Search found 135 matches

by Crowell
Tue Nov 30, 2010 11:13 pm
Forum: Samsung Discussion
Topic: Service Mode Not Working...
Replies: 1
Views: 3672

Re: Service Mode Not Working...

Just in case your doing it wrong have a look at my guide:
viewtopic.php?f=10&t=1050&start=0&hilit
As you can se there is more to it than just pushing Mute+1+8+2.
Good luck.
by Crowell
Tue Nov 30, 2010 11:09 pm
Forum: Samsung Discussion
Topic: Replaced lamp on 50 inch Samsung still turns off
Replies: 1
Views: 3810

Re: Replaced lamp on 50 inch Samsung still turns off

Have you cleaned the inside of your TV? Is it still filled with dust? If so then I would start there, you see many parts tend to overheat when there is a lot of dust. so when the sensors on the TV detect an excessive temperature reading, it will shut the TV off automatically (for safety reasons). Go...
by Crowell
Tue Nov 30, 2010 11:03 pm
Forum: Samsung Discussion
Topic: DLP buzzibg (humming)
Replies: 1
Views: 3821

Re: DLP buzzibg (humming)

That sounds like your speakers are starting to kick the bucket. The ballast is unaffected buy the remote since it’s the board that regulates power to the lamp.
Try increasing the volume on the tv, if the buzzing gets louder, then its definitely the speakers.
Good luck.
by Crowell
Tue Jul 27, 2010 2:24 pm
Forum: Samsung Discussion
Topic: Samsung DLP TV Class Action Settlement Notice!!!
Replies: 2
Views: 5969

Re: Samsung DLP TV Class Action Settlement Notice!!!

This is grate news! Now people can finally have their TV issue fixed free of charge. I hope every one spreads the news so Samsung TV owners that have the famous problem can get piece of mind.
by Crowell
Tue Jun 22, 2010 4:45 pm
Forum: Samsung Discussion
Topic: Samsung HLR5667WX Does NOT Turn ON
Replies: 6
Views: 9526

Re: Samsung HLR5667WX Does NOT Turn ON

I would suggest you try it, see if you qualify so Samsung repairs your TV, instead of trying on your own. Some times they exchange it for a new TV, or at least offer one with a grate discount, tell us how it all works out.
by Crowell
Tue Jun 22, 2010 4:19 pm
Forum: Samsung Discussion
Topic: Still tv won't turn on
Replies: 15
Views: 27888

Re: Still tv won't turn on

Since you have already replaced the lamp, have you cleaned the inside of your TV? This is to discard overheating as a probable cause. Another thing, have you closed the lamp door before turning it on? There is a blue switch that if not pressed buy the lamp door it will prevent the TV from turning ON...
by Crowell
Thu Jun 17, 2010 2:44 pm
Forum: Samsung Discussion
Topic: Samsung DLP HLN437WX/XAA-Lamp Question
Replies: 5
Views: 7949

Re: Samsung DLP HLN437WX/XAA-Lamp Question

Son now the TV won’t turn on again? Have you tried resetting the lamp timer? If not here is my old post with instructions. http://www.fixyourdlp.com/forum/viewtopic.php?f=10&t=1050 However if you are also experimenting problems with the picture (color, blurriness, flashing, distortions, etc) the...
by Crowell
Wed Jun 16, 2010 11:52 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: Okay. . . what now!!
Replies: 12
Views: 15320

Re: Okay. . . what now!!

If you get your TV back it would be recommendable to reset the lamp timer, so that the TV doesn’t shut down in the near future.It’s better to discard possible complication than to later deal with them unexpectedly.
by Crowell
Wed Jun 16, 2010 10:17 pm
Forum: Samsung Discussion
Topic: Samsung DLP HLN5065W color wheel?
Replies: 17
Views: 22553

Re: Samsung DLP HLN5065W color wheel?

Thanks Nightkid, I totally forgot about the stain. The picture on the link is the UV filter from a Samsung color wheel enclosure, it might not look exactly the same as the one on the post above, but I suggest you double check yours, if so your going to have to buy a new one, the bad news is that the...
by Crowell
Wed Jun 16, 2010 4:14 pm
Forum: Samsung Discussion
Topic: Still tv won't turn on
Replies: 15
Views: 27888

Re: Still tv won't turn on

Have you cleaned the inside of the TV? There is a small chance the problem is overheating. You mention there were no broken pieces on the chassis. But did you look at the color wheel? Here is a small reference guide on where to locate it. http://www.fixyourdlp.com/forum/viewtopic.php?f=4&t=1315 ...
by Crowell
Tue Jun 15, 2010 7:50 pm
Forum: Samsung Discussion
Topic: Samsung DLP HLN5065W color wheel?
Replies: 17
Views: 22553

Re: Samsung DLP HLN5065W color wheel?

