We're now Screen and Projector! For updated content, visit ScreenAndProjector.com and follow @screenandproj on social media!
Home › About Us › Page 80

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_EMP_835p_projectorHere’s how to replace the Epson EMP-835p projector lamp in 3 easy steps.

With their bargain prices and easy availability counterfeit lamps can be a real temptation. Be sure to invest in a genuine Epson EMP-835p projector lamp

Step 1: Buying the right lamp

Counterfeit lamps end up costing you more due to their inferior workmanship. With their bargain prices and easy availability, generic lamps can be a real temptation. But they will end up costing you more due to their inferior workmanship. Be sure to buy an authenticEpson EMP-835p projector lamp in order to keep your projector working properly.

So-called “generic, compatible” lamps can’t be calibrated properly, these knock-off lamps can seriously damage the optics in your Epson EMP-835p. They actually have a much shorter lamp life.

Even more disturbing is the health hazard they pose. Copy cat manufacturers don’t have the resources to buy the proper materials so they resort to using substitutes such as the carcinogenic Krypton-85, a chemical linked to cancer.

Avoid all these problems PLUS keep the warranty on your Epson EMP-835p projector valid. Look for the seal of approval and buy authentic. Learn the 7 Ways to Spot a Counterfeit Lamp.

Step 2: When to replace

The Brightness Control setting on your Epson EMP-835p will determine the lamp life. A high brightness setting will give you up to 2000 hours while a low brightness will give you 3000 hours. Look for the number of hours used on the INFO menu. Watch for any of the warning signs that the indicate the Epson ELPLP31 lamp is reaching end of life:

  • Dark image.
  • Image that has deteriorated.
  • Color in image that appears off.
  • “Replace the lamp” warning flashing on screen.
  • Lamp light flashing a steady orange.

NOTE: If the Lamp light turns red the Epson ELPLP31 lamp is burnt out and should be replaced immediately.

Step 3: Install the Epson ELPLP31

Before installation of the new Epson EMP-835p projector lamp follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson EMP-835p.
  • Allow the Epson EMP-835p projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_Epson EMP-835p_Epson_ELPLP31_lamp_loosen_cover

 

  • The lamp cover is found on top of the Epson Epson EMP-835p projector.
  • Loosen the lamp cover screw — you can’t remove it only loosen it.

 

 

 

Epson_EMP-835p_Epson_ELPLP31_Remove_lamp_cover

  • Slide the Epson EMP-835p projector lamp cover off

Epson_EMP-835p_Epson_ELPLP31_remove_lamp_from projectir

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

You are now ready to reset the lamp timer.

Resetting the Epson EMP-835p Lamp Timer

The Epson EMP-835 has a lamp timer that tracks the number of hours left for the Epson ELPLP31. Every time you install a new Epson ELPLP31 lamp you must reset the lamp timer to zero. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson EMP-835p projector.

Epson_EMP-835p_Epson_ELPLP31_lamp

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

Epson_EMP-835p_Epson_ELPLP31_lamp_second_reset_screen

 

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

Tips for longer lamp life

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson EMP-835p projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life
Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_ELPLP_22_projeector_lampYour Epson ELPLP22 lamp will last up to 3000 hours based on the projector settings.

Find out which projectors are compatible with the Epson ELPLP22 lamp.Before you install any lamp look for the seal of approval to know your are buying from an authentic manufacturer.

6 reasons to buy authentic and avoid generics

Protect yourself from buying counterfeit lamps.

Compatible projectors with the Epson ELPLP22 lamp

The Epson ELPLP22 lamp is compatible with the following Epson projectors:

Epson PowerLite 7800, Epson EMP-7800P, Epson PowerLite 7800p, Epson EMP-7850p, Epson PowerLite 7850p, Epson PowerLite 7850pNL, Epson EMP-7900, Epson EMP-7900NL, Epson EMP-7900p, Epson PowerLite 7900NL, Epson PowerLite 7900p, Epson EMP-7950, Epson EMP-7950NL, Epson PowerLite 7950, Epson PowerLite 900, Epson PowerLite 910W, Epson V11H120020, Epson V11H170920

For step-by-step instructions on replacing your Epson ELPLP22 lamp, click on your projector listed below:

 

Epson_EMP_7900p_Epson_ELPLP_22

 

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson EMP-7900 projector.

