We're now Screen and Projector! For updated content, visit ScreenAndProjector.com and follow @screenandproj on social media!
Home › About Us › Page 174

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — 2 Comments ↓

Acer_XD1270D_projector_ACER EC.J2101.001_projector_lampInstall a new Acer XD1270D projector lamp using our step-by-step guide.

Tracking projector lamp life

The Acer XD1270D projector has two different settings that can extend Acer XD1270D projector lamp life. Using the Standard mode expect the Acer EC.J2101.001 projector lamp will last. Using the Eco mode extends the lamp life to 3000 hours. Turn Eco Mode and track the lamp life using the Management/ Lamp Hour Relapse menu

End of life warning signs

Watch for the warning message: Lamp is approaching the end of its useful life in full power opera­tion. Replacement Suggested!” When your Acer XD1270D projector lamp is coming to its end of life, the LAMP indicator will light solid red and automatically shut down. Replace the Acer EC.J2101.001 projector lamp immediately.

Be prepared with an authentic projector lamp

Your Acer XD1270D projector uses the Acer EC.J2101.001 projector lamp. Be sure to buy your Acer EC.J2101.001 projector lamp from an authorized dealer to keep your Acer XD1270D projector working properly. Cheap knock-offs will damage the sensitive optics in your Acer XD1270D projector and have a much shorter life span. These knock off projector lamps are also created with toxic materials that pose a health threat. Authentic OEM are less likely to explode and come with a money-back guarantee as well as keeping your warranty intact. Protect yourself from buying counterfeit lamps.

Find this lamp sold on Amazon by these authorized dealers:

 

Replacing the Acer EC.J2101.001 projector lamp

Before installation follow these important safety steps:

  • Turn off the Acer XD1250D projector and unplug the AC cord.
  • These projectors operate under high temperatures and there is a risk of burning if the projector has not cooled enough. Allow the Acer XD1270D to cool for one hour. It should be cool to the touch.

Acer_XD1270D_projector_ACER-EC.J2101.001_replace_projector_lamp

1. Remove the two screws from the cover.

2 Lift the cover off the projector and place it to one side.

3. Remove the two screws holding the Acer XD1270D projector lamp in place. screw from the cover. Lift the wire handle on the Acer EC.J2101.001 bulb and gently pull the lamp up to remove it.

Don’t throw the old Acer EC.J2101.001 projector lamp into regular garbage as it contains mercury — send it to a local recycling program.

4. Take the new Acer EC.J2101.001 projector lamp using the wire handle. Avoid touching the bare bulb; the oil on your finger can leave a black mark on the lamp affecting the projected image. Tighten the screws on the new Acer EC.J2101.001 projector lamp.

Put the lid back onto the projector. Tighten the screw holding the lid in place. Plug the AC cables back into the projector. Turn the project on so you can reset the lamp timer.

Resetting the projector lamp timer

It’s important to always reset the lamp timer after replacing the projector lamp in your XD1270D projector. You want the projector to track how many hours the lamp has been used and send out warning messages when the Acer EC.J2101.001 reaches end of life.

Acer_XD1270D_projector_ACER-EC.J2101_Management_Menu

 

To reset the Projector Lamp timer:

  • Open the MAIN MENU. Press ENTER.
  • Scroll down to the MANAGEMENT menu. Press ENTER.
  • Scroll down to the Lamp Hour reset option.
  • Press the right arrow.
  • The lamp will be reset to zero.
  • You can set the Eco Mode and Lamp Hours left plus time remaining.

Extending the projector lamp life

Learn more tips for extending lamp life.

 

Acer_XD1250D_Replacement_Bulb_Acer_EC-J2101-001_ projector_lampA green alternative

The Acer XD1270D projector has the option of also just replacing the actual bulb and re-use the plastic cage. This reduces waste and is a great way to green your projector.

Watch our training video to learn more.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

BenQ _MX762ST_projector_5J.J3J05.001_projector_lampThis step-by-step user guide walks you through replacing the BenQ MX762ST projector lamp in 3 easy steps.

NOTE: These instructions are also good for the BenQ MX762 projector.

Step 1: Be ready with an authentic projector lamp

It can be tempting to spend less and install a counterfeit BenQ MX762ST projector lamp bought at a discount place or over the Internet. However, to keep your BenQ MX762ST projector working at its optimum levels you should always use an authentic BenQ 5J.J3J05.001 projector lamp. Generic lamps may promise to work just as well but they don’t and end up costing you more money in the end.

6 reasons to go with authentic projector lamps:

Find this lamp on Amazon from these authorized dealers:

Step 2:

A flashing orange light on BenQ MX762ST projector indicates that the t BenQ 5J.J3J05.001 is reaching end of life the lamp indicator and needs to be replaced. Several warning messsages will begin to appear and you may notice the image deteriorating or the color looking off. When the final warning screen appears you must change the projector lamp immediately.