What brand of lamp is inside your TV? Normally Philips last between 6000+ hours & OSRAM from 4000+ hours. So unless you have your TV on for lengthy periods your lamp should last you 2 years at least. If you have a generic brand then it’s probably time to change the lamp. When the picture on the ...
by Crowell
Mon Jun 14, 2010 11:13 pm
Forum: Mitsubishi Discussion
Topic: WD-52327 Error code 34...Sometimes TV turns on
Replies: 5
Views: 11078

Re: WD-52327 Error code 34...Sometimes TV turns on

My personal suggestion is that you replace the ballast (the entire board). Since the only way to test the ballast is with a oscilloscope, I really don’t see another alternative. Plus 50 or 60 bucks for a ballast doesn’t sound so bad (compared what those clowns at the repair show are trying to charge...
by Crowell
Mon Jun 14, 2010 9:57 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: Okay. . . what now!!
Replies: 12
Views: 15320

Re: Okay. . . what now!!

Ok, correct me if I’m wrong, but did you reset the lamp timer after you replaced the lamp? If not then try it, if yes… then did you clean the inside of the TV? I can safely assume that you did, since you have already changed a fan. Have you closed the lamp door? (There is a small switch that if not ...
by Crowell
Mon Jun 14, 2010 9:27 pm
Forum: LG/Zenith Discussion
Topic: Last attempt at getting some help from the board..
Replies: 5
Views: 10498

Re: Last attempt at getting some help from the board..

As far as my knowledge goes, there is only 3 parts that can prevent the TV from turning on. One is the lamp, another one is the ballast, and third is the color wheel. Since you already installed a new lamp, then it safe to say that it’s not the lamp, that leaves the color wheel & ballast. My sug...
by Crowell
Mon Jun 14, 2010 9:07 pm
Forum: Samsung Discussion
Topic: Still tv won't turn on
Replies: 15
Views: 27888

Re: Still tv won't turn on

Have you reset the lamp timer? Sorry for butting in, but Eddie hasten posted in quite a while now. You see the lamp timer is a small program built in your TV that keeps track of the amount of hours that the lamp is in use. When it reaches a certain limit it will shut the TV for security reasons. Her...
by Crowell
Wed Apr 28, 2010 9:02 pm
Forum: Samsung Discussion
Topic: HLS5679W won't turn on
Replies: 11
Views: 12455

Re: HLS5679W won't turn on

You probably didn’t read the above post but this tv has no color wheel or lamp. It uses LEDS, here is the tech specs.
http://reviews.cnet.com/projection-tvs/ ... 41984.html
by Crowell
Wed Feb 17, 2010 9:08 pm
Forum: LCD Televisions
Topic: DYNEX LCD37 HALF PICTURE (LEFT SIDE)
Replies: 5
Views: 14426

Re: DYNEX LCD37 HALF PICTURE (LEFT SIDE)

Ok, it is very common issue on these Dynex LCD TVs that the connector (especially the flat one) that goes from the Logic board to the LCD is loose, how ever you can try and clean it with clean cloth dipped in alcohol, just to make sure no rust is in there. If still nothing happens then my second rec...
by Crowell
Wed Feb 17, 2010 5:00 pm
Forum: Samsung Discussion
Topic: Samsung, comes on for a few minutes then shuts off
Replies: 3
Views: 5438

Re: Samsung, comes on for a few minutes then shuts off

Hmmmmm, whistling noises, there is a small probability it might be the color wheel that is not reaching its standard RPMs, either its baring is slightly out of place or there is something stuck inside. You might want to check it before buying anything else.
by Crowell
Wed Feb 17, 2010 12:58 am
Forum: Samsung Discussion
Topic: Bulb Replacement? Or something more?
Replies: 5
Views: 8789

Re: Bulb Replacement? Or something more?

