Search found 189 matches
- Thu Jun 03, 2010 8:15 pm
- Forum: Samsung Discussion
- Topic: Samsung HL-S5687W shuts off 3 lights blinking
- Replies: 4
- Views: 8005
Re: Samsung HL-S5687W shuts off 3 lights blinking
Remember that the Samsung sets Cary the Philips, lamps.
- Thu Jun 03, 2010 8:11 pm
- Forum: Forum Feedback
- Topic: Why does it take so long for a post to be approved
- Replies: 2
- Views: 8911
Re: Why does it take so long for a post to be approved
Post your question again, surely they'll get to it. Otherwise I'll try to help yah.
please Post your question again.
please Post your question again.
- Thu Jun 03, 2010 8:10 pm
- Forum: Projectors
- Topic: Samsung HL - p5085w rear projection tv please help
- Replies: 1
- Views: 7649
Re: Samsung HL - p5085w rear projection tv please help
HI, It is the first thing that goes out on these tvs. If you have the indicator light on the from on. more than likely you just need to replace the lamp. The guys over at discount-merchant.com actually offer free technical trouble shooting. I trully think is the lamp. all the symptoms you state rela...
- Mon May 10, 2010 2:34 pm
- Forum: Samsung Discussion
- Topic: HL-R4667W freezes, sound works, shuts off
- Replies: 3
- Views: 5270
Re: HL-R4667W freezes, sound works, shuts off
Well... you could check your lamp, you're probably due for a new one by now. after the fist lamp replacement they tend to last a bit less, but since you have a fairly new ballast. I'd say if you need to only replace the lamp it'll be worth it to keep it.
- Thu Apr 29, 2010 2:19 pm
- Forum: Greeting
- Topic: New to the forum? Introduce yourself!
- Replies: 43
- Views: 87659
Re: New to the forum? Introduce yourself!
Really cool site, very informative. To people that post questions. Please be specific even if it takes you a couple more lines here or minutes. Apparently we all like to help out, So... Help yourself by helping the techs here.
Welcome people :mrgreen:
Welcome people :mrgreen:
- Mon Apr 26, 2010 8:32 pm
- Forum: DLP, LCD Projection, and other RPTV
- Topic: Need information to replace the ballast
- Replies: 2
- Views: 5200
Re: Need information to replace the ballast
well... If you have no picture, there are other components besides the lamp that could be affecting the image. if you hear a clicking, or a noise like an electrical buzzing. It can be your ballast. there a website. discount-merchant.com, those guys have free trouble shooting and they have tv part av...
- Mon Apr 26, 2010 8:09 pm
- Forum: Toshiba DLP Discussion
- Topic: 44HM85 Lamp indicator flashing red
- Replies: 3
- Views: 7962
Re: 44HM85 Lamp indicator flashing red
more than likely you're experiencing a problem with your ballast.
- Fri Apr 23, 2010 9:31 pm
- Forum: Samsung Discussion
- Topic: lamp interchangability
- Replies: 5
- Views: 6643
Re: lamp interchangability
well your model # HLN507W, is for a samsung tv, Not sure why you'd have3 a toshiba lamp in your tv. But if that is the case you should get the philips lamp listed below.
SAMSUNG HLN507W TV LAMP REPLACEMENT BULB
SAMSUNG HLN507W TV LAMP REPLACEMENT BULB
- Fri Apr 23, 2010 9:15 pm
- Forum: All About Lamps
- Topic: HLP6163WX/XAA
- Replies: 1
- Views: 11643
Re: HLP6163WX/XAA
Here's some tips to help you identify the problem. 1. The TV gives a "Lamp Replacement" code when powering on the TV even when the lamp has been replaced. 2. The TV does not make a "Click" noise or "Surge" when pressing the power button. The click noise is one of the fa...