 

 

 

Epson_Powerlite_7900NL_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson EMP-7900NL projector lamp for the Epson EMP-7900NL projector.

 

 

 

epson-emp-7900_projector

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson EMP-7900p projector.

 

 

 

 

Epson_Powerlite_7900NL_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7900NL projector.

 

 

 

 

 

Epson_Powerlite_7900p_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7900p projector.

 

 

 

Epson_EMP_7950_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson EMP-7950 projector.

How to extend the life of the Epson ELPLP22 lamp:

Extend the life of the newly installed Epson ELPLP22 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson projectors and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low or Econo Mode to extend lamp life.
  • Learn more with Top tips for extending DLP projector lamp life.

 

Tagged with: , , , , , , , , , , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

epson-powerlite-830p_projector

Replacing the lamp in your Epson EMP-830p projector takes less than 15 minutes when you use our guide.

Be sure to invest in an authentic Epson EMP-830p projector lamp.

When to replace

As the Epson EMP-830p projector lamp reaches its end of life you’ll start to notice warning signs:

  • Dark image
  • Image that has deteriorated
  • A message saying “Replace the lamp” appears on screen.
  • Lamp light flashes orange

NOTE: If the Lamp light turns red the Epson EMP-830p projector lamp lamp is burnt out and should be replaced immediately.

See how many hours you have left in the Epson EMP-830p projector lamp:

  • Press the MENU button and highlight INFO menu to see the lamp usage hours.
  • When the Brightness Contol is set to High, the Epson ELPLP31 lamp will last up to 2000 hours.
  • Lower the Brightness Control to low and the Epson ELPLP31 lamp will last up to 3000 hours.

Find the right lamp

Be sure install a genuine Epson EMP-830p projector lamp and you’ll save yourself a lot of headaches. Look for the seal of approval before purchasing your replacement Epson EMP-830p projector lamp.

6 good reasons to buy authentic lamps

Avoid being duped: Read the 7 Ways to Spot a Counterfeit Lamp.

Install the Epson ELPLP31

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson EMP-830p.
  • Allow the Epson EMP-830p projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_EMP_ 830p_Epson_ELPLP31_lamp_remove_lamp_cover_screw

 

  • The lamp cover is found on top of the Epson EMP-830 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

 

  • Epson_EMP-830p_Epson_ELPLP31_lamp_remove_coverSlide the Epson EMP-830p projector lamp cover off.

 

Epson_EMP-830_Epson_ELPLP31_lamp_loosen_lamp_screws

 

 

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

 

  • Epson_PowerLite 830P_Epson_ELPLP31_lamp_remove_coverGently insert the new Epson ELPLP31 lamp into the Epson EMP-830p projector.
  • Tighten the screws on the Epson ELPLP31 lamp. Be sure not to tighten too much or the lamp may not work.
  • Replace the lamp cover and tighten the screw on the Epson ELPLP31 projector lamp cover.

You are now ready to reset the lamp timer.

Reseting the Epson EMP-830p Lamp Timer

The Epson EMP-830p has a lamp timer that tracks the number of hours left for the Epson ELPLP31 before it reaches end of life. Every time you install a new Epson ELPLP31 lamp you must reset the lamp timer to zero. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson EMP-830p projector.

 

Epson_EMP-830p_Epson_ELPLP31_lamp_reset_lamp_timer

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

 

Epson_EMP-830p_Epson_ELPLP31_lamp

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

Longer lamp life

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson EMP-830p projector projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_PowerLite_835_projector

Follow this guide to replace the Epson EMP-830p projector lamp

Be sure to buy an authentic Epson EMP-830p projector lamp from a recognized dealer and replacing will be easy. Follow this handy guide.

Step 1: Be prepared with the right lamp

With their bargain prices and easy availability, generic lamps can be a real temptation. However, generic lamps are plagued with problems that may them a poor choice despite the great price tag. The main reason to avoid these so-called compataible, generic lamps include:

Don’t be fooled by the generic manufacturers. Learn the 7 Ways to Spot a Counterfeit Lamp and look for the seal of approval.