To check how  many hours the projector lamp has, do the following: BenQ-_MX762ST_projector_5J.J3J05.001_projector_lamp_warning

  • Press MENU/EXIT and then press MODE/ENTER to highlight the SYSTEM SETUP: Advanced
  • Press to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page is displayed.
  • You will see the Equivalent Lamp Hour information appearing on the menu.
  • To leave the menu, press MENU/EXIT.
  • You can also get the lamp hour information on the INFORMATION menu.

Setting the projector to economic mode will extend the projector lamp life.

Step 3: Replace the BenQ 5J.J3J05.001 projector lamp

Before changing the lamp:

  • Reduce the risk of electrical shock by disconnecting the power cord on the BenQ MX762ST projector.
  • Reduce the risk of severe burns by allowing the projector to cool for at least 45 minutes.

BenQ-_MX762ST_projector_5J.J3J05_projector_lamp_remove_cover_screw

 

Loosen the screw holding the lamp cover onto the BenQ MX762ST projector.

BenQ-_MX762ST_projector_5J.J3J05_projector_lamp_remove_cover

Lift up the cover. Remove and dispose of the lamp protection film. Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries.

 

BenQ-_MX762ST_projector_5J.J3J05_disconnect_projector_lamp

Disconnect the projector lamp connector from the projector (Step #2 in diagram). Loosen the screw that secures the BenQ 5J.J3J05.001 projector lamp.

BenQ-_MX762ST_projector_5J.J3J05_remove_old_projector_lampSlowly and gently pull the BenQ 5J.J3J05.001 projector lamp out of the projector. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.

NOTE: The BenQ 5J.J3J05.001 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

 

BenQ-_MX762ST_projector_5J.J3J05_install_new_projector_lampInsert the new BenQ 5J.J3J05.001 projector lamp first into the connector on the projector and reconnect the lamp connector.

BenQ-_MX762ST_projector_5J.J3J05_tighten_projector_lamp_screw

Make sure the handle is fully locked. Tighten the projector lamp screw. If the screw is too loose or too tight, the projector may not turn on.

 

BenQ-_MX762ST_projector_5J.J3J05_projector_lamp_install_coverRe-install the MX762ST lamp cover and tighten the screw.

Reset the total lamp operation timer.

 

 

Reset the projector lamp counter

BenQ-_MX762ST_projector_5J.J3J05_reset_projector_lamp_timerWhen the BenQ 5J.J3J05.001 projector lamp in the BenQ MX762ST projector has been changed the projector lamp timer must be reset:

  • Turn on the BenQ MX761 projector.
  • After the startup logo, open the On-Screen Display (OSD) menu.
  • Go to the SYSTEM SETUP.
  • Scroll over to Advanced > Lamp Settings menu.
  • Press MODE/ENTER to display Lamp Settings page is displayed.
  • Highlight Reset lamp timer. A warning message is displayed asking if you want to reset the lamp timer.
  • Highlight Reset and press MODE/ENTER. The lamp time will be reset to “0”.

Extend the life of the BenQ 5J.J3J05.001 projector lamp last longer with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Use the Lamp Power option on the MX761 projector lamp and set to Economic Mode to reduce the amount of power used but extend lamp life.
  • Learn more with Top tips for extending DLP projector lamp life.

BenQ-MX762ST_projector_5J.J3J05_projector_lamp_Video_guide

Green your BenQ MX762ST projector lamp

The BenQ MX762ST projector projector lamp has the option of replacing only the bulb instead of the entire BenQ 5J.J3J05.001 unit. You re-use the plastic cage and reduce waste. You can green your projector while saving money. Our instructional video shows you how step-by-step.

 

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Sony_VPL-HW40ES_Sony_LMP-H202_projector_lampThis step-by-step instructional guide can help you replace the projector lamp in your Sony VPL-HW40ES projector.

When to replace?

When the Sony VPL-HW40ES projector lamp is reaching its end of life, the Lamp/Cover light on the Sony VPL-HW40ES projector starts flashing red. It will continue to flash in 3 second intervals. while the message “Please replace the Lamp/Filter” appears on the scree. If  lamp dims and the color balance of the picture goes off, you will need to replace the Sony LMP-H202 projector lamp immediately.

Authentic lamps are critical!

Don’t settle for anything but the best for your Sony VPL-HW40ES projector. Always install an authentic projector lamp. When buying look for the seal of approval — don’t get caught with a copycat generic projector lamp! Learn to spot lamps posing as authentic lamps.

6 reasons to avoid generic lamps:

Find this lamp sold on Amazon by these authorized dealers:

Replacing the Sony LMP-H202 Lamp and Air Filter

Sony recommends replacing the air filter at the same as replacing the lamp.

