Category: FixYourDLP

anatomy_lamp_labelsAt your fingertips

Here’s the central location for the latest DIY guides, tips, news and troubleshooting solutions for everything to do with DLP technology, RPTV and projectors. Check back regularly to see what’s been added.

 

Change the NEC NP-PE401H projector lamp

We have you covered when it’s time to change the NEC NP-PE401H projector lamp. You can expect up to 2500 hours of lamp use (33pp in Eco-Mode) with your NEC NP-PE401H projector lamp. When the lamp is reaching end of life

Tagged with: , , ,

Understanding projector resolution

Shopping for a projector? Understanding resolution is key. Resolution refers to the number of lines displayed on the screen. The higher the resolution, the crisper the quality of the picture. Most projectors come with a fixed resolution that is completely

Tagged with:

Clean the Epson EMP-7500 air filter

 Clean the Epson EMP-7500 air filter This guide shows how to clean or replace the Epson EMP-5500 air filter.  When to replace Clean the air filter at the bottom of the Epson EMP-7500 projector after every 100 hours of use.

Tagged with: ,

Install a new Epson EMP-7500 projector lamp

 Install a new Epson EMP-7500 projector lamp This guide shows how to replace the Epson EMP-7500 projector lamp.  When to replace The Epson EMP-7500 projector lamp has an expected life of 200 hours. When it’s time to replace the lamp look

Tagged with: , ,

Cleaning the Epson EMP-5500 air filter

Clean the Epson EMP-5500 air filter This guide shows how to clean or replace the Epson EMP-5500 air filter.  When to replace Clean the air filter at the bottom of the projector after every 100 hours of use. If it

Tagged with: ,

Replace the Epson EMP-5500 projector lamp

Install a new Epson EMP-5500 projector lamp This guide shows how to replace the Epson EMP-5500 projector lamp.  When to replace The Epson EMP-5500 projector lamp has an expected life of 200 hours. When it’s time to replace the lamp look

Installing a replacement Sanyo PLC-XT15A projector lamp

Replacing the Sanyo PLC-XT15A projector lamp  The lifespan of your Sanyo PLC-XT16 projector lamp lamp varies depending on how much the projector is used and if the filters are cleaned regularly. When it’s time to replace the lamp, the LAMP REPLACE indicator will flash

Tagged with: , ,

Installing a replacement Sanyo PLC-XT10A projector lamp

Replacing the Sanyo PLC-XT10A projector lamp The lifespan of your Sanyo PLC-XT16 projector lamp lamp varies depending on how much the projector is used and if the filters are cleaned regularly. When it’s time to replace the lamp, the LAMP REPLACE indicator

Tagged with: , ,

Replacing the ProjectionDesign Action Model Five projector lamp

Replacement ProjectionDesign Action Model Five projector lamp Your ProjectionDesign Action Model Five projector uses the ProjectionDesign 400-0003-00 Projector Lamp. Be sure to buy your ProjectionDesign Action Model 1 projector lamp from an authorized dealer to keep your projector working properly.

Tagged with: , ,

Replacing the ASK Proxima C160 projector lamp

How to install a new ASK Proxima C160 projector lamp When the LED light is blinking red it’s time to replace the ASK Proxima C160 projector lamp. You may also see a “Replace Lamp” message on the screen. Don’t wait to replace

Tagged with: , ,
Top