Yup, that is a DMD board, the lamp produces white light of no light, I never heard of a lamp that creates black lines, a DMD board on the other hand, are known to produce black or white lines, and black or white dots, try and bring up the menu to see if those lines also affect the TV menu. If the me...
by Crowell
Wed Feb 17, 2010 12:28 am
Forum: Samsung Discussion
Topic: Samsung DLP HLN567WX/XAA Picture Distortions
Replies: 16
Views: 23625

Re: picture of problem

It sound more like it’s the digital board, there are two peculiar things. First one is that once the color goes all crazy the remote doesn’t work. And second after unplugging it turning back on the picture is ok for a few moments. Those are symptoms of a failing digital board; my suggestion is to ch...
by Crowell
Wed Feb 17, 2010 12:07 am
Forum: Samsung Discussion
Topic: Samsung, comes on for a few minutes then shuts off
Replies: 3
Views: 5438

Re: Samsung, comes on for a few minutes then shuts off

Have you reset the lamp timer after installing the new lamp? Do you hear any strange noises coming from the back of the tv? The lamp timer is a small program that is monitored by the DMD board, it keeps track of the lamp hours in use. Normally when its reaches a limit it will shut the tv off for sec...
by Crowell
Tue Feb 16, 2010 9:49 pm
Forum: Toshiba DLP Discussion
Topic: 62HM196 - Ballast Problem ????
Replies: 3
Views: 7096

Re: 62HM196 - Ballast Problem ????

I posted a small guide a few weeks ago, here is the link. http://www.fixyourdlp.com/forum/viewtopic.php?f=10&t=988&p=3538&hilit=can+air#p3538 Now I know that the post was about another TV but almost all of the TVs are serviced the same. You don’t need to take any component out of its pla...
by Crowell
Tue Feb 16, 2010 12:51 am
Forum: Samsung Discussion
Topic: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help
Replies: 8
Views: 9814

Re: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help

If you are very handy you could do it yourself, there are a number o guides online, but if you’re not sure I suggest you buy the ballast separately and have a technician you trust install it. Another recommendation is partstore.com. Good luck.
by Crowell
Mon Feb 15, 2010 9:06 pm
Forum: Samsung Discussion
Topic: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help
Replies: 8
Views: 9814

Re: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help

I have bought my 2 bulbs for my Samsung 61” tv at http://www.discount-merchant.com/ last time I checked and they lower the price for 104.05, when I bought mine last year they where 119.99, and they sell original Philips. If you don’t want to hassle with the lamp installation I suggest you buy the la...
by Crowell
Mon Feb 15, 2010 5:57 pm
Forum: Samsung Discussion
Topic: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help
Replies: 8
Views: 9814

Re: Samsung DLP TV 61' HLR6167 WAXX/XAA Please help

It sound like you bought a generic lamp, OSRAM might be the most decent generic lamp in the market, but generic is still generic my recommendation is to buy original Philips. Any way you might want to clean the inside of the tv (especially the fans) free of dust & mold, you see that tends to clo...
by Crowell
Mon Feb 15, 2010 5:12 pm
Forum: Samsung Discussion
Topic: HLP5663WX/XAA - Fan or Color Wheel Noise?
Replies: 7
Views: 11739

Re: HLP5663WX/XAA - Fan or Color Wheel Noise?

That sound that you hear, is it loud enough to hear it while you are watching the tv? Have you clean the inside free of dust & mold? Try to open the back again with the tv off and get to the color wheel, and start spinning it manually, see if you get that noise.
by Crowell
Mon Feb 15, 2010 5:00 pm
Forum: Toshiba DLP Discussion
Topic: 62HM196 - Ballast Problem ????
Replies: 3
Views: 7096

Re: 62HM196 - Ballast Problem ????

Hmmmmm, when the screen goes dark, do you hear any strange noises coming from the back of the TV? After it comes back do you have any problem with the picture? Have you cleaned the inside of your TV in the last 6 moths? My first assumption is the lamp, that’s about to go, if you replace it and same ...
by Crowell
Mon Feb 15, 2010 4:43 pm
Forum: Mitsubishi Discussion
Topic: Wd52525 Lamp Replaced and Lamp Won't Power
Replies: 3
Views: 6023

Re: Wd52525 Lamp Replaced and Lamp Won't Power

That sounds like you haven’t reset the lamp timer. One you get it to turn on, bring up the tv menu and look for lamp timer, then reset it back to 0 hrs. Let us know if that worked for you.
by Crowell
Mon Feb 15, 2010 4:25 pm
Forum: Samsung Discussion
Topic: please help with my samsung
Replies: 7
Views: 9385

Re: please help with my samsung

Well if it’s just a swollen capacitor you need to remove it and take it to a local electronics shop, and see if the have some spares you can buy. If you replace it and nothing happens then it might be a general board failure and you’ll have to buy a new one.
Good luck.
by Crowell
Mon Feb 15, 2010 4:06 pm
Forum: Samsung Discussion
Topic: HLT5076SX Power Cycles... Won't Stay On
Replies: 4
Views: 7004