Replacing the Lamp

Sony_VPL-HW40ES_projector_LMP-H202_turning_over_to_replace_projector_lampBefore replacing the Sony LMP-H202 projector lamp let the projector cool at least 30 – 45 minutes. This projector operates under high temperatures and you can get badly burned if the projector has not cooled down.

Unplug the AC power cord on the Sony VPL-HW40ES projector.

The projector lamp cover is on the bottom of the projector so you will need to turn it over. Put down a soft cloth on a flat surface to prevent the projector getting scratched. Turn the projector over gently. Don’t lean on the projector and make sure the surface is flat and stable.

Sony_VPL-HW40ES_projector_LMP-H202_open_projector_lamp_coverUsing a Philips screwdriver, loosen the screw holding the projector lamp cover in place. Slide the projector lamp cover off the Sony VPL-HW40ES projector. Put it to one side.

Sony_VPL-HW40ES_projector_loosen_LMP-H202_projector_lamp_screws

Loosen the 3 screws on the Sony LMP-H202 projector lamp using a Phillips screwdriver. Grab the old LMP-H202 projector lamp by the indented side handles and and pull the lamp straight out. Take care not to bang the lamp as you can cause the bulb to break.

NOTE: The Sony LMP-H202 projector lamp contains mercury and should not be thrown into regular garbage. Recycle this lamp!

To finish the projector lamp installation:

Sony_VPL-HW40ES_projector_loosen_LMP-H202_screws

  • Remove the packaging from the new projector lamp.
  • Lift up the handle and slowly lower the projector lamp into the projector.
  • Push it in securely until it reaches the end.
  • Tighten the three screws on the lamp.
  • Be careful not to touch the optical block inside the projector as this can damage the picture.
  • Also don’t touch the actual bulb in the new lamp as oily fingerprints can burn a black spot on the lamp when it heats up.Sony_VPL-HW40ES_projector_LMP-H202_Close_lamp_cover
  • Slide the lamp cover back onto the Sony HW40ES projector.
  • Close the projector lamp cover and tighten the screws.
    Remember to install the lamp cover properly as the projector will not turn on if the cover is loose or not installed correctly.

Replacing the air filter

Sony_VPL-HW40ES_projector_LMP-H202_remove_filter_holderRemove the filter holder. The air filter will be inside the holder. Don’t touch the fan inside as this can damage the projector.

Sony_HW40ES_Lamp-H202_remove_air_filterRemove the old Sony VPL-HW40ES filter and put it to one side. Attach the new air filter so that is fits into the 10 claws properly on the holder.

Aligning the air filter with the shape of the filter holder will make it easier to install.

Be sure to put the air filter holder back into the projector making sure it aligned up properly. If not, the projector will not turn back on!

Sony_VPL-HW40ES_projector_LMP-H202_clean_ventilation_holes

Wipe off any dust from the ventilation intake holes using a soft cloth. Put the projector back in its original position and turn it on. You’ll need to reset the lamp timer.

Resetting the projector lamp timer

  • Turn the Sony VPL-HW40ES projector back on.
  • Using the remote, scroll down to the Setup Menu.
  • Press Enter.

Sony_VPL-HW40ES_projector_LMP-H202_proejctor_lamp_replacement_message

A Lamp Setting message will appear asking you if the projector lamp has been replaced.

Click on Yes.

Sony_VPL-HW40ES_projector_LMP-H202_Final_lamp_replacement_messageYou will see a confirmation message and the Proejctor Lamp Timer will be automatically reset to zero.

You can see the number of hours left on your lamp by going to the Information Menu.

 

You can extend the life of the Sony LMP-H202 projector lamp by always making sure the filter is clean and there is enough airflow around the projector. Learn how to get a longer projector lamp life with Top tips for extending DLP projector lamp life.

 

Tagged with: ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Optoma_DX319_Optoma_BL-FU185A_SP.8EH01GC01_projector_lampReplace the Optoma DX319 projector lamp with help from our user guide.

Invest in authentic replacement projector lamps

Note: These instructions can also be used with the Optoma DX319P projector.

Be sure to have your back-up replacement Optoma DX319 projector lamp ready so you can replace it immediately when needed. When buying on the Internet, make sure you are buying an OEM and look for the seal of approval. Generic lamps have a shorter lamp life than original lamps and are created with toxic materials. When you buy copy-cat lamps you get no guarantee or refunds and they can damage the sensitive electronics in your projectors. Keep your Optoma DX319 projector working at its best! Learn How to spot a counterfeit.

Find this lamp sold on Amazon by these authorized dealers:

End of life warnings

Optoma_DX319_Optoma_BL-FU185A_SP.8EH01GC01_replacement_warning_projector_lampWhen the Optoma BL-FU185A projector lamp is reaching end of life, you will notice the Lamp-LED light flashing red on the Optoma DX319 projector. A lamp warning message also appears on screen.

