Search found 18 matches

by SrMerlyn
Fri Jan 21, 2011 11:46 pm
Forum: Samsung Discussion
Topic: Hlp-4663w won't turn on, makes a high pitched wine
Replies: 6
Views: 9143

Re: Hlp-4663w won't turn on, makes a high pitched wine

How long ago did you replace the lamp and ballast? Did you get those from parts store too? Did you purchase a Philips lamp?
by SrMerlyn
Fri Jan 21, 2011 12:28 am
Forum: Sony LCD Projection Discussion
Topic: kds-r60xbr1 color seems off
Replies: 1
Views: 6318

Re: kds-r60xbr1 color seems off

This model is known for the light engine going bad, and from what you've posted that is most likely the problem. The lamp is only a light source so it's not going cause this.
by SrMerlyn
Fri Jan 21, 2011 12:18 am
Forum: Sony LCD Projection Discussion
Topic: Identifying fake Philips lamps?
Replies: 2
Views: 7448

Re: Identifying fake Philips lamps?

Prior to 2010 the wattage was printed under the Philips stamp. After 2010 Philips started to print the wattage, serial # and date code on a white sticker located one the opposite corner of where the Philips stamp is.
by SrMerlyn
Thu Jan 20, 2011 11:34 pm
Forum: Sony LCD Projection Discussion
Topic: KDF-E55A20 - Possible Bad Lamp?
Replies: 2
Views: 7566

Re: KDF-E55A20 - Possible Bad Lamp?

If the lamp has 8000+ hours you should try that first. Worst case scenario you have a spare lamp.
by SrMerlyn
Thu Jan 20, 2011 11:33 pm
Forum: Sony LCD Projection Discussion
Topic: RIBBON CABLE MESS
Replies: 0
Views: 5522

Re: RIBBON CABLE MESS

You're going to have to replace the complete optical block. You should be able to find one reasonably priced at discount-merchant.com
by SrMerlyn
Thu Jan 20, 2011 11:16 pm
Forum: Samsung Discussion
Topic: HL61A650 Problem after already trying bulb
Replies: 3
Views: 5954

Re: HL61A650 Problem after already trying bulb

Is the lamp still covered under warranty? Maybe they can check it for you. If it's not the lamp it might something serious like the DMD board.
by SrMerlyn
Thu Jan 20, 2011 10:57 pm
Forum: Samsung Discussion
Topic: Saturated/blotchy picture quality on my HL-S5679W
Replies: 4
Views: 8852

Re: Saturated/blotchy picture quality on my HL-S5679W

If you are getting lines in the image it's most likely the DMD board. That is what I would suggest replacing first. The fact that the image is still distorted in the menu screens would eliminate the digital video board. I know discount-merchant has fair prices on complete light engines, but I am not...
by SrMerlyn
Thu Jan 20, 2011 10:52 pm
Forum: Samsung Discussion
Topic: Black screen
Replies: 3
Views: 5499

Re: Black screen

It's probably the digital video board or the DMD board. Kinda of hard to troubleshoot through a forum if your not getting an image.
by SrMerlyn
Thu Jan 20, 2011 10:45 pm
Forum: Samsung Discussion
Topic: Samsung hlp5085w thurn off and on
Replies: 5
Views: 8106

Re: Samsung hlp5085w thurn off and on

That is what I would try first since the lamp is almost 4 years old. Make sure your purchase the OEM Philips lamp. I purchase a lot of parts from discount-merchant and they have very competitive prices on OEM lamps. Let me know if you continue to have problems after replacing the lamp.
by SrMerlyn
Thu Jan 20, 2011 10:40 pm
Forum: Samsung Discussion
Topic: Hlp-4663w won't turn on, makes a high pitched wine
Replies: 6
Views: 9143

