Search found 8 matches

by toketo
Sun Sep 11, 2011 3:14 am
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

such, I return with good notice, I fix my Samsung HLR4667w, fix my DMD with ic mentioning later. Now the question is, as we calibrate the image is larger than the screen. ? and try loosening the 3 screws that DMD but adjust the alignment,
by toketo
Mon Jul 11, 2011 7:13 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

On DMD board, the IC is a8904slb, here in Argentina is quite difficult to achieve. I have to buy it online. sell it on ebay but do not shipping to Argentina.
by toketo
Sat Jul 09, 2011 5:58 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

after much searching, I found the service manual, and the problem is in the dmd, not on the ball or the lamp to my dismay, but to disarm the dmd in search of some hope, I see the intergrade ic702 is burned, I look datasheet and that controls the color wheel, so here now to search the ic.!
by toketo
Thu Jul 07, 2011 3:51 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

hi, will not turn on the TV image, the lamp does not start, if you type the beginning sound of melody, but the light is flashing lamp and then put into shutdown.
by toketo
Thu Jul 07, 2011 3:01 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

hello, me again, yesterday I got the new color wheel, install it, but turn on the TV, only lamp light blinks, and then shutdown. but how good it could be rekindled as I did before. have an idea that can be? I am in Argentina and I'm using here are 220v transformer 110 with me I'll be running short o...
by toketo
Mon Jun 13, 2011 7:41 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

Thanks for your help, I'm looking online, I'm from Argentina and do not all international shipments. I have no part number, only on TV model. know where I can get the manual to set me the part number? thanks.
by toketo
Mon Jun 13, 2011 4:37 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

Re: problem with hlr4667w wax/xaa

hi mrgreen, which broke was the color wheel, is broken into 2 panels of color, now my question is, if I take the color wheel, the lamp should turn? I remove the wheel, but still with the same problem when I turn on, the lamp light blinking and 15 seconds later put back on standby, immediately lamp b...
by toketo
Mon Jun 13, 2011 2:50 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: problem with hlr4667w wax/xaa
Replies: 17
Views: 34650

problem with hlr4667w wax/xaa

Such, I have a hlr4667w wax / xaa and the problem is that it made a buzzing noise and then a broken glass, and the TV goes off. when I turn on the lamp light blinks but the few seconds it goes into standby mode again, and so on. If I change the color wheel this would be solved?? will be broken or so...

Go to advanced search