If you hear a loud pop when turning on the projector, the Optoma BL-FU185A  projector lamp has broken. Learn what to do if the projector lamp has exploded inside the projector.

4-steps to installing the Optoma BL-FU185A projector lamp

Follow these important safety tips before replacing the Optoma BL-FU185A projector lamp:

  • Switch off the power to the Optoma DX319 projector by pressing the Power/Standby button.
  • Disconnect the power cord.
  • Allow the Optoma DX319 projector to cool down for at least 30 minutes. These projectors run using high temperatures and you can burn yourself badly if you don’t allow the projector to cool down.

Optoma_DX319_Optoma_BL-FU185A_SP_projector_lamp_warningSteps to remove the old projector lamp

1. Use a screwdriver to undo the two screws holding the projector lamp cover in place. The screws on the lamp cover and the lamp cannot be removed.

2. Remove the lid and place to one side. Don’t lose the lid as the Optoma DX319 projector will not turn back on until the lamp cover has been properly installed.

3. Remove the two screws holding the Optoma BL-FU185A  projector lamp in place.

Note: The used Optoma BL-FU185A  projector lamp contains mercury and should be properly recycled. Don’t throw it into regular garbage.

4. Lift up the wire handle on the Optoma BL-FU185A (SP.8EH01GC01) projector lamp and slowly remove it from the projector. Be careful not to bang the lamp against the projector as this may case the bulb to break. Learn how to clean up a broken lamp.

Steps to install the new projector lamp:

1. Remove the new Optoma BL-FU185A (SP.8EH01GC01) projector lamp from its packaging. Taking care not to touch the actual bulb, lift up the handle on the new lamp and insert it gently into the Optoma DX319 projector.

2. Tighten the two screws on the projector lamp.

3. Replace the lamp cover and tighten its two screws.

4. Reset the lamp replacement timer

Reset the Projector Lamp Replacement Timer

Optoma_DX319_Optoma_BL-FU185A_SP_projector_lampThe Optoma DX319 multimedia projector has an automatic projector lamp timer that tracks the numbers of hours left in the lamp. If you don’t reset the lamp replacement timer you run the risk of the lamp being used beyond its recommended life and possibly exploding in the projector.

To reset the Projector Lamp Replacement Timer:

  • Turn on the projector.
  • Using the remote press MENU
  • Select OPTIONS
  • Select LAMP SETTINGS
  • Select LAMP RESET
  • Select YES.
  • Press MENU to exit.

Tips for extending Optoma BL-FU185A (SP.8EH01GC01) projector lamp life:

  • Chose the “STD” mode to to dim the projector lamp and lower power consumption. This will extend the lamp life by up to 130%.
  • Keep your air filters clean to avoid overheating the projector.
  • Every 24 hours, turn off the projector and let it stand for 1 hour
  • Make sure there is enough airflow around the Optoma DX319 projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life.

Green your Optoma DX319 projector

Optoma-BL-FU185A_replacement_bulb_training_videoThe Optoma DX319 projector has the option of re-using the existing lamp cage and replacing only the actual bulb. A great way to reduce and recycle. Watch our Optoma BL-FU185A training video to learn more.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Boxlight_CP-10t_projector_Boxlight_CP13T-930_projector_lampLet our guide help you switch to a new Boxlight CP-10t projector lamp.

Warning messages

When the Boxlight CP10T-930 projector lamp is approaching end of life the LAMP REPLACEMENT lights starts flashing yellow.
You may also notice the image becomes darker or the image color becomes unnatural. Change the Boxlight CP-10t projector lamp immediately when this happens.

The importance of OEM projector lamps

Keep your Boxlight CP-10t projector working at its best by installing an authentic projecot lamp. While it can be tempting to purchase a generic lamp due to their low prices, these copycat lamps will damaged your Boxlight CP-10t. Buy authentic and avoid the serious problems associated with generics.

6 Reasons to avoid generics

Find this lamp sold on Amazon by these authorized dealers:

Replacing the Boxlight CP10T-930 projector lamp

Before replacing the Boxlight CP10T-930 projector lamp follow these safety tips:

      • Disconnect the power cord on the Boxlight CP-10t projector.
      • Reduce the risk of severe burns by allowing the Boxlight CP-10t projector to cool for at least 45 minutes. These projectors operate using high temperatures and you run the risk of severe burns if you don’t allow it to cool down.