Step 2:  When to replace

Your Epson EMP-830p projector lamp will last between 2000 to 3000 hours depending on the Brightness Control settings. A high setting will give you much less time (2000 hours or less) than a low brightness setting (3000 hours). Find out how many hours the Epson ELPLP31 lamp has been in use by pressing the MENU button and highlighting the INFO menu.

Look for these replacement warning signs on your Warning signs for lamp replacement in the Epson PowerLite 835p projector:

  • Dark image.
  • Image that has deteriorated.
  • Color in image that appears off.
  • “Replace the lamp” warning flashing on screen.
  • Lamp light flashing a steady orange.

NOTE: If the Lamp light turns red the Epson ELPLP31 lamp is burnt out and should be replaced immediately.

Step 3: Install the Epson ELPLP31

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson PowerLite 835p.
  • Allow the Epson PowerLite 835p projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_PowerLite 835P_Epson_ELPLP31_lamp_loosen_cover

 

  • The lamp cover is found on top of the Epson PowerLite 835p projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Epson_PowerLite 835P_Epson_ELPLP31_Remove_lamp_cover

  • Slide the Epson PowerLite 835p projector lamp cover off.

Epson_PowerLite 835P_Epson_ELPLP31_remove_lamp_from projectir

 

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

  • Gently insert the new Epson ELPLP31 lamp into the Epson PowerLite 835p projector.
  • Tighten the screws on the Epson ELPLP31 lamp. Be sure not to tighten too much or the lamp may not work.
  • Replace the lamp cover and tighten the screw on the Epson ELPLP31 projector lamp cover.

You are now ready to reset the lamp timer.

Resetting the Epson Powerlite 835p Lamp Timer

The Epson PowerLite 835p has a lamp timer that automatically tracks the number of hours left for the Epson ELPLP31 to let you know when it’s time for a replacement lamp. So, every time you change the Epson ELPLP31 lamp you need to reset the lamp replacement timer.

 

Epson_PowerLite 835P_Epson_ELPLP31_lamp

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

Epson_PowerLite 835P_Epson_ELPLP31_lamp_second_reset_screen

 

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

 

Make the Epson ELPLP31 last longer

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite 835p projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

 

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

epson-powerlite-830p_projector

Follow our step-by-step guide to replace the Epson PowerLite 830 projector lamp.

Be sure to invest in an authentic Epson PowerLite 830 projector lamp before proceeding.

Replacement warnings signs:

Warning signs that the Epson PowerLite 830 projector lamp needs to be replaced include:

  • Dark image
  • Image that has deteriorated
  • “Replace the lamp” warning appears on screen.
  • Lamp light flashes orange
  • NOTE: If the Lamp light turns red the Epson ELPLP31 lamp is burnt out and should be replaced immediately.

Press the MENU button and highlight INFO menu to see the lamp usage hours. When the Brightness Contol is set to High, the Epson ELPLP31 lamp will last up to 2000 hours. Lower the Brightness Control to low and the Epson ELPLP31 lamp will last up to 3000 hours.

Go with authentic

It’s critical to install a genuine Epson ELPLP31 rather than a compatible generic lamps. Generic lamps look appealing because of their low cost but have several major flaws:

Look for the seal of approval before purchasing your Epson ELPLP31.Read more about the 7 Ways to Spot a Counterfeit Lamp.

Install the new Epson ELPLP31

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson PowerLite 830.
  • Allow the Epson PowerLite 830 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_PowerLite 830_Epson_ELPLP31_lamp_remove_lamp_cover_screw

  • The lamp cover is found on top of the Epson PowerLite 830 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

 

Epson_PowerLite 830_Epson_ELPLP31_lamp_remove_cover

  • Slide the Epson PowerLite 830 projector lamp cover off.

Epson_PowerLite 830_Epson_ELPLP31_lamp_loosen_lamp_screws

 

 

Epson_PowerLite 830_Epson_ELPLP31_lamp_remove_lamp

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

  • Epson_PowerLite 830_Epson_ELPLP31_lamp_remove_coverGently insert the new Epson ELPLP31 lamp into the Epson PowerLite 830 projector.
  • Tighten the screws on the Epson ELPLP31 lamp. Be sure not to tighten too much or the lamp may not work.
  • Replace the lamp cover and tighten the screw on the Epson ELPLP31 projector lamp cover.

