Search found 6 matches

by rbrophy52
Sun Feb 07, 2010 3:25 am
Forum: DLP, LCD Projection, and other RPTV
Topic: NEW Bulb- still not working
Replies: 14
Views: 14881

Re: NEW Bulb- still not working

Thanks so much for responding to my dilema. Yes the switch is taped as you suggested a few threads ago. I have purchased a second ballast just to try to eliminate that issue. I get the same response with no lamp lighting. Incidently, the output voltage to he lamp is a mere 7.86vdc as measured direct...
by rbrophy52
Fri Jan 29, 2010 10:03 pm
Forum: Samsung Discussion
Topic: New Lamp Doesn't Turn On? Try This!
Replies: 75
Views: 92501

Re: New Lamp Doesn't Turn On? Try This!

Good responses from both Eddie and Mike and thank you both. I have the little blue swith taped in the downward position and stll have nothing. I have ordered a new ballast although the current one has less than two hours on it. This due to having only 5.65vdc measured at the output to the lamp. I wi...
by rbrophy52
Thu Jan 28, 2010 4:14 pm
Forum: Samsung Discussion
Topic: New Lamp Doesn't Turn On? Try This!
Replies: 75
Views: 92501

Re: New Lamp Doesn't Turn On? Try This!

I would very much like to have Eddie weigh in on this. He has seen all the exchanges and most likely is familiar with the solution. I'm experiencing the same problem. But I can get it to work -- kind of. HLR6167w Color wheel was replaced, and then the new one started grinding. Replaced Color wheel (...
by rbrophy52
Wed Jan 27, 2010 2:26 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: NEW Bulb- still not working
Replies: 14
Views: 14881

Re: NEW Bulb- still not working

Can someone explain the "reset timer" as I have not heard of his yet. For six months now I have been trying to resolve my issue of: -Replace lamp -Replace color wheel -Replace ballast -Set worked for about 2 weeks then screen went black and lamp apparently does not illuminate. I even paid ...
by rbrophy52
Sat Jan 16, 2010 11:03 am
Forum: Samsung Discussion
Topic: New Lamp Doesn't Turn On? Try This!
Replies: 75
Views: 92501

Re: New Lamp Doesn't Turn On? Try This!

No I have not learned anything new about this. I have a difficult time thinking that at least one person on this forum has hasn't figured out the problem though. It just seems to be such a common occurance that someone should have figured it out by now. If you know of the location of a schematic, I ...
by rbrophy52
Wed Jan 13, 2010 3:11 am
Forum: Samsung Discussion
Topic: New Lamp Doesn't Turn On? Try This!
Replies: 75
Views: 92501

Re: New Lamp Doesn't Turn On? Try This!

It sounds as if this lamp out, ballast bad and color wheel shattering are all very common with these Samsungs. I am sufferin through the same woes. I have replaced everything and the unit worked fine for a couple weeks but now the lamp will not turn on. I do not get the clicking sound out of the bal...

Go to advanced search