We're now Screen and Projector! For updated content, visit ScreenAndProjector.com and follow @screenandproj on social media!
Home › About Us › Page 25

by avatarShelagh McNallyPosted on Posted in Articles, Counterfeit Lamp Awareness, FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Why worry about labeling on a replacement projector lamp?

LAMP2
You want the best replacement projector lamp not only to keep your projector working but also to protect your health and safety. When shopping for your replacement projector lamp it pays to pay attention to the label, especially when buying over the Internet.

philips_logo

Labels and quality

You’ll often see replacement projector lamps labeled as either OEM (Original Equipment Manufacturer), compatible or generic lamps. While price can be a deciding factor, the cheapest lamp usually ends up costing more in the long run due to quality and performance issues.

OEM gold standard

OEM original projector lamps deliver the best performance and safety. The technology used for DLP projectors and RPTVs is a collaborative effort between two key companies. Texas Instruments (TI) invented the actual DLP technology while Philips created the UHP lamp used in DLP technology. Both companies have spent countless hours on research and development to perfect their inventions.

Top brands such as Sony, InFocus, BenQ, Sanyo (now Panasonic), Toshiba and Epson use these OEM bulbs to create the lamps needed for each of their particular projector. OEM lamps are of the highest quality offering the brightest luminosity, longest durability, best color and highest safety. These lamps remain the gold standard.

anatomy_lamp_labels

OEM Compatibale

OEM compatible lamps are replicas of the same lamp but manufactured by a different company. Usually the original bulb created by either Philips, Osram, Epson, Ushio, and Panasonic is placed into a lamp housing. Philips has 60% of the market of OEM original Front Projector Lamps. Osram does about 30% of the manufacturing and the 10% comes from Japanese manufacturers.

OEM compatibles are the most economic in the long run as well as being the most reliable since they have calibration, brightness, design and specifications designed to work with your specific projector. The difference is they are not individually measured or tested. In general an OEM compatible projector lamp lasts 3-4 times longer than counterfeit lamps.

Generic Lamps

The widest range of lamp quality is found with generics. The best generics are created with a well-manufactured bulb and lamp housing that matches the specifications of an OEM original within a specified budget but they don’t contain any original Philip parts. Certain specialized companies such Discount Merchant have been approved by Philips to create their own lamp cages for the original bulbs.

Generics do cost less but are not a bright and do have a much shorter lamp life.  They must be replaced sooner and this may actually eat up any initial savings. You also must be more cautious buying generics to ensure you are purchasing from a reputable manufacturer.

Protect_your_eyesight_DLP_projectorsShort-lived Counterfeit Lamps

Counterfeit projector lamps are produced quickly without any attention to specifications or OEM technology. Since these manufacturers don’t have access to DLP technology, equipment or materials needed to create an OEM projector lamp, they often use toxic substitutes. They also take short cuts and forego important safety measures such as UV coated reflectors that protect our eyesight from intense DLP light.

Often they are labeled as having original OEM bulbs, in order to sell them. While the low price can be tempting, they can be a poor choice because they are prone to overheating and exploding, sometime causing irreversible damage to a projector. Any cost savings can be quickly eaten up since counterfeit lamps have a significantly shorter life span. Installing a counterfeit lamp from a company unrecognized by the industry usually voids any warranties so repairs will not be covered.

Find out more about counterfeits:

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — 2 Comments ↓

Vivitek_D963HD_projectorFollow this guide when it’s time to replace the Vivitek D963HD projector lamp.

Warning signs

When you notice the Vivitek D963HD Power LED flashing 5 times consecutively, your projector lamp is reaching its end of life and needs to be replaced immediately.

Invest in authentic

Be sure the purchase an authentic projector lamp for your Vivitek D963HD projector. Avoid knock-off counterfeit lamps. Not only do they have a shorter lamp life than original lamps they also been created with toxic substitues such as Krypton-85. Because they are prone to explosions counterfeit lamps often damage the sensitive electronics in your projectors. Invest in authentic.

Find this lamp sold on Amazon by this authorized dealer:

Replacement Lamp with Housing for VIVITEK5811116701-S with Philips Bulb Inside

Replacing the projector lamp

The Vivitek D963HD projector uses the Vivitek 5811116701-SVV projector lamp. Before changing the Vivitek D963HD projector lamp:

  • Reduce the risk of electrical shock by disconnecting the power cord on the Vivitek D963HD projector.
  • Reduce the risk of severe burns by allowing the projector to cool for at least 45 minutes.