Boxlight_CP-10t_projector_Boxlight_CP13T-930_projector_lamp

      • Turn the Boxlight CP-10t projector on its side. Loosen the screw holding the lamp cover in place.
      • Remove the two screws holding the Boxlight CP10T-930 projector lamp in place.
      • Using the wire handle on the Boxlight CP10T-930 projector lamp and gently remove the lamp. Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb shatter.
      • NOTE: Be sure to recycle the Boxlight CP10T-930 projector lamp as contains mercury and should not be thrown into regular garbage. Recycle it!
      • Insert the new CP10T-930 and avoid touching the actual bulb as this can result in black spots from the oil on your hands.
      • Tighten the two screws on the Boxlight CP10T-930 projector lamp . Place the cover back onto the Boxlight CP-10t projector and tighten the lamps screw. You must now reset the lamp timer.

Boxlight_CP-10t_projector_Boxlight_CP13T-930_reset_projector_lamp_timerResetting the Boxlight CP-10t lamp counter

Once the Boxlight CP10T-930 projector lamp has been replaced, you will need to reset the lamp counter so the Boxlight CP-10t projector can accurately track the number of lamp hours remaining:

      • Turn the projector on, and press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button.
      • Another dialog box SETTING MENU will appear.
      • Press the POINT DOWN button and a red-arrow icon will appear.
      • Move the arrow to Lamp age, and then press the SELECT button. The message “Lamp replace monitor Reset?” is displayed.
      • Select [Yes] to reset the Timer.
        When the Lamp Replacement Monitor Timer is reset, the LAMP REPLACEMENT indicator stops lighting.

Learn how to extend the life of the Boxlight CP10T-930 projector lamp by reading  Top tips for extending DLP projector lamp life

Interested in a green alternative?

Boxlight_CP-11t_projector_Boxlight_CP13T-930_Video_InstructionsThe Boxlight CP-10t projector has the option of also just replacing the actual bulb to re-use the plastic cage. This reduces waste and is a great way to green your projector. Watch our training video to learn more.

 

 

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

NEC_M260X_projector_NE_NP15LP_lampThis guide will show you step-by-step how to change the NEC NP-M260X projector lamp.

Be ready with an authentic lamp

Avoid using a generic projector lamp in your NEC NP-M260X projector. Be sure to always install an authentic NEC NP-M260X projector lamp. Generics have been created using toxic materials including Krypton-85 and they are prone to explosions with a shorter lamp life. Installing them often damages the sensitive electronics in your NEC NP-M260Xprojector.

Know when to replace the projector lamp

Watch for the following signs that let you know the NEC NP15LP projector lamp is reaching end of life and needs to be replaced:

  • message on screen reads LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.
  • the LAMP indicator begins to blink red
  • colour looks off
  • picture is faint or has deteriorated

NEC_NP-M260X_check_NECNP15LP_projector_lamp_usageTrack the life of the NEC NP15LP projector lamp with the Usage Time menu.

    • Go to INFO menu
    • Scroll down to USAGE TIME to display the LAMP LIFE REMAINING and LAMP HOURS USED.
    • The progress indicator shows the percentage of remaining bulb life:
    • When the lamp usage reaches 0, the Lamp Life REMAINING starts a count down from 100 hours
    • When the count down reaches 0, the projector will turn off and not turn on.

Find this lamp sold on Amazon by these authorized dealers:

Changing the NEC NP15LP projector lamp

NOTE: New air filters are shipped with the lamp and it’s recommended you replace them at the same time.

Follow these important safety instructions before installing the new NEC NP15LP projector lamp

      • turn off the NEC NP-M260X projector.
      • unplug the projector from its power source.
      • unplug the power cable.
      • wait until the projector is cool to the touch to avoid getting burned.

NEC_NP-M260XNEC_NP16LP_projector_lamp_remove_lamp_screwLoosen the NEC NP-M260X projector lamp cover screw.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_remove_lamp_cover

Push and slide the NEC NP-M260X projector cover off.

NEC_NP-M230X_remove_NEC_NP16LP_projector_lamp_screws

Loosen the two screws holding the NEC NP15LP projector lamp in place. (The screws will not come out only loosen.)

NEC_NP-M260X_remove_NEC_NP16LP_projector_lamp

Remove the projector lamp by holding the indent and pulling up.

NOTE: Your NEC NP15LP lamp should be properly recycled. These lamps contain mercury and can’t be placed into common garbage.

NEC_NP-M260X_projector_lamp_install_new_NEC_NP16LPInstall a new lamp housing into the NEC NP-M260X projector, gently pressing the projector lamp housing into the socket. Take care not to touch the actual bulb as your finger prints can leave oil marks that burn black marks onto the bulb.

NEC_NP-M230X_projector_tighten_NEC_NP16LP_projector_lamp_screws

Push the top center on the projector lamp to secure it. Tighten the screw on the projector lam

NEC_NP-M230X_projector_replace_lamp_cover_NEC_NP16LP_projector_lamp

Re-attach the NEC NP-M230X lamp cover by sliding the cover until it snaps into place. Tighten the screw on the lamp cover.

