Foco de BP96-00224A vs BP96-00224C
Si usted reemplaza una lámpara Toshiba con una Philips, tendrá que cambiar también el balastro… en caso contrario, podría quemar el balastro, la lámpara, ¡o ambos! Entonces ¿qué lámpara es compatible con qué TV? Espere un momento…. ¡ aún hay mas , ES UN NUEVO diseño de lámpara en el mercado! La nueva lámpara está fabricada por Philips y es compatible como reemplazo de TODAS las lamparas de TV-DLP de Samsung que utilizan una lámpara Philips. Si usted tiene una “Gran” lámpara Philips (como la de la imagen de arriba), necesitará el adaptador para lámparas Philips para usar las nuevas “Pequeñas” lámparas Philips, haga clic aquí para obtener más información acerca del adaptador. De todas maneras, aquí tiene una imagen de la lámpara más moderna:
Philips E22 1.0 Foco Lampara
Pero esta lámpara es mucho más pequeña que la de mi TV…¿Está seguro de que es compatible? Al tiempo que la tecnología de lámparas UHP evoluciona, estas lámparas se vuelven más pequeñas y luminosas. Las lámparas más pequeñas son 100W/120W y utilizan la misma energía que las lámparas viejas, aunque su diseño compacto y moderno es un beneficio adicional a la larga vida que Philips afirma.
Aún estoy confundido, ¿cuenta con una manera simple de distinguir qué tipo de lámpara tengo y cuáles son mis opciones de reemplazo?
La respuesta simple es SI, pero un SI con una excepción. Samsung cometió un grave error con la producción de sus DLPs. ¡No conozco a ningún otro fabricante que haya pasado por tantos cambios de lámparas!
Primer paso: Ubique el código de la lámpara en el lado derecho de su TV (el lado derecho como si estuviera mirando TV). Generalmente, hay una estiqueta ROJA y BLANCA parecida a esta:
BP96-00826A Compatible Lamp
La “(P)” en el código significa Philips. Si su código tiene una “(T)” eso significa que el fabricante es Toshiba… ¡lo que significa también que usted tiene una de las primeras TVs que Samsung fabricó! Esto es una mala noticia considerando que tendrá que cambiar el balastro si quiere usar una de las lámparas “grandes” de Philips o una de las nuevas lámparas “pequeñas” de Philips.
Para ser más CLARO, paso1: descubra quién fabricó su lámpara: Philips o Toshiba.
Paso 2: Si usted tiene una lámpara Philips (P), y el código de la lámpara comienza con BP96-00224, eso significa que usted debe tener una de las lámparas “Grandes” dentro de su TV, una de éstas:
BP96-00224A vs BP96-00224C Lamp Enclosures
Si usted tiene una lámpara Philips (P) y el código de la lámpara comienza con BP96-006, BP96-008, BP96-01, eso significa generalmente que usted tiene una de las lámparas “Pequeñas” dentro de su TV, una de éstas:
BP96-00224A vs BP96-00224C Lamp Enclosures
Pero hemos visto casos¡donde esto no es verdad! La manera más segura y recomendada de hacerlo es quitar físicamente el recinto de la lámpara para inspeccionarla. Debería haber otra etiqueta dentro del recinto… ¡frecuentemente este código es diferente del código fuera de la TV (imagínese…)! Para evitar problemas, tómese 5 minutos y vea el tipo de lámpara.
Si usted tiene una lámpara Philips “Grande”, lo mejor es comprar un adaptador para lámparas Philips (PLA) con una de las lámparas Philips más nuevas…el kit está disponible aquí para órdenes por adelantado . Más información sobre el kit está disponible aquí
Si usted tiene una lámpara Philips “Pequeña”, su major opción es comprar una lámpara de reemplazo original. Lámparas OEM disponibles aquí. Su sitio de confianza, Discount-Merchant.com ha dejado claro que cuenta con el precio más bajo que puede conseguir en lámparas originales. Si usted encuentra un mejor precio, háganoslo saber y Discount-Merchant.com lo mejorará 😉

Join the discussion on Facebook! All your questions, answered! The Screen & Projector Group