1116701-SVV_replace_projector_lamp

Vivitek_D963HD_Replace_Vivitek_5811116701-SVV_lamp

  • Loosen the captive screw holding the lamp cover in place.
  • Slide the lamp cover off and place it to one side.
  • Remove the tw0 screws holding the Vivitek 5811116701-SVV projector lamp in place.
  • Remove the two captive screws holding the lamp cover place.
  • Remove the lamp cover and place it to one side.
  • Remove the three screws holding the Vivitek 5811116701-SVV projector lamp in place.

NOTE: The Vivitek 5811116701-SVV projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Vivitek_D963HD_install_Vivitek_5811116701-SVV_lampTo finish the installation:

  • Take the new Vivitek 5811116701-SVV projector lamp out of its packaging. Lift up the wire handle and gently guide it into the Vivitek D963HD projector.
  • Take care not to touch the actual bulb as the oil from your fingers can leave a smudge that will burn into a black spot when the projector heats up.
  • Tighten the lamp screw.
  • Re-install the Vivitek D963HD projector lamp cover and tighten the screw.
  • Reset the total lamp hour timer.

Resetting the Vivitek D963HD Lamp Hour Timer

Vivitek_D963HD_Vivitek_5811116701-SVV

It’s important to only reset the lamp timer when the Vivitek 5811116701-SVV(5811100760S) projector lamp has been replaced.

Resetting the projector lamp timer without changing the lamp can make it work beyond its recommended hours and cause harm to your Vivitek D963HD projector.

  • Press the Menu button to open the OSD menu.
  • Press left/right arrow keys to move to the Advanced menu.
  • Press up/down arrows to move to the Lamp menu.
  • Press Enter.
  • Using the or up/down arrow keys to move down to the Reset Lamp Timer menu.
  • Press Enter.
  • Vivitek_D963HD_Vivitek_5811116701-SVV_Lamp-timerA message will appear saying the Lamp Hour has been reset to zero.
  • Press the Menu button to return to the main menu.

 

Extending the life of the projector lamp:

  • Keep your air filters clean to avoid overheating the projector.
  • Use the Lamp Power option on the Vivitek D963HD projector and set to Eco Mode to reduce the amount of power used but extend projector lamp life.
  • Learn more with Top tips for extending DLP projector lamp life.

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Eiki_lc-xbl20This guide shows you how to replace the Eiki LC-XBL20 projector lamp.

When the Eiki LC-XBL20 nears the end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. When Mode 2 is selected in the Lamp life control menu, the lamp replacement icon appears on the screen, and the projector is turned off automatically after 3 minutes. The Lamp replacement icon will not appear when the Display function is set to Off, during Freeze, or No show.Eiki_lc-xbl20_LampReplace

Buy authentic

If the price projector lamp you’re about to buy seems like an incredible bargain, chances are it’s counterfeit and has been created using inferior parts that can damage the inside of your projector since it will not fit properly. Buying a knock-off lamp will also void your warranty and should anything happen to the projector you will not be covered. These lamps are also toxic materials and carcinogenic parts including Krypton-85 and unfortunately also prone to explosions.

Protect your health and the life of your projector. Invest in authentic.

Find this lamp on Amazon sold by these authorized dealers:

 

How to replace the Eiki LC-XBL20 projector lamp

The Eiki LC-XBL20 projector uses Eiki POA-LMP132 projector lamp.

Before installation:

  • Turn off the projector and unplug the AC cord.
  • Allow the Eiki LC-XBL20 projector lamp projector to be cool to the touch. This can take between 45 to 60 minutes. Don’t open the projector when hot since these machines operate under high temperatures and you can burn yourself.

1. Remove the lamp cover fiki_LC-XBL20_projector_lamp_replacement_Sanyo_POA-LMP132or the Eiki LC-XBL20 projector. Loosen the screw to remove the cover.

2. Loosen all three screws holding the lamp cage in place. Grab the handles on the lamp cage and gently lift the lamp out of its socket. Place to one side.

NOTE: These lamps contain mercury and should be properly recycled. Don’t put it into the regular garbage.