Re: HLT5076SX Power Cycles... Won't Stay On

Ok, let’s start by troubleshooting your problem. Have you ever changed the lamp? Have you cleaned the inside of the tv in the last 6 moths? Is there anything wrong with the picture when it briefly comes up? Do you hear any strange noises coming from the back of the tv? From the looks of it I think i...
by Crowell
Thu Feb 11, 2010 4:36 pm
Forum: Samsung Discussion
Topic: please help with my samsung
Replies: 7
Views: 9385

Re: please help with my samsung

I think I know what the problem is. My first recommendation is to turn on the tv at night with no lights on, remove a side round panel (it’s a round service door with only a screw holding it.) and see if you can see a faint small dot of light in the middle of the screen. If there is one then its one...
by Crowell
Thu Feb 11, 2010 4:02 pm
Forum: DLP, LCD Projection, and other RPTV
Topic: Replacement bulb
Replies: 2
Views: 4888

Re: Replacement bulb

You see for the Samsung BP96-00823A there are two types of lamps. 1.- The big round, sealed lamp is called the E23. 2.- The small square front, with two ventilation holes called the E22. Now the place you purchased the lamp didn’t ask you which lamp you had in your enclosure. Now the way to fix this...
by Crowell
Thu Feb 11, 2010 1:09 am
Forum: Mitsubishi Discussion
Topic: WD62327 Lamp will not light
Replies: 9
Views: 13777

Re: WD62327 Lamp will not light

Here are some places you can shop around for the color wheel, (personal recommendation, I bought mine at: http://www.discount-merchant.com/ ). http://www.samsungparts.com/ Just remember to search by part number, not by model number, its normally printed on the color wheel connector cable. Good luck.
by Crowell
Thu Feb 11, 2010 12:49 am
Forum: RCA Discussion
Topic: RCA DLP 50"
Replies: 1
Views: 4633

Re: RCA DLP 50"

Ok, here come the questions. Before the TV went out. Did you have any problems with the picture? Have you cleaned the inside of the tv in the last 6 moths? I’m thinking that the soft whirring sound you hear is a color wheel that’s gone bad, that causes the tv to shut off, or a fan that is malfunctio...
by Crowell
Wed Feb 10, 2010 10:35 pm
Forum: RCA Discussion
Topic: RCA50"DLP, grey areas
Replies: 3
Views: 6497

Re: RCA50"DLP, grey areas

It sounds like you need to completely clean the back of you Tv free of mold & dust. Because it sound like you probably just moved dust around, thus still not solving you problem. Here are some instructions on the proper way to do it. Good luck. http://www.fixyourdlp.com/forum/viewtopic.php?f=10&...
by Crowell
Wed Feb 10, 2010 10:11 pm
Forum: Samsung Discussion
Topic: HL-s5065w won't turn on
Replies: 4
Views: 4137

Re: HL-s5065w won't turn on

Ok, here it goes, the TV you have is a DLP, it uses a lamp that produces a light slightly brighter than the sun. That lamp last about 4000 to 8000 hours depending on the brand (Philips is the best). Under normal usage that translates from 2 – 3 years, so normally when the lamp goes out, the DMD boar...
by Crowell
Wed Feb 10, 2010 9:27 pm
Forum: Samsung Discussion
Topic: Need help with 52"tv, color problems
Replies: 4
Views: 3769

Re: Need help with 52"tv, color problems

Then it’s definitely the digital video board. Check the board for any swollen capacitors, they may look like these. http://www.fixyourdlp.com/forum/viewtopic.php?f=12&t=1191&hilit=capacitors If you find any, replace them, if not then its probably a general failure of the board, and you’ll ha...
by Crowell
Wed Feb 10, 2010 8:50 pm
Forum: Samsung Discussion
Topic: 72" HL72A650C1F restarting
Replies: 5
Views: 5274

Re: 72" HL72A650C1F restarting

First recommendation, clean the inside of the tv completely free of dust & mold.
Second, if that doesn’t work replace the ballast, that constant clicking is symptom of bad ballast. Good luck.
by Crowell
Wed Feb 10, 2010 8:41 pm
Forum: Samsung Discussion
Topic: 72" HL72A650C1F restarting
Replies: 5
Views: 5274

Re: 73" DLP

Hmmmm, ok, here are some questions. Do you hear any strange noises coming from the back of the TV? Have you cleaned the inside of the TV in the last 6 moths? Did you have any distortion with the picture before the tv died. It sounds like a problems with either the color wheel or the digital board, b...
by Crowell
Wed Feb 10, 2010 5:58 pm
Forum: Samsung Discussion
Topic: DLP HLN5065W Image flickering then Shut Off
Replies: 4
Views: 7964