Replacing the filters

There are four filters in the NEC NP-M260X projector:

      • Honeycomb hard filter – large and small
      • Accordion soft filter — large and small

Replace all four filters at the same time. Before replacing the filters wipe off any dust and dirt that came loose from the old filters. NOTE: The filters are made with two different types of material in the membrane. Both perform the same.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_remove_air_filterPush the catch to release the NEC NP-M260X filter and gently pull it out.

 

NEC_NP-M260X_projector_lamp_NEC_NP16LP_detach_filter_cover

The filter cover is fixed at six separate points in the projector. Bow the filter cover by pushing it slightly until it releases.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_replace_dark_filtersRemove the dark sponge filter and clean the filter unit and cover. Attach the new non-woven white material filters.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_replace_four_filters

      • Filter unit: Attach two honeycomb hard filters to the NEC NP-M260X filter unit.
      • Filter cover: Attach the two accordion soft filters to the filter cover. Be sure to align the accordion slits with the protrusions of the filter cover.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_attach_filter_coverAttach the filter cover back to the filter unit. Align the filter until with the filter cover and push the protrusions into place. Make sure all the six mounting points are aligned properly.

 

NEC_NP-M260X_projector_lamp_NEC_NP16LP_attach_filter

Insert the two catches of the top of the filter into the groove of the cabinet. Push the filter until it clicks into place.

Reset the lamp timer

Once the NEC NP15LP projector lamp and NEC NP-M260X projector filter have both been replaced you will need to reset the timer for both. You want the projector to be able to accurately track the projector lamp life.

NEC_NP-M260X_projector_lamp_NEC_NP16LP_lamp_timer

Clear usage hours and reset hours

      • Plug in the power cored into the wall outlet.
      • Turn on the projector.
      • From the MENU select RESET.
      • Choose CLEAR LAMP HOURS.
      • A confirmation message appears.
      • Select YES.

Reset the filter hours:

      • Scroll up to CLEAR Filter HOURS.
      • A second submenu will appear.
      • Select YES. Press the ENTER button.

Extending the life of the NEC NP15LP projector lamp

Get your newly installed NEC NP15LP lamp will last longer by choosing the ECO option. The ECO MODE increases projector lamp life by lowering the power consumption. There are three modes to choose from:

      • Auto Mode: 4000 hours
      • Normal: 5000 hours
      • Eco ModeL 8000 hours

Learn more tips to extend the life of the NEC NP15LP lamp.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Ask_Proxima_DP-9440_projector_9500_SP-LAMP-004_projector_lampUse this guide to help replace the Ask Proxima DP-9440 projector lamp.

End of life warning signs

Your Ask Proxima DP-9440 projector lamp life may vary between 400 to 500 hours depending on usage and maintenance.

Twenty hours before the lamp reaches its end of life, the “Replace lamp” warning light appears briefly on the projected screen. The Power light on the projector will also be blinking red. Replace the lamp immediately. If you wait the full 20 hours, your projector will not work and the projector lamp will no longer light.

Ask_Proxima_DP-9440_projector_9500_SP-LAMP-004_projector_lamp_hoursTo find out how much time is left on the lamp you can also check the ABOUT screen found on the MAIN Menu. It will list the number of projector lamp hours used.

The authentic projector lamp

There are so many choices on the Internet for a Ask Proxima SP-LAMP-004 projector lamp that finding the correct lamp can be overwhelming. Go with authentic OEM lamps and ignore the sites offering generic “compatible” projector lamps even though they seems to be a great bargain.

This generic lamps are made with counterfeit materials and are prone to explosions, offer poor picture quality and actually have a shorter lamp life than authentic projector lamps. Installing generic lamps into your ASK Proxima C300HB projector will void the warranty leaving you unprotected should any of the sensitive components inside be damaged due to the inferior workings of these lamps. More importantly, these “compatible” lamps are often made with toxic materials such as the carcinogenic Krypton-85. Always look for the seal of approval and watch for telltale signs you are about to purchase a counterfeit lamp.

Find this lamp sold on Amazon by these authorized dealers:

Installing the ASK Proxima SP-LAMP-004 projector lamp

Before installing the ASK Proxima SP-LAMP-004 projector lamp:

Ask_Proxima_DP-9440_turn_off_projector_9500_SP-LAMP-004_projector_lamp

  • Unplug from the electrical socket.
  • Let the ASK Proxima DP-9440 cool down for 60 minutes to avoid burning yourself. It should be cool to the touch.
  • Unplug the AC cord.

Ask_Proxima_DP-9440_remove_projector_9500_SP-LAMP-004_projector_lamp_cover

To remove the projector cover, place a flathead screwdriver into the slot top found on the top of the projector by the right speaker.