You are now ready to reset the lamp timer.

Reseting the Epson Powerlite 830 Lamp Timer

It’s important to reset the lamp time in the Epson PowerLite 830p so it can track the number of hours the Epson ELPLP31 has been in use. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson PowerLite 830 projector.

 

Epson_PowerLite 830_Epson_ELPLP31_lamp_reset_lamp_timer

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

Epson_PowerLite 830_Epson_ELPLP31_lamp

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

Make the Epson ELPLP31 lamp last longer

Extend the life of the newly installed Epson ELPLP31 lamp with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson PowerLite 830 projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Follow our guide to install at new Epson V11H146020 projector lamp.

Epson_PowerLite 830P_Epson_ELPLP31_lamp

Be sure to invest in an authentic Epson V11H146020 projector lamp before you proceed.

How long will the current lamp last?

Press the MENU button and highlight INFO menu to see the lamp usage hours. When the Brightness Contol is set to High, the Epson V11H146020 projector lamp will last up to 2000 hours. Lower the Brightness Control to low and the Epson V11H146020 projector lamp will last up to 3000 hours.

Replacement warnings signs

When it’s time to install a new Epson V11H146020 projector lamp you’ll notice that the image may become dark or the colours will start to deteriorate. The lamp light on the Epson V11H146020 projector will start flashing orange and a message “Replace the lamp” will start flashing on screen. NOTE: If the Lamp light turns red the Epson V11H146020 projector lamp is burnt out and should be replaced immediately.

Buy the right lamp

It’s critical to install a genuine Epson V11H146020 projector lamp rather than a compatible generic lamps. Generic lamps look appealing because of their low cost but this should be your first indication that the lamp you are about to purchase is counterfeit. These lamps present a lot of problems and are simply not worth buying in the long run. Look for the seal of approval before purchasing your Epson ELPLP31.

Reasons to avoid generic lamps

Read more about the 7 Ways to Spot a Counterfeit Lamp.

Install the Epson ELPLP31

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson V11H146020.
  • Allow the Epson V11H146020 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

 

Epson_V11H146020_Epson_ELPLP31_lamp_remove_lamp_cover_screw

  • The lamp cover is found on top of the Epson V11H146020 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Epson_V11H146020_Epson_ELPLP31_lamp_remove_cover

 

 

  • Slide the Epson V11H146020 projector lamp cover off.

 

 

Epson_V11H146020_Epson_ELPLP31_lamp_loosen_lamp_screws

 

 

Epson_V11H146020_Epson_ELPLP31_lamp_remove_lamp

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

 

Epson_V11H146020_Epson_ELPLP31_lamp_remove_cover

  • Gently insert the new Epson ELPLP31 lamp into the Epson V11H146020 projector.
  • Tighten the screws on the Epson ELPLP31 lamp. Be sure not to tighten too much or the lamp may not work.
  • Replace the lamp cover and tighten the screw on the Epson ELPLP31 projector lamp cover.

You are now ready to reset the lamp timer.

Reseting the Epson V11H146020 Lamp Timer

The Epson V11H146020 has a lamp timer that tracks the number of hours left for the Epson ELPLP31 before it reaches end of life. Every time you install a new Epson ELPLP31 lamp you must reset the lamp timer to zero. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson V11H146020 projector.

 

Epson_V11H146020_Epson_ELPLP31_lamp_reset_lamp_timer

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

Epson_V11H146020_Epson_ELPLP31_lamp_confirm_lamp_reset

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

 

 

Make the Epson ELPLP31 last longer

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson V11H146020 projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_ELPLP_22_projector_lampWhich projectors are compatible with the Epson ELPLP22 lamp.

Your Epson ELPLP22 lamp will last up to 3000 hours based on the projector settings. Look for the seal of approval when you buy from an authentic manufacturer.

6 reasons to buy authentic and avoid generics

Protect yourself from buying counterfeit lamps.