- Fri Apr 23, 2010 9:12 pm
- Forum: Panasonic Discussion
- Topic: PT-52LCX16 Questions
- Replies: 17
- Views: 32095
Re: PT-52LCX16 Questions
fixmytv, it definitely sounds like a ballast problem the buzzing you're hearing is the ballast attempting to light up your lamp. It isn't very expensive. you can check for availability at discount-merchant.com. they have good prices.
- Mon Apr 19, 2010 2:11 pm
- Forum: Mitsubishi Discussion
- Topic: WD-73732 Red Lamp light after 5 min
- Replies: 4
- Views: 7000
Re: WD-73732 Red Lamp light after 5 min
Definitely worth fixing, You're looking at a ballast for this tv roughly $70. to $100. Bucks. If you have a good lamp, you probably won't have to worry about the set for a couple yrs.
- Fri Apr 16, 2010 10:11 pm
- Forum: Forum Feedback
- Topic: a little help The TV won't turn on
- Replies: 1
- Views: 7567
a little help The TV won't turn on
Mitsubishi VS-60111 60 in. Rear Projection Television Mitsubishi VS-60111TV won't turn on Answer Failed: retry The TV won't turn on; the electric went off and everything came back on except the TV. Tried... (More) (More) The TV won't turn on; the electric went off and everything came back on except ...
- Fri Apr 16, 2010 8:42 pm
- Forum: Mitsubishi Discussion
- Topic: WD-73732 Red Lamp light after 5 min
- Replies: 4
- Views: 7000
Re: WD-73732 Red Lamp light after 5 min
Nimmer, it can be your ballast, the ballast board is in charged of providing your lamp with the proper voltage. Once the ballast starts going bad you CAN experience this symptoms. If your picture come on even for a sec. The lamp still doing it's job. Something else is provoking your light to come on...
- Thu Apr 15, 2010 9:13 pm
- Forum: Projectors
- Topic: Olevia Syntax LCT50HV, how can I reset lamp hours
- Replies: 4
- Views: 11750
Re: Olevia Syntax LCT50HV, how can I reset lamp hours
dtrixny, did some research and I had no luck, finding the way to reset the lamp timer on your tv. Some tvs don't have a timer to re-set. It could be the case on your tv.
- Thu Apr 15, 2010 7:37 pm
- Forum: Panasonic Discussion
- Topic: PT-52LCX16 Questions
- Replies: 17
- Views: 32095
Re: PT-52LCX16 Questions
I'm not sure about the capacitor, but the ballast, would cause this symptoms. The buzzing and clicking are common indicators of the ballast, not being able to produce the necessary voltage to support the new lamp. It isn't necessary to change the ballast every time you change a lamp. However if your...
- Thu Apr 15, 2010 7:29 pm
- Forum: Forum Feedback
- Topic: No sound and dark screen?
- Replies: 1
- Views: 9103
Re: No sound and dark screen?
As far as the sound coming from the stereo and not the tv, check your connections. The dark picture can be attributed to the lamp, perhaps it's time to replace the lamp. If you've replaced your lamp recently, do check your ballast board.
- Thu Apr 15, 2010 7:14 pm
- Forum: Samsung Discussion
- Topic: 46 inch DLP Problem after replacing lamp and wheel
- Replies: 2
- Views: 4086
Re: 46 inch DLP Problem after replacing lamp and wheel
It appears that you might need to check your ballast, here are some tips on this board and it's functions. 1. The TV gives a "Lamp Replacement" code when powering on the TV even when the lamp has been replaced. 2. The TV does not make a "Click" noise or "Surge" when pre...
- Wed Apr 14, 2010 8:45 pm
- Forum: Samsung Discussion
- Topic: Horizontal Bars
- Replies: 1
- Views: 3282
Re: Horizontal Bars
If you get green vertical bars or green dots in the picture and in the menu screen (DMD symptom) If you get green vertical bars or green dots in the picture but not in the menu screen (Digital board symptom as far as replacing the boards yourself, it can be done if you have experience, welcome to it...