Gently slide the small lever toward the right speaker. The projector lamp cover that protects the lamp housing and the lens pops up. The lamp module is on the right.

Ask_Proxima_DP-9440_projector_loosen_9500_SP-LAMP-004_projector_lamp_screws

Loosen the three captive screws on the ASK Proxima SP-LAMP-004 projector lamp module.
Grab wire handle found on the the ASK Proxima SP-LAMP-004 projector lamp handle and pull the lamp from the projector.

The ASK Proxima SP-LAMP-004 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Ask_Proxima_DP-9440_projector_install_new_9500_SP-LAMP-004_projector_lampPlace the new ASK Proxima SP-LAMP-004 projector lamp into the socket being careful not to touch the bare lamp (this can form black spots on the bulb that will ruin the projected image).
Tighten the three  screws holding the ASK Proxima SP-LAMP-004 projector lamp Assembly in place.

Replace the cover over the lamp module by inserting the tabs into the tab bays and pushing the rest of the cover down into place
Put the power cord back into the projector and turn it on.

You are now ready to Reset the Lamp Replace Counter.

 

Ask_Proxima_DP-9440_projector_9500_SP-LAMP-004_reset_projector_lamp_hoursResetting the projector lamp timer

It’s important to reset the projector lamp timer of the ASK Proxima DP-9440 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the projector lamp timer:

 

  • Turn projector on, press MENU to bring up the MAIN MENU will appear.
  • Scroll down to the SERVICE menu. Press ENTER.
  • Scroll down to LAMP RESET. Press ENTER. The lamp counter will reset to zero.
  • You can also simultaneously press the decrease volume and increase volume button on the keypad for 10 seconds. At that point the LED will turn green and you can power on the projector.

Learn more: Top tips for extending DLP projector lamp life.

The green projector lamp

ASK_Proxima_Pro_AV_9500_training_video

The ASK Proxima DP-9440 projector has the option of just replacing the actual bulb and re-use the plastic cage. This reduces waste and is a great way to green your projector.

Watch our training video to learn more.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — 2 Comments ↓

-ex5200_projector_epson_ELPLP58_projector_lampThis guide can help you replace the Epson EX5200 projector lamp.

Keep track of projector lamp life

Epson_EX5200_projector_Epson_ELPLP58_check_projector_lamp_hoursWhen the Epson EX5200 projector lamp is reaching end of life the projector lamp indicator will flash orange and continue flashing until the projector lamp has been changed.

Epson_EX5200_projector_Epson_ELPLP58_projector_lamp_lamp_warningThe message Replace the lamp also appears on the screen. You may also the image on screen gets darker or starts deteriorate altogether. In order to maintain projector brightness and image quality, replace with a new Epson LPLP58  projector lamp as soon as possible.

The Epson EX5200 projector lamp can last for close to 4,000 hours when the power consumption is set to NORMAL and up to 5,000 hours if the ECO option is used. You can check the hours left on the ELPLP58  projector lamp from the INFO Menu access off the Main Menu.

Invest in authentic

You may be tempted to buy a cheaper generic lamp in order to save money. While these knock-off lamps appear to be a bargain, they will actually end up costing you more money in the long run since they a shorter life than original lamps and are prone to explosions. Since they are often created with created with toxic substitute parts they pose a significatnt health hazard and can damage the sensitive optics in your Epson EX5200 projector

Do yourself a favor and buy an authentic Epson ELPLP58 projector lamp from a recognized OEM dealer. When buying look for the seal of approval. Learn to spot copycat lamps posing as authentic lamps.

Find this lamp on Amazon sold by these authorized dealers:

Replacing the ELPLP58  projector lamp

Before replacing the ELPLP58 projector lamp follow these important safety rules:

  1. Always unplug the power cord on the Epson EX5200 projector before replacing the projector lamp.
  2. This projector operates using high temperature. Wait at least 60 minutes before replacing the lamp so you don’t run the risk of getting burned.
  3. Never touch the bare projector lamp bulb as the oil from your fingers will burn black marks onto the projector lamp when it heats up.
  4. Never operate the Epson EX3200 projector with the projector lamp removed.

Epson_EX5200_projector_Epson_ELPLP58_remove_projector_lamp_cover

Remove the projector lamp cover screws and place to one side.

Epson_EX5200_projector_Epson_ELPLP58__remove_projector_lamp_screwsLoosen the two screws holding the Epson ELPLP58 projector lamp in place (you can’t remove them).

Epson_EX5200_projector_Epson_ELPLP58__remove_projector_lamp

Gently lift out the Epson LPLP58 projector lamp taking care not to bang it against the projector. NOTE: The LPLP58 projector lamp contains mercury and should not be thrown into regular garbage. Recycle this lamp!