Re: DLP HLN5065W Image flickering then Shut Off

The prices are around 120 to 200 bucks. Try searching it by part number, not by model number; you see many models share the same type of board. Remember to look up the part number you have to physically take out the board. Good luck.
by Crowell
Wed Feb 10, 2010 5:42 pm
Forum: Samsung Discussion
Topic: Need help with 52"tv, color problems
Replies: 4
Views: 3769

Re: Need help with 52"tv, color problems

I don’t think it’s the color wheel; it sounds more like the digital board, normally the color wheel problems are from blobs of some color, or a screeching whining sound. In this case there are none, and only one color is affected. Try to bring up the tv menu, see if its also affected, if not we can ...
by Crowell
Wed Feb 10, 2010 5:21 pm
Forum: Samsung Discussion
Topic: HLT5076SA/XAA Keeps Shutting off!!!!
Replies: 3
Views: 5390

Re: HLT5076SA/XAA Keeps Shutting off!!!!

I also think you made the right decision, and you got a very sweet deal out of it. Hopefully it’s the ballast but just in case it doesn’t fix you problem you ma deen to replace your lamp, (some times when the ballast goes out, it takes the lamp with him).
by Crowell
Wed Feb 10, 2010 4:13 pm
Forum: Samsung Discussion
Topic: what now? (hlr5067w)
Replies: 8
Views: 9850

Re: what now? (hlr5067w)

Negative, it’s the DMD board. From the symptoms you describe and the parts you replaced, that’s got to be it. It can’t be the color wheel, because the purple & white lines are not symptoms produce when it’s defective. Those are from a DMD board and a digital board. You already replace the digita...
by Crowell
Tue Feb 09, 2010 9:04 pm
Forum: Mitsubishi Discussion
Topic: WD62327 Lamp will not light
Replies: 9
Views: 13777

Re: WD62327 Lamp will not light

Have you reset the lamp timer after you replaced the lamp? Also there is a possibility it might be the thermostat. Also check that the lamp door is completely closed.
by Crowell
Mon Feb 08, 2010 9:24 pm
Forum: Mitsubishi Discussion
Topic: WD62327 Lamp will not light
Replies: 9
Views: 13777

Re: WD62327 Lamp will not light

have you checked the digital video board and looked at the capacitors? Here is a video of where it is in a samsung tv to give you an idea. (1:19 min)
http://www.youtube.com/user/FixYourDLPc ... jr_9A5Xd2Q

And here are som examples of what to look for.
capa01.jpg
capa01.jpg (60.35 KiB) Viewed 13770 times

capa02.jpg
capa02.jpg (45.86 KiB) Viewed 13770 times
by Crowell
Mon Feb 08, 2010 9:07 pm
Forum: Samsung Discussion
Topic: HL-s5065w won't turn on
Replies: 4
Views: 4137

Re: HL-s5065w won't turn on

Have you ever replaced the lamp? If yes, how long ago? Also did you reset the lamp timer after you replaced the lamp?
by Crowell
Mon Feb 08, 2010 6:45 pm
Forum: Samsung Discussion
Topic: How to Clean DLP to prevent overheating?
Replies: 1
Views: 3246

Re: How to Clean DLP to prevent overheating?

Here is a link to one of my previous posts on one way to properly clean the inside of a tv (at least in my experience) viewtopic.php?f=10&t=988&p=3538&hilit=vacuum+cleaner#p3538
Hope this helps.
by Crowell
Mon Feb 08, 2010 6:35 pm
Forum: Samsung Discussion
Topic: DLP HLN5065W Image flickering then Shut Off
Replies: 4
Views: 7964

Re: DLP HLN5065W Image flickering then Shut Off

That sound like the digital video board. If you look at the back of your TV you’ll see the HDMI input, the computer monitor input, etc. that’s the board that’s going bad, first of all I recommend you take it out and look for any swollen capacitors, if any you’ll need to replace them, if not then a r...
by Crowell
Mon Feb 08, 2010 3:57 pm
Forum: Samsung Discussion
Topic: Cleaning the front of my DLP screen.
Replies: 1
Views: 3325

Re: Cleaning the front of my DLP screen.

Try using a microfiber screen cloth, and pray some Windex (but no too much). Other than that you’ll be fine.
by Crowell
Mon Feb 08, 2010 3:43 pm
Forum: Samsung Discussion
Topic: what now? (hlr5067w)
Replies: 8
Views: 9850

Re: what now? (hlr5067w)

Hmmmmm, that’s odd, ok if you turn on the tv right now, do you get those lines? If you do try to bring up the TV menu, if you are able to see it perfectly then it’s most definitely the analog board. If you can’t see the menu or its distorted in any way then it’s the DMD board. Hope this help you out.

Go to advanced search