3. Take the new Eiki POA-LMP132 projector lamp by the handle—avoid touching the lamp surface as oil from your fingers can cause black spots to appear when the projector is turned on. Gently maneuver the lamp into place. Don’t force the lamp as this may damage it.

4. Once the lamp is in, tighten all three screws on the Eiki POA-LMP132 Lamp Assembly. Make sure the screws have been tightened properly or the Eiki LC-XBL20 projector will not turn on.

5. Replace the Lamp Cover and tighten the screw.

Resetting the Eiki LC-XBL20 Lamp Timer

Resetting the lamp timer mode allows your projector accurately track the number of hours left in your Eiki POA-LMP132 projector lamp.

Eiki_LC-XBL20_projector_lamp_replacement_Sanyo_POA-LMP132_LampCounter

  • Turn the Eiki LC-XBL20 on.
  • Press the Menu option to display the On-Screen Menu.
  • Press Point left/right button(s) to move a red frame poster to Setting Menu icon.
  • Press the black arrow point button to move the red framed pointer to the Setting Menu Icon.
  • Press Point Down button to move the red frame pointer to Lamp counter reset.
  • Press the Select button.

 

Eiki_LC-XBL20_projector_lamp_replacement_Sanyo_POA-LMP132_LampReset-3

  • Another confirmation dialog box appears, select YES.
  • The Lamp box will disappear and the Lamp Replace Dialog box appears.
  • Select YES to reset Lamp Replace Counter.
  • There are two modes for Lamp life control. Mode 1 lets the lamp be turned on even after exceeding the recommended total hours of use. Mode 2 lets the lamp be turned on even after exceeding the recommended total hours BUT the projector turns off automatically after 3 minutes.

 

NOTE: When you reset the Lamp Replace Counter the Lamp Replace indicator stops lighting.

Extend the life of the projector lamp

Get more hours from your Eiki POA-LMP132 projector lamp by following these maintenance tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Eiki LC-SX4UE projector and let it stand unused for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life.

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Infocus_IN114_projectorInstall a replacement Infocus IN114 projector lamp using this guide.

Why go with authentic

Buy an authentic replacement projector lamp and avoid the headaches associated with counterfeit lamps. Find the 6 most common problems associated with counterfeits at the end of this post.

Find this lamp on Amazon:

Install the replacement projector lamp

Your InFocus IN114 projector needs the InFocus SP-LAMP-069 replacement projector lamp. Follow these important safety steps BEFORE installing the replacement

  • Turn off the InFocus IN114 projector and unplug the power cord.
  • To avoid getting burned, let the projector fully cool before changing the lamp.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

nfocus_-IN114_projector_remove_InFocus_SP-LAMP-069__projector_lamp_cover

  • The projector lamp cover is found on top of the InFocus IN114 projector. Loosen the side screw of the projector lamp door. Slide the door forward and lift off. Place to one side.Infocus_IN114_projector_replace_InFocus_SP-LAMP-069_projector_lamp
  • Loosen the two captive screws on the projector lamp.
  • Carefully lift the lamp straight up and off of the alignment pins. Avoid pinching the projector lamp connector.
  • NOTE: The InFocus SP-LAMP-069 contains mercury and should not be thrown into regular garbage. Recycle this used lamp!
  • Install the new lamp module by aligning the pins properly. Be sure to keep the lamp connector free so it doesn’t get pinched.
  • Tighten the screws. NOTE: If the pins have not been aligned properly, the screws will not tighten securely.
  • Align the hinges on the lamp door with the projector. Place the projector lamp door down and lock into place. Replace the lamp door screw and tighten securely. You can now reset the projector lamp hours

Reset Lamp timer

Each time you change the InFocus IN114, you’ll need to reset the lamp timer so the projector can track the number of hours the InFocus SP-LAMP-069 has been used. To reset the timer:

Infocus_-IN114_projector_reset_InFocus_SP-LAMP-069_projector_lamp_timer

  • Plug in the InFocus IN114 power cord.
  • Press the Power button to turn the InFocus IN114 projector back on.
  • Navigate to the Advanced Menu > Status/Service menu.
  • Select Reset Lamp Hours. Press Enter.
  • Hour will be reset to zero.