Compatible projectors with the Epson ELPLP 25 lamp

The Epson ELPLP22 lamp is compatible with the following Epson projectors:

Epson PowerLite 7800, Epson EMP-7800P, Epson PowerLite 7800p, Epson EMP-7850p, Epson PowerLite 7850p, Epson PowerLite 7850pNL, Epson EMP-7900, Epson EMP-7900NL, Epson EMP-7900p, Epson PowerLite 7900NL, Epson PowerLite 7900p, Epson EMP-7950, Epson EMP-7950NL, Epson PowerLite 7950, Epson PowerLite 900, Epson PowerLite 910W, Epson V11H120020, Epson V11H170920

For step-by-step instructions on replacing your Epson ELPLP22 lamp, click on your projector listed below:

 

Epson_Powerlite_7800p_Epson_ELPLP_22

 

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7800 projector.

 

 

Epson_Powerlite_7800p_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson EMP-7800P projector.

 

 

Epson_EMP7800P_projector_Epson_ELPLP22_lamp

 

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7800p projector.

 

 

Epson_EMP_7850p_Epson_ELPLP_22

 

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson EMP-7850p projector.

 

 

 

Epson_Powerlite_7850p_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7850p projector.

 

 

Epson_PowerLite_7850NL_Epson_ELPLP_22

Click here for step-by-step instructions on how to change the Epson ELPLP22 projector lamp for the Epson PowerLite 7850pNL projector.

 

 

 

How to extend the life of the Epson ELPLP22 lamp:

Extend the life of the newly installed Epson ELPLP22 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson projectors and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low or Econo Mode to extend lamp life.
  • Learn more with Top tips for extending DLP projector lamp life.

 

Tagged with: , , , , , , , , , , , , , , , , , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_PowerLite 830P_Epson_ELPLP31_lamp

There’s no need to call a repair man to install a new Epson EMP-830 projector lamp. Just follow our hassle-free guide!

Start off by knowing when to replace the Epson EMP-830 projector lamp and investing in an authentic Epson EMP-830 projector lamp.

Replacement warnings signs:

Warning signs for lamp replacement on the Epson EMP-830 projector:

  • Dark image
  • Image that has deteriorated
  • A message saying “Replace the lamp”  appears on screen.
  • Lamp light flashes orange
  • NOTE: If the Lamp light turns red the Epson ELPLP31 lamp is burnt out and should be replaced immediately.

How many hours are left in the Epson ELPLP31 lamp:

  • Press the MENU button and highlight INFO menu to see the lamp usage hours.
  • When the Brightness Contol is set to High, the Epson ELPLP31 lamp will last up to 2000 hours.
  • Lower the Brightness Control to low and the Epson ELPLP31 lamp will last up to 3000 hours.

Find the right lamp

Be sure install a genuine Epson ELPLP31 and you’ll save yourself a lot of headaches. Look for the seal of approval before purchasing your Epson ELPLP31.

6 good reasons to avoid generic lamps

Read more about the 7 Ways to Spot a Counterfeit Lamp.

Install the Epson EMP-830 projector lamp

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson EMP-830.
  • Allow the Epson EMP-830 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_EMP_ 830_Epson_ELPLP31_lamp_remove_lamp_cover_screw

The lamp cover is found on top of the Epson EMP-830 projector. Loosen the lamp cover screw — you can’t remove it only loosen it. Slide the Epson EMP-830 projector lamp cover off.

 

Epson_EMP-830_Epson_ELPLP31_lamp_loosen_lamp_screws

 

Loosen the two screws holding the Epson ELPLP31 lamp in place.

 

 

Epson_EMP-830_Epson_ELPLP31_lamp_remove_lampGrab the Epson ELPLP31 by the side indents and gently pull the lamp out. Take care not to bang the bulb as this may cause it to shatter. Learn what to do should when the lamp breaks inside the projector.

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!
Epson_PowerLite 830P_Epson_ELPLP31_lamp_remove_coverGently insert the new Epson ELPLP31 lamp into the Epson EMP-830 projector.

Tighten the screws on the Epson ELPLP31 lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the Epson ELPLP31 projector lamp cover.

You are now ready to reset the lamp timer.