Epson_EX5200_projector_Epson_ELPLP58_install_new_projector_lampGently insert the new Epson LPLP58 projector lamp. Make sure it fits into the Epson EX5200 projector properly. (Check that it’s facing the right way.)

Tighten the Epson LPLP58 projector lamp. You can know reset the lamp timer.

Reset the lamp timer

Epson_EX5200_projector_Epson_ELPLP58_reset_projector_lamp_timer

After you replace the lamp, you need to reset the Epson EX5200 projector lamp timer using the projector’s menu system.

  • Press the MENU button on the remote control or on the projector’s control panel. You see the main menu.
  • Select the RESET menu. Press ENTER.
  • Scroll down to select RESET LAMP HOURS. Press ENTER.
  • A prompt filed appears asking if you want to reset the lamp timer. Select YES. Press ENTER.
  • Press MENU to exit.

Longer life for the ELPLP58 projector lamp

Extend the life of the Epson ELPLP58 projector lamp with the following tips:

  • Set the Power Consumption to ECO option.
  • Clean the air filters regularly so the Epson EX5200 projector doesn’t overheat.
  • Make sure there is enough airflow around the projector.
  • Turn it off when it’s not in use.
  • Learn more: Top tips for extending DLP projector lamp life.
Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Eiki_POA_LMP39_projector_lampIs your projector compatible with the Eiki POA-LMP39 projector lamp? Check our listto find out.

Before purchasing a Eiki POA-LMP39 projector lamp look for the seal of approval that lets you know you are buying from an authentic manufacturer.

Buy an authentic projector lamp

It’s always best to use an authentic Eiki POA-LMP39 projector lamp. Generics can damage your Optoma projector. Protect yourself from buying counterfeit lamps.

Find this lamp sold on Amazon by these authorized dealers:

6 reasons to avoid generics

Compatible projectors with the Eiki POA-LMP39 projector lamp

Eiki-LC-X4L_projector_lamp_Eiki_610-292-4848_POA-LMP39The Eiki POA-LMP39 projector lamp is compatible with the following Eiki projectors:

For step-by-step instructions on replacing your Eiki POA-LMP39 projector lamp, click on your projector listed below:

Eiki LC-SX4Li_POA_LMP39Extend the life of the Eiki POA-LMP39 projector lamp

Get more hours from your Eiki POA-LMP39 projector lamp by following these maintenance tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Eiki  projector and let it stand unused for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted
  • Learn more with Top tips for extending DLP projector lamp life.

Save money, go green

Video_Changing_Lamp_for_Eiki_SX4LA_projector_lampLooking for a green alternative? Try replacing only the Eiki POA-LMP39 bulb and re-using the same projector lamp cage. You save money and reduce waste.

Watch our how to video guide to learn more.

Tagged with: , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Canon_LV-LP17_9015A001_projector_lampIs your projector compatible with the Canon LV-LP17 projector lamp? Scroll down to see if your projector is listed.

Before purchasing a Canon LV-LP917 projector lamp look for the seal of approval that lets you know you are buying from an authentic manufacturer.

Buy an authentic projector lamp

It’s always best to use an authentic Canon LV-LP917 projector lamp. Generics can damage your Optoma projector.

6 reasons to buy authentic and avoid generics

Protect yourself from buying counterfeit lamps.

Compatible projectors with the Canon LV-LP17 projector lamp

The Canon LV-LP917 projector lamp is compatible with the following Cannon projectors:

Canon_LV-7555_projector_LV-LP17_lamp

 

For step-by-step instructions on replacing your Canon LV-LP917 projector lamp, click on your projector listed below:

Canon_LV-7555U_projector_Canon LV-LP1_ 9015A001_projector_lamp

  • Click here for step-by-step instructions on how to change the Canon LV-LP917 projector lamp for the Canon LV-7555E projector.

  • Click here for step-by-step instructions on how to change the Canon LV-LP917 projector lamp for the Canon LV-7555FU projector.

    Tips for longer projector lamp life:

    • Avoid frequent on and offs to avoid power surges.
    • Don’t let the projector overheat as this puts stress on the lamp. Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
    • Let the projector stand unused for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
    • Keep the air filters clean and free of dust so it can do its job and keep the projector lamp for overheating.
    • Using “Eco mode” or “Lamp Economy Mode” reduces lamp brightness by 20% while extending the lamp life by 50%.
    • Learn more with Top tips for extending projector lamp life.

Replace just the bulb

Canon_Bare_Lamp_Replacement_Video

If you would like to save some money try replacing only the Canon LV-LP17 bare lamp rather than the entire lamp unit. You recycle the plastic cage and reduce waste. Watch our Canon LV-LP17 replacement video to learn how.

Tagged with: , , , , ,
Join the discussion on Facebook! All your questions, answered! The Screen & Projector Group