Tips for longer lamp life

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the InFocus IN114 and let it stand for at least one hour ever 24 hours.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Top tips for extending DLP projector lamp life

Top reasons to avoid counterfeit lamps:

Buy from a legitimate source to keep your projector under warranty and working properly.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

hitachi_cp-rx78

This step by step guide shows how to replace the Hitachi CP-RX78 projector lamp.

Tracking projector lamp life

Keep track of the Hitachi CP-RX78 projector lamp life so you’ll know when to replace the projector lamp. Watch for these signs that indicated the projector lamp is reaching its end of life:

  • The Power and Lamp Indicators will begin blinking.
  • Color tone on the screen may also appear weak or washed out.
  • Picture has poor color quality.

Find this lamp on Amazon sold by these authorized dealers:

 

Install the replacement projector lamp

Before installing the replacement Hitachi DT01022 follow these important safety tips:

      • Turn off the Hitachi CP-RX78 projector.
      • Unplug the power cord.
      • Allow the projector to cool for at least 45 minutes. It should be cool to the touch. This projector works using high heat and there is danger you can be burned.
      • NOTE: If the projector is mounted on the ceiling, don’t stand underneath the projector while opening the cover.

Hitachi_CP-RX78_projector_lamp_Hitachi_DT01022_cover

      • Loosen the screw (marked by arrow) of the lamp cover and then slide the lamp cover to the side to remove it.
      • Hitachi_CP-RX78_projector_lamp_Hitachi_DT01022_remove_coverLoosen the 3 screws (marked by arrow) of the projector lamp, and slowly pick up the lamp by the handles. Be careful not the bang the lamp.

NOTE: The Hitachi DT01022 projector lamp contains mercury and must be recycled properly. Don’t place in regular garbage.

Hitachi_CP-RX78_Install_projector_lamp_Hitachi_DT01022_reset_lamp_timer

      • Insert the new lamp, taking care not to touch the actual bulb. Oil in your fingers will cause a dark spot on the lamp when it heats up.
      • Tighten the 3 screws of the Hitachi DT01022 projector lamp that were loosened to remove the old projector lamp.
      • Slide the lamp cover back in place and firmly fasten the screw of the lamp cover.
      • Turn on the projector and set the lamp timer

To reset the projector lamp timer:

Reset the projector lamp time only when you have replaced the lamp so the Hitachi CP-RX78 projector can properly track the lamp life. Otherwise you run the risk of using the lamp beyond its lamp life. Hitachi CP-RX78_projector_lamp_Hitachi_DT01022_reset_lamp_timer

      • Press the MENU button
      • Scroll down to the GO TO ADVANCED MENU option. Press ENTER
      • Scroll down to the OPTION menu in the left column and press ENTER.
      • Scroll down to LAMP TIME. Press ENTER To make a dialogue field appear
      • Scroll up to the RESET option on the dialogue box.
      • The lamp setting will be set to zero.

Why avoid buying counterfeits

Despite their bargain prices, counterfeits have a number of major problems:

Invest in authentic lamps

Your Hitachi CP-RX78 projector uses the Hitachi DT01022 projector lamp. Only an OEM authentic replacement projector lamp will keep your projector working. Look for the seal of approval before purchasing. Learn to spot copycat lamps posing as authentic lamps.

Green your projector

Hitachi_bulb_only_lamp_Hitachi_DT01022

Recycle your lamp housing by only replacing the Hitachi CP-RX78 bulb. Our training video shows you how to do it. It’s easy!

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — 2 Comments ↓

panasonic_pt-dz6700This guide shows you how to replace the Panasonic PT DZ6700 projector lamp.

When to replace

You can check the duration of usage time using the LAMP1/LAMP2 options on the STATUS option found on the PROJECTOR SETUP Menu.When it’s time to replace the Panasonic PT DZ6700 projector lamp you may see the following signs :

  • The projected image gets darker or starts to deteriorate.
  • A message appears saying to replace the lamp when the projector is turned off
  • The projector lamp warning light flashes red.

change_lamp-warning

When over 1800 hours of use, the message REPLACE LAMP is displayed in the upper left hand corner of the screen for 10 minutes. Press any button on the menu to clear the screen.

When the lamp has been used over 2000 hours the message will stay on screen until the lamp is replaced.