Reseting the Epson EMP-830 Lamp Timer

The Epson EMP-830 has a lamp timer that tracks the number of hours left for the Epson ELPLP31 before it reaches end of life. Every time you install a new Epson ELPLP31 lamp you must reset the lamp timer to zero. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson EMP-830 projector.

 

Epson_EMP-830_Epson_ELPLP31_lamp_reset_lamp_timer

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

 

 

Epson_EMP-830_Epson_ELPLP31_lamp

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

 

Make the Epson ELPLP31 last longer

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson EMP-830 projector projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_EMP-835_projectorHere’s how to replace Epson EMP-835 projector lamp in 3 easy steps.

Start off by investing in an authentic Epson EMP-835 projector lamp.

Step 1: Buying the right lamp

With their bargain prices and easy availability, counterfeit lamps can be a real temptation. But they will end up costing you more due to their inferior workmanship.

So-called “compatible” lamps can’t be calibrated properly, these knock-off lamps can seriously damage the optics in your Epson EMP-835. They actually have a much shorter lamp life.

Even more disturbing is the health hazard they pose. Copy cat manufacturers don’t have the resources to buy the proper materials so they resort to using substitutes such as the carcinogenic Krypton-85, a chemical linked to cancer.

Avoid all these problems PLUS keep the warranty on your Epson EMP-835 projector valid. Look for the seal of approval and buy authentic. Learn the 7 Ways to Spot a Counterfeit Lamp.

Step 2: When to replace

The Brightness Control setting determine the Epson EMP-835 projector lamp life. A high brightness setting will give you up to 2000 hours while a low brightness will give you 3000 hours. Look for the number of hours used on the INFO menu. Watch for any of the warning signs that the indicate the Epson ELPLP31 lamp is reaching end of life:

  • Dark image.
  • Image that has deteriorated.
  • Color in image that appears off.
  • “Replace the lamp” warning flashing on screen.
  • Lamp light flashing a steady orange.

NOTE: If the Lamp light turns red the Epson ELPLP31 lamp is burnt out and should be replaced immediately.

Step 3: Install the Epson ELPLP31

Before installation follow these important safety tips:

  • Turn power button off wait for light to stop flashing.
  • Unplug the power cord on the Epson EMP-835.
  • Allow the Epson EMP-835 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_Epson EMP-835_Epson_ELPLP31_lamp_loosen_cover

 

  • The lamp cover is found on top of the Epson Epson EMP-835 projector.
  • Loosen the lamp cover screw — you can’t remove it only loosen it.

 

Epson_EMP-835_Epson_ELPLP31_Remove_lamp_cover

  • Slide the Epson EMP-835 projector lamp cover off.

 

NOTE: The Epson ELPLP31 lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

You are now ready to reset the lamp timer.

Resetting the Epson EMP-835 Lamp Timer

The Epson EMP-835 has a lamp timer that tracks the number of hours left for the Epson ELPLP31. Every time you install a new Epson ELPLP31 lamp you must reset the lamp timer to zero. Don’t use the Epson ELPLP31 lamp beyond its recommended usage as this can damages the Epson EMP-835 projector.

Epson_EMP-835_Epson_ELPLP31_lamp

  • Press the MENU button on either the remote control or on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter
  • Select LAMP-HOURS RESET.
  • Press ENTER to open the prompt screen

Epson_EMP-835_Epson_ELPLP31_lamp_second_reset_screen

  • Press Yes.
  • Lamp hours will be reset to zero.
  • Press MENU to return to the screen.

Make the Epson ELPLP31 lamp last longer

Extend the life of the newly installed Epson ELPLP31 with the following tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson EMP-835  projector projector and let it stand for at least one hour ever 24 hours.
  • An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Set the Brightness Mode to low.
  • Learn more with Top tips for extending DLP projector lamp life
Tagged with: , ,

by avatarShelagh McNallyPosted on Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Epson_PowerLite_750c_projector_lampReplace the Epson PowerLite 750c projector lamp in three quick steps.

Save yourself unnecessary headaches and keep your warranty intact by investing in an authentic Epson PowerLite 750c projector lamp.

