Search found 24 matches
- Fri Nov 21, 2014 3:00 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
Well fox; the thing is; Ive just about exhausted every possibility i can think of; and at this point i just do not know what else to do because this thing has driven me out of my mind.....actually....too late for that.....I was already there before this and because of this thing lol. I just do not k...
- Thu Nov 20, 2014 2:28 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
[quote="grayfox"]No worries, Yes ok so the clicking has to be at the ballast end, so if you replaced the ballast, logically this would only leave the lamp, where did you purchase the lamp from?[/quote] Well the thing is; the lamp was brand new out of the box. And yes i do know that even brand new ou...
- Fri Nov 07, 2014 4:11 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
- Mon Nov 03, 2014 1:35 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
Sorry for being absent for so long from the forums; Ive just been uber uber busy over the past few months. Yes; it does seem as if i am getting a clicking every time i try to turn the tv on. But its hard to tell if its coming from the ballast for sure or coming from somewhere else. This is driving m...
- Thu Jul 17, 2014 9:08 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
Well; as far as where all the cables go for the main/analog board where the cable for cable tv go; fortunately it seems that each plug is different so they can only fit into one connector on the board so i believe i got them all in the right place. I will find out for sure though hopefully once and ...
- Tue Jul 15, 2014 2:37 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
Ok. Now that i know it should at least start up with a bad main board; Im gonna have to go the route of getting a new color wheel and try that out and see what happens. As far as the cables for the analog/digital board; yea i would appreciate any insight as to what goes where; so pics would be very ...
- Mon Jul 14, 2014 9:23 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
I dunno. Im thinking its still the color wheel as well. Someone else told me it could be the main/analog board where the cable for cable tv connects to so I took that out also to examine it and i did not see any burn marks or anything of that nature so i dont think that is the issue. Problem is now ...
- Mon Jul 14, 2014 4:15 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
- Tue Jul 08, 2014 4:02 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
I believe it could be a color wheel issue as well because I dont hear the spinning of the color wheel. As for the ballast; not sure about that one as thats been replaced with one thats been supposedly tested and is in working order so i dunno. As far as where i got my parts from. I got them all off ...
- Thu Jul 03, 2014 9:29 pm
- Forum: Samsung Discussion
- Topic: New Lamp Doesn't Turn On? Try This!
- Replies: 75
- Views: 1815580
Re: New Lamp Doesn't Turn On? Try This!
Can anyone shed light on what to do with this from here?: I just replaced every major component: the ballast, the color wheel, the ballast, and the lamp; and the dmd board; and i still can not get the lamp to fire. Before i replaced the color wheel which had shattered; everything was working fine. T...
- Thu Jul 03, 2014 9:18 pm
- Forum: Samsung Discussion
- Topic: Resetting the Samsung DLP Lamp Counter/Hour Meter
- Replies: 47
- Views: 1979477
Re: Resetting the Samsung DLP Lamp Counter/Hour Meter
I have just put a new authentic lamp not a knockoff in my hlr4667wax/xaa dlp tv(samsung). The thing is, now; after replacing the dmd board, the color wheel, the ballast board, and the lamp i still can not get the lamp to fire. I dont even hear any spinning of the color wheel when it tries to turn on...
- Wed Jul 02, 2014 9:22 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
I got the replacement lamp today which is a authentic original samsung lamp. Assuming this one is not defective which it appears its not but anything is possible; where do i go from here because i am still not getting the lamp to light and i am getting all 3 led's on the front power button flashing....
- Thu Jun 26, 2014 9:46 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
Well; i think i may have found my problem. Like a complete goof; I ordered a replacement lamp thinking it was a authentic original philips brand lamp for samsung dlp tvs; but instead i got a knock off lamp which i should have noticed from the start. So i ordered what appears to be the correct one wi...
- Thu Jun 26, 2014 2:28 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Re: Samsung hlr4667wax/xaa
- Wed Jun 25, 2014 9:17 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35025
Samsung hlr4667wax/xaa
Lamp wont fire on this tv!; Ive replaced all the other major components. Ive replaced the color wheel, the ballast, the dmd board and the lamp and i am still getting no lamp and all 3 led lights on the front are flashing. Where do i go with this now? I am sure I have gotten the correct replacement l...
- Fri May 16, 2014 4:24 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
- Wed May 14, 2014 2:21 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
- Tue May 13, 2014 9:13 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
[quote="grayfox"]Hello Matt, Sorry I had not stumbled upon your post! I highly doubt the DMD board has gone since the last thing to fail was the colorwheel. This means the TV was working fin until the Colorwheel shattered correct? if so I would make sure you have the correct colorwheel, which for th...
- Tue May 13, 2014 4:23 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
Well; the thing is I already replaced the color wheel for this tv; and its still acting like im not getting any power to the color wheel; which is why i had the thought of the issue being the dmd board because the dmd board provides power to the color wheel which in turn tells the ballast to fire; w...
- Mon May 12, 2014 3:16 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
- Sun May 11, 2014 3:00 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
- Fri May 09, 2014 9:49 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
Well; I believe that the dmd board could be the only possible solution; as I am getting no buzzing from the ballast; and no lamp and no spinning of the color wheel. yes i am positive i bought the correct one as the listing for it on ebay showed it was for my model tv. I dont think its the lamp; as i...
- Mon May 05, 2014 11:26 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Re: Samsung hlr4667wax/xaa dlp dmd board?
- Fri May 02, 2014 9:26 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16300
Samsung hlr4667wax/xaa dlp dmd board?
I am having issues with this tv. About 2 months ago; my color wheel broke. Before it broke; the lamp, ballast; and color wheel were working fine. After i ordered the new one; I installed it; reconnected all the wiring and tried to power it up. But I got no spinning of the color wheel; no sound of bu...