Buy this lamp on Amazon sold by these authorized dealers:

  • Panasonic PT-DZ6700 Projector OEM Compatible Twin-Pack Projector Lamps
  • PANASONIC PT-DZ6700 Projector Replacement Lamp with Housing

Replacing the projector lamp

Your Panasonic PT DZ6700 uses the Panasonic ET-LAD60. Before replacing the projector lamp follow these important safety step:

  • Press the POWER OFF button on the Panasonic PT DZ6700 projector.
  • Unplug the projector Press MAIN POWER to OFF.
  • The projector should be cool to the touch. Don’t attempt to change the lamp if the projector is still hot or you run the risk of being burned.

Panasonic_PT-DZ6700_replace_ET-LAD60-projector-lamp-1Using a screwdriver, loosen the screw holding the projector lamp cover. Slide the lamp unit cover to the buttons and pull to remove. Panasonic_PT-DZ6700_installing_ET-LAD60-projector--lamp

Remove the two screws keeping the Panasonic ET-LAD60 in place. Using the lamp handles, pull the lamp out.

NOTE: The Panasonic ET-LAD6 projector lamp contains mercury and should be properly recycled. 

Panasonic_PT-DZ6700_replace_E

Hold the handle of the Panasonic ET-LAD60 projector  lamp unit and place it in the right direction into the projector. Press into the lamp unit until it clicks into place. After making sure the projector lamp is installed securely, tighten the two screws keeping the light in place.
Attach the lamp unit cover and tighten the lamp cover.
Slide the lamp unit cover to the hinge side and push
in to attach securely.
Make sure the fan electric power connector of the
lamp unit cover is inserted
securely to the projector’s
connector. You are ready to reset the lamp timer.

Reset the lamp timer

  1. Press the Power button so that a picture is projected onto the screen
  2. Press the Menu button to display the “Main Menu”, and then press the F or G button to select “Option”
  3. Press the Enter button to display the “Option” menu, and then press the 5 or 6 button to select “Lamp Runtime”
  4. Press and hold the Enter button for approximately 3 seconds
  5. The “Lamp Runtime” will change to “Time Reset [Power Off]”
  6. Turn off the power and disconnect the power cord

The importance of authentic lamps

It’s easy to get duped into buying an inferior knock-off lamp posing as an authentic lamp. Buyer beware! Always look for the seal of approval and watch for telltale signs you are about to purchase a counterfeit lamp

Learn more tips for extending the projector lamp life in your Panasonic PT DZ6700 projector.

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Smartboard_SB680i1_projector

Time to replace the Smartboard 680i3 projector lamp? Don’t stress out. This guide gives step by step instructions.

It’s time to replace the Smartboard 680i3 projector lamp when the projected image gets darker or starts to deteriorate.

Keep your projector working

An authentic projector lamp makes all the difference in keeping your Smartboard 680i3 projector working. Avoid the temptation of buying a cheaper projector lamp since it won’t be properly manufactured. Bargain basement prices mean problems down the road. Scroll for the for the 6 main reasons to avoid counterfeit lamps. Read the 7 Ways to Spot a Counterfeit Lamp to learn more about avoiding counterfeit lamps.

Find these lamp on Amazon sold by these authorized dealers:

Changing the Smartboard 680i3 projector lamp

Your Smartboard 680i3 projector using the SmartBoard 20-01032-20 projector lamp.

Important Safety tips BEFORE replacing the projector lamp:

  1. Close the projector lens door to prevent scratching or touching of the lens.
  2. Press the power button twice on the ECP (extended control panel) or on the remote to put the system in Standby mode The power button light on the ECP turns solid amber when the system is in Standby.
  3. Turn off the power switch and disconnect the power cord and all connected cables.
  4. This projector operates under high temperature and there is a burn risk so be sure to wait at least one hour minutes for the projector’s housing to completely cool.

Step 1: Remove the projector plate assembly from the boom

Smartboard_680i3_Smartboard_-20-01032-20_-replace_-projector_lamp_cover

  1. To remove the projector from the boom, brace the projector with one hand and unscrew the thumbscrew connecting the projector plate to the boom. Be careful not to put any pressure or weight on the projector. Place the thumbscrew to one side.
  2. Carefully unhook the hinges on the plate assembly from the connecting flange hook on the boom Smartboard_680i3_Smartboard_20-01032-20_remove-projector_lamp_cover
  3. Lay the projector on a flat surface and loosen the three screws connecting the projector plate to the projector. Put the screws in a safe place.
  4. Turn the projector back over so it’s face up with the warning lights and setting buttons face upwards.