Step 1: Be prepared, buy the right lamp

There is no shortage Epson PowerLite 750c projector lamps to buy. The challenging part is finding an authentic merchant you can trust. The Internet has been flooded with copycat manufacturers who create these knock off lamps using  toxic materials such Krypton-85. Counterfeit manufacturers advertise these projector lamps as “generic” or compatible but research has proven copycat lamps can damage the sensitive electronics in your projectors. Without access to proper materials and the correct schematics, generics can’t be properly calibrated to work with your machine and have shorter lamp life than original lamps as well as being prone to explosions.

Look for the seal of approval and buy authentic Epson PowerLite 750c projector lamp from a recognized dealer. You’ll be getting a far superior product. Read more about the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 2: Know the end-of life signs

Epson_PowerLite 750c_Epson_ELPLP31_projector_lampYou can track the number of hours left in the Epson PowerLite 750c projector lamp on the Info menu found on the Main menu. The Epson PowerLite 750c projector lamp will last up to 2000 hours if the Brightness setting is on normal. Change the setting to low and the Epson PowerLite 750c projector lamp lamp will last up to 3000 hours. Watch for these signs as well to let you know the end of life is coming.

  • The lamp warning light on the projector starts flashing orange. If it turns red and stays red, replace the Epson ELPLP32 projector lamp immediately.
  • Imaged becomes dark, colours are off or appear to be deteriorating
  • A message saying “Replace the lamp” appears on screen.

Step 3: Installing the new Epson ELPLP32

Installation will take under 10 minutes. You’ll need to install a Epson ELPLP32 projector lamp. Be sure to follow these preparation steps:

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_unplug_power_cord

  • Turn power button off  and wait for the power light to stop flashing.
  • Unplug the power cord from the Epson Powerlite 750c projector.
  • The Epson Powerlite 750c should be cool to the touch before you try to change the Epson ELPLP32 lamp. This projector operate at a high temperatures so you can burn yourself  badly if you don’t allow for the cool down period.
  • Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_remove_cover

  • Turn the Epson PowerLite 750c over and placing on a soft, scratch free surface.
  • Press on the tabs located on top of the Epson PowerLite 750c cover. Lift up the lamp cover.

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_loosen screws

  • Using the screw driver provided with the Epson PowerLite 750c projector, loosen the two screws holding the Epson ELPLP32 lamp in place.

 

 

 

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_removalPressing on the indents on the sides of the Epson ELPLP32, pull the projector lamp gently up out of the Epson PowerLite 750c projector. Take care not to bang the actual lamp or it may break. Learn how to do a proper clean up if the lamp breaks or explodes.

NOTE: The Epson ELPLP32 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps and be good to the environment.
Epson_PowerLite 760c_Epson_ELPLP31_projector_lamp_replace_air_filter

  • Gently place the new Epson ELPLP32 lamp into the Epson PowerLite 750c making sure not to touch the actual bulb. The oil on your fingers will leave a burn mark on the lamp once it heats up and this can cause black out spots on the screen.
  • Tighten the screws on the new Epson ELPLP32 lamp.
  • Slide the air filter out and remove it immediately. Slide in the new filter that came with the Epson ELPLP32 lamp. Replace the lamp cover.
  • You are now ready to reset the lamp timer.

Reset the lamp timer in the Epson PowerLite 750c

Your Epson PowerLite 750c has a built-in timer to track the life of the Epson ELPLP32 projector lamp. So, it’s very important that you reset the lamp timer every time you replace the Epson ELPLP32 projector lamp. Here’s how:

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_reset_lamp_timer

 

  • Press the MENU button on either the remote control on the projector’s control panel.
  • Scroll down to the RESET option.
  • Press Enter. The RESET ALL screen will appear.
  • Scroll down to LAMP-HOURS RESET.
  • Press ENTER to open up the confirmation screen

 

Epson_PowerLite 750c_Epson_ELPLP31_projector_lamp_reset_lamp_confirmation_screen

 

  • Highlight YES.
  • Press ENTER.
  • Press ESC or MENU to exit this option.

 

Congratulations! You’ve just installed at new Epson ELPLP32 projector lamp in your Epson PowerLite 750c. Here are some tips to extend the life of your Epson ELPLP32 lamp:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson Powerlite 750c projector projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

 

Tagged with: , , , ,
Join the discussion on Facebook! All your questions, answered! The Screen & Projector Group