- Tue Apr 13, 2010 10:34 pm
- Forum: LCD Televisions
- Topic: Samsung 40 inch (LE40R51B) Uniform dark patches
- Replies: 3
- Views: 11713
Re: Samsung 40 inch (LE40R51B) Uniform dark patches
please add more details as far as tv model. mot sure by the pic if you have a dlp-lcd.
- Tue Apr 13, 2010 10:31 pm
- Forum: Mitsubishi Discussion
- Topic: lamp check
- Replies: 1
- Views: 3739
Re: lamp check
that won't work. matter of fact I'm not sure if your local tv repair-shop would even have equipment to test a lamp.Ohm meter, won't help. Unless you have a ballast laying around to test it. You may not be able to.
- Tue Apr 13, 2010 9:41 pm
- Forum: Samsung Discussion
- Topic: 46 inch DLP Problem after replacing lamp and wheel
- Replies: 5
- Views: 6496
Re: 46 inch DLP Problem after replacing lamp and wheel
do you hear like an electrical buzzing, or any clicking? if you do it can potentially be your ballast. check your lamp as well just to see if there's any physical damage, black dots, crack in the filament etc... If you post more details as far as the noises I'd be glad to go further into your proble...
- Tue Apr 13, 2010 8:47 pm
- Forum: Toshiba DLP Discussion
- Topic: 56HM195 Blue Ghosting/Smearing
- Replies: 3
- Views: 9815
Re: 56HM195 Blue Ghosting/Smearing
It's hard to tell, considering the pictures the vertical line tells me that it can be the DMD board, however the pother picture looks like your lamp might be out of position it lights brighter to the left side. Start by checking your lamp pull it out from the housing. the lamp won't cause the vertic...
- Tue Apr 13, 2010 5:20 pm
- Forum: Samsung Discussion
- Topic: HLP5063W picture slightly off-kilter
- Replies: 5
- Views: 6567
Re: HLP5063W picture slightly off-kilter
This is going to sound silly, but It just might be what's going on here.
You probably have your screen zoomed a bit. check your remote just to make sure.
You probably have your screen zoomed a bit. check your remote just to make sure.
- Tue Apr 13, 2010 5:16 pm
- Forum: Samsung Discussion
- Topic: HL-S4666W Old lamp works, new lamp doesn't
- Replies: 5
- Views: 6326
Re: HL-S4666W Old lamp works, new lamp doesn't
There can be a couple of things here. Is the humming more like an electrical humming? or more like a mechanical humming. To get closer to your answer let me explain: the color wheel should provoke an extra vibration, the humming could be caused by the ballast, not being able to produce enough voltag...
- Tue Apr 13, 2010 2:45 pm
- Forum: Technical Specs
- Topic: New Lamp
- Replies: 1
- Views: 6022
Re: New Lamp
The best way to get the right part number for your tv lamp. If you went to Discount-Merchant, I've used their search engine. Just enter the model # of your tv set and if they have it in stock, you'll get a reply with the lamp's part number.
- Fri Apr 02, 2010 7:34 pm
- Forum: Samsung Discussion
- Topic: reoccuring brightness/dimming problem
- Replies: 2
- Views: 2972
Re: reoccuring brightness/dimming problem
Hi Gator, Well depending on the age of your tv and how many times you've replaced the lamp. More than likely you need to replace the lamp. some times " not all times" the ballast will have some warning symptoms like, a clicking, buzzing, the tv will turn off by itself after a while. But if...
- Wed Mar 31, 2010 2:17 pm
- Forum: DLP, LCD Projection, and other RPTV
- Topic: cant find colour wheel for tv
- Replies: 1
- Views: 3923
Re: cant find colour wheel for tv
Not sure what those numbers are I checked them all and didn't really find anything. The best thing to do at this point would be to call the manufacturer with your serial number and get the part numbers from them. It can be time consuming. Key numbers are: exact tv model and the particular part