Step 2: Removing the old lamp

Smartboard_680i3_Smartboard_-20-01032-20_-remove_projector_lamp_cover

  1. Smartboard_680i3_Smartboard_20-01032-20_remove_new_projector_lampLoosen the two screws on the outer lamp cover with a Phillips No. 2 screwdriver. These screws cannot be removed. Raise the outer lamp cover using a flat screwdriver or your finger. Keep the outer lamp cover in a safe place.
  2. Loosen the screw on the inner lamp cover. Remove the screw and raise the inner lamp cover out of the lamp slot using a flat screwdriver or your finger. Keep the inner lamp cover and the screw in a safe place.
  3. Loosen the three screws holding the SmartBoard 20-01032-20 projector lamp in place. Rotate the handle on the old lamp so it faces upwards.
  4. Press on the tab and pull up with the handle on the old lamp. Release the tab. NOTE: The SmartBoard 20-01032-20 projector lamp contains mercury and should properly recycled and NEVER thrown into regular garbage.

Inserting the new lamp

Smartboard_680i3_Smartboard_-20-01032-20_-replace_-projector_lamp

  1. Remove all packaging from the new SmartBoard 20-01032-20 projector lamp. Press the tab, put the new lamp into the lamp slot, and push it all the way down. Release the tab.
  2. Tighten the three lamp screws on the SmartBoard 20-01032-20 projector lamp.
  3. Put the inner lamp cover back on and secure the inner lamp screw back into the lamp slot. Tighten the screw to ensure the lamp cover is secure.
  4. Put the outer lamp cover back into its original position. Align the cover and tighten the screws until the outer lamp cover is secure.

To replace the projector plate assembly on the projector boom

Smartboard_680i3_Smartboard_-20-01032-20_-replace_-projector_lamp_cover

  1. Attach the projector plate to the projector using the three original screws removed during the projector plate disassembly.
  2. To place the projector back into the boom, attach the projector plate hinges into the corresponding flange hook on the projector boom. Be sure to hold the projector plate assembly firmly in place while connecting it to the boom.
  3. Pass the threaded rod through the attachment hole on the projector boom, and then secure the projector by attaching and screwing the thumbscrew.
  4. Connect the power cord and all the connector cables. Open the projector lens door. Reconnect the projector to the power and turn it on. You will need to realign the image. Does this by holding onto the projector and turning the thumbscrew to adjust the level postion.
  5. You must reset the lamp timer.

Resetting the lamp timer

  1. Press the power button on the ECP or remote twice to put the projector back into Standby mode. The power button light on the ECP turns solid amber when the projector is in Standby.
  2. Press and hold the up button on the remote control for approximately 10 seconds. When the projector beeps, press and hold the down button on the remote control for approximately 10 seconds. The lamp timer clears after another beep.
  3. Press the power button on the ECP or remote to start up the system. The power button light on the ECP turns solid green when the system starts.
  4. To confirm that the lamp timer has been reset, press the MENU button on the remote control. Scroll to the Status Display menu heading, and then confirm that 0 h appears in the Lamp timer field. Your lamp reset count has increased by one.
  5. Wait five minutes for the projector lamp to warm up.
  6. Put the system back into Standby mode by pressing either the ECP power button on the projector or on the remote. The power button light will flash amber when the projector is in Standby mode.
  7. Once the projector is in Standby mode, turn the master power switch off and then on again. The projector is now ready to use.

6 reasons to avoid generic lamps:

Learn how to extend the life of your SmartBoard 20-01032-20 projector lamp with Top tips for extending DLP projector lamp life

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

This guide acer_ph730shows how to replace the Acer PH730 projector lamp.

When to replace

The Acer PH730 projector will detect the lamp life for the Acer PH730 projector lamp and show the warning message: Lamp is approaching the end of its useful life in full power operation. Replacement Suggested! Other signs of end of life include a faded picture or distorted colours on screen. The power lamp will also begin flashing amber. Replace the projector lamp immediately.