Re: Hlp-4663w won't turn on, makes a high pitched wine

Sounds like you have a defective color wheel. Make sure you are purchasing new parts from a reputable online company. You also want to make sure your are purchasing the newer air bearing color wheels. The older models had a regular bearing color wheel that caused a lot of problems so Samsung started...
by SrMerlyn
Thu Jan 20, 2011 10:31 pm
Forum: Samsung Discussion
Topic: HLR5067WX/XAA wont power on
Replies: 2
Views: 5932

Re: HLR5067WX/XAA wont power on

I would take the lamp out and visually inspect it to make sure it's not defective. You can't always tell whether or not a lamp is defective just by looking at it, but sometimes the burner will shatter or the wire coming from the burner will be frosted. If it is the lamp make sure your purchase the O...
by SrMerlyn
Thu Jan 20, 2011 6:24 pm
Forum: Samsung Discussion
Topic: Samsung DLP parts?
Replies: 3
Views: 6000

Re: Samsung DLP parts?

These Samsung TVs can be frustrating. If you hear the whining sound it is most likely time to replace the color wheel. You should be able to find one online for under $100. I've gotten a lot of Samsung color wheels from discount merchant. Samsungparts is ok too, but they usually don't ship same day....
by SrMerlyn
Thu Jan 20, 2011 6:12 pm
Forum: Samsung Discussion
Topic: Samsung hlp5085w thurn off and on
Replies: 5
Views: 8106

Re: Samsung hlp5085w thurn off and on

Do you get an image at any point? If there is no image and the TV is cycling on 3 times that usually indicates a bad color wheel. If you get an image and it is working intermittently then it is probably the lamp or ballast. I would take the lamp out and check the date code to see how old it is. If i...
by SrMerlyn
Thu Jan 20, 2011 12:26 am
Forum: Mitsubishi Discussion
Topic: WD65734 with red Status Light
Replies: 3
Views: 6242

Re: WD65734 with red Status Light

Have you ever replaced the lamp? If you have never replaced the lamp I would try that first. That is the easiest way to troubleshoot the TV, and worst case scenerio, you have a spare lamp if the new one doesn't fix the problem. Where did you learn about the error codes? Was it directly from the serv...
by SrMerlyn
Thu Jan 20, 2011 12:10 am
Forum: Mitsubishi Discussion
Topic: WD-52631
Replies: 5
Views: 10647

Re: WD-52631

Ekwork, Have you ever replaced the lamp. A defective lamp can cause a clicking or buzzing sound. If you haven't replaced the lamp you should try that first. If it's not the lamp you can keep the new one as a spare. The ballast is a really common problem with DLPs so you should be able to find it onl...
by SrMerlyn
Wed Jan 19, 2011 11:39 pm
Forum: Mitsubishi Discussion
Topic: TV has sound but no picture
Replies: 1
Views: 4208

Re: TV has sound but no picture

It's really uncommon for these lamps to fail so soon, but not impossible. If the lamp is covered under a warranty I would send it back to Mitsubishi and get a new one. If the replacement still doesn't work then you would definitely know it's not a lamp problem. Do you hear any strange noises coming ...
by SrMerlyn
Wed Jan 19, 2011 11:26 pm
Forum: Samsung Discussion
Topic: Resetting the Samsung DLP Lamp Counter/Hour Meter
Replies: 47
Views: 983748

Re: Resetting the Samsung DLP Lamp Counter/Hour Meter

lynnv268,

Does the TV cycle on three times before it shuts off? Do you hear a humming or whining noise. When the color wheel goes bad on Samsung TVs it's common for them cycle on three times before shutting off.
by SrMerlyn
Wed Jan 19, 2011 11:13 pm
Forum: Samsung Discussion
Topic: Samsung 5067 getting weird
Replies: 5
Views: 9029

Re: Samsung 5067 getting weird

This could also be the DMD board. A really easy way to troubleshoot this is to go to a menu screen or PIP when the image is distorted. The menu screen and PIP image bypasses the digital video board. If the digital video is bad the PIP image will not be distorted. If that image is also distorted then...

Go to advanced search