FixYourDLP.com Forums

I hope that did it, maybe it was referring to initialize the timer... I am not very familiar with Zenith / LG service menus... and the ballast is what powers up the lamp, its a small 3 by 6 inch board that plugs directly into the lamp , easy to instal ;) take a look, all plug and play http://www.fi...

I have seen this before when even after manually resetting the time meter it keep prompting! what I did was unplug my tv overnight and next morning it was gone, I have no idea if it will work for you, if it does not, I have to assume your TV has a weak ballast and its better to replace it now that ...

Hello, I think maybe the lamp you are trying to remove was forced in, I do not think you need to remove the plugs in order to remove the housing from the TV, do you have any images? also I know the forum moderators post videos on youtube yet I could not find one with you model number, do you have a...

Zenith model Z56DC1D. I replace the lamp and reset the lamp counter back to Zero. But I cannot get rid of the "replace Lamp" message that appears on the TV screen each time I turn on the TV. CAN ANYONE HELP ME WITH THIS??? I have went through the resetting of the counter 2 or 3 times but c...

I successfully replaced the Lamp and have reset the Lamp Counter back to Zero. BUT the message to "replace lamp" still comes up on the screen each time I turn on the TV. I have went through the procedure to reset the Counter 2 or 3 times and the counter is back to Zero but I cannot get rid...

I need assistance regarding the removal of the Housing containing the Lamp and a How to Replacement Guide for installing the new Lamp (Lamp Model AS-LX50). I have removed the lamp door on the TV and removed the 2 screws from the Housing - but it does not "slide out" as the information I ha...

I purchased a new Lamp Model AS-LX50 from the LG/Zenith company. The number for the Lamp I received is 6912B22010A. MY PROBLEM IS: I cannot find the "How To Guide" for this model of Zenith TV/Lamp. I am at step 2 - and have removed the 2 screws (as indicated on other DLP "how to"...