Buy this lamp on Amazon sold by these authorized dealers:

ACER PD727 Replacement Projector Lamp EC J2901 001

The importance of authentic

Counterfeit “compatible” lamps may appear to be a bargain but actually cost more in the long run.  The few dollars you save with counterfeit “compatible” lamps are not worth it in the long run. Save yourself unnecessary headaches — buy a Acer EC.J3001.001 projector lamp from a recognized dealer. You’ll be getting a far superior product with a replacement guarantee and tech support.

Reasons for not buying counterfeit projector lamps:

How to replace the projector lamp

The Acer PH730 projector uses the Acer EC.J3001.001 projector lamp. Before installation make sure the projector is cool to the touch before replacing the projector lamp. There is a risk of burning if the projector has not cooled sufficiently.

Acer_PH730_projector_Acer-EC.J3001

NOTE: Projector lamps contain mercury and should be properly recycled.  Don’t put these lamps into regular garbage.

1. Turn the power off on the projector. Unplug it from the power source.

2. Push up and remove the projector lamp cover.

3. Remove the 3 screws from the Acer PH730 projector lamp.

4. Lift the wire handle on the Acer EC.J3001.001 bulb and gently pull the lamp up to remove it. Be careful not to touch the actual lamp since your oil on fingertips can burn blackspots which will show up on the screen. Treat the lamp gently so it doen’t break. If it does break, here’s what to do. Place the new lamp into the Acer PH730 projector. Tighten the screws on the new Acer EC.J3001.001. Place the lid back onto the projector. You are now ready to reset the projector lamp timer.

Resetting the projector lamp timer

Acer_PH730_projector_Acer-EC.J3001_reset_lamp_timerIt’s important to always reset the lamp timer after replacing the projector lamp in your Acer PH730 projector. You want the projector to track how many hours the lamp has been used and send out warning messages when the Acer EC.J3001.001 reaches end of life.

 

To reset the Projector Lamp timer:

  • Open the MAIN MENU. Press ENTER.
  • Scroll down to the MANAGEMENT menu. Press ENTER.
  • Scroll down to the Lamp Hour reset option.
  • Scroll over to PRESS.
  • Choose “Yes ”to resert the lamp hour
    counter to 0 hours.
  • Press the right arrow.
  • The lamp will be reset to zero.

Extending the projector lamp life

Learn more tips for extending lamp life.

 

Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

PowerLite Home Cinema 750HD_projector

Follow this guide when it’s time to replace the Epson PowerLite Home Cinema 750 HD projector lamp.

Why invest in authentic projector lamps

An authentic projector lamp makes all the difference in how your Epson PowerLite Home Cinema 750HD performs. Look for the seal of approval before buying your Epson 750HD projector lamp. Keep reading for the 6 reasons to avoid counterfeit lamps. Read the 7 Ways to Spot a Counterfeit Lamp.

 

Find this lamp on Amazon sold by these authorized dealers:

Watching for end of life

It’s time to replace the Epson PowerLite Home Cinema 750HD projector lamp when the following signs are seen:

  • The projected image gets darker or starts to deteriorate.
  • A message appears saying to replace the lamp when the projector is turned off
  • The projector lamp warning light flashes orange.

Installing the Projector Lamp Replacement

The Epson PowerLite Home Cinema 750HD uses the Epson ELPLP67 projector lamp replacement.

Before installation:

  • Turn power button off wait for light to stop flashing.
  • Turn off power switch on Epson PowerLite Home Cinema 750HD projector.
  • Unplug the power cord.
  • Allow the Epson PowerLite Home Cinema 750HD projector to cool for one hour. It should be cool to the touch before changing the projector lamp.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

Installing the Epson ELPLP67 projector lamp

PowerLite_Home-Cinema_750HD_Epson_ELPLP67_replacement_lampLoosen the lamp cover screw and slide the 750HD projector lamp cover off.

PowerLite_Home-Cinema_750HD_Epson_ELPLP67_remove_projector_lampLoosen the two screws holding the Epson ELPLP67 projector lamp in place.

NOTE: The Epson ELPLP67 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

PowerLite_Home-Cinema_750HD_Epson_ELPLP67_replacement_projectors_lamp_step2Grab the Epson ELPLP67 projector lamp by the wire handle and gently pull the sprojector lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen. Gently insert the Epson ELPLP67 projector lamp making sure it’s facing the right way.

PowerLite_Home-Cinema_750HD_Epson_ELPLP67_insert_new_replacement_lampTighten the screws on the new Epson ELPLP67 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the Epson PowerLite Home Cinema 750HD projector lamp cover. You a ready to reset the projector lamp timer.

 

Reset the projector lamp timer

Reset the Epson PowerLite Home Cinema 750HD projector Lamp Replacement Counter only when the Epson ELPLP67 projector lamp has been replaced.

PowerLite_Home-Cinema_750HD_Epson_ELPLP67_rest_lamp_timer

  • Press the MENU button on the remote control. The Lamp Reset Menu will appear.
  • Scroll down to the RESET LAMP HOURS. Press ENTER.
  • A prompt appears asking if you want to RESET LAMP HOURS?
  • Select YES and press ENTER.
  • Press MENU to exit.

Prolong the life of the Home Cinema 750HD projector lamp:

Extend the life of the newly installed Epson ELPLP67 projector lamp with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite Home Cinema 750HD projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

6 reasons to avoid generic lamps:

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

DUKANE_I-PRO-8762_projectorThese instructions show how to change the Dukane I-PRO 8762 projector lamp.

Step 1: Recognize the end of life signs

When the Dukane I-PRO 8762 projector lamp has reached 2000 hours of service (or 2500 hours when in Eco mode), the LAMP indicator on the projector will blink red. Replace the projector lamp immediately. An onscreen message will appear: The lamp has reached the end of its usable life. Please replace the lamp.  The projector will turn off and go into standby mode after 2100 (up to 2600 hours in Eco mode) hours of service. Change the projector lamp immediately.

Find this lamp on Amazon sold by this authorized dealer:

Lutema 456-8762 Dukane 456-8762 LCD/DLP Projector Lamp (Philips Inside)

Step 2: Buy an authentic lamp

The Dukane I-PRO 8762 projector uses the Dukane 456-8762 projector lamp. To keep your projector working at its best, be sure to install an authentic projector lamp. Look for the seal of approval before purchasing and avoid buying counterfeit lamps. See below for 6 good reasons why to avoid counterfeit projector lamps.

Step 3: Replace the projector lamp

Before installing the new projector lamp, follow these important safety steps:

  • Turn the power off on the Dukane I-PRO 8762 projector.
  • Disconnect the power cord.
  • Allow the Dukane I-PRO 8762 projector to cool down for at least 30 minutes.  Trying to change the lamp while the projectors is not cooled down can result in serious burns.

DUKANE_I-PRO-8762_projector_prepare_Dukane_456-8762_lamp

Place the Dukane I-PRO 8762 projector on a soft cloth and turn it over to access the lamp cover on the bottom.

DUKANE_I-PRO-8762_projector_remove_Dukane_456-8762_lampLoosen the screw holding the projector lamp cover in place. Click the cover to remove the cover.

DUKANE_I-PRO-8762_replace_projector_remove_Dukane_456-8762_lampRemove the two screws holding the Dukane 456-8762 projector lamp in place. Using the indents, grab the sides of the Dukane 456-8762 projector lamp to  remove the old lamp. Be careful not to bhttp://www.lamprecycle.organg the lamp against the projector as this may case the bulb to break.

NOTE: The Dukane 456-8762 contains mercury and should be properly recycled.

Dukane_456-8762_lamp

Insert a new Dukane 456-8762 projector lamp into the Dukane I-PRO 8762 projector by pressing the part labeled “PUSH” until the  housing is plugged into the projector.

Tighten the two screws on the lamp. Replace the lamp cover and tighten its screw. screws. Reset the lamp timer by pressing the HELP button on the remote control for 10 seconds to reset it back to zero

Tips for a longer lamp life:

  • Turning on the Eco Mode to lower power consumption and extend the lamp life by 130%.
  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Dukane I-PRO 8762 and let it stand for at least one hour ever 24 hours.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Top tips for extending DLP projector lamp life.

6 good reasons to avoid counterfeit lamps:

  1. inferior workmanship which translates to an inferior product,
  2. they don’t last as long and are prone to explosiong
  3. improperly calibrated so can seriously damage the optics in your Dukane I-PRO 8762
  4. present a health hazard due to their toxic materials.
  5. installing a generic lamp will void the warranty
  6. short cuts with manufacturing means no safeguards to protect your eyesight!

Tagged with: , ,
Join the discussion on Facebook! All your questions, answered! The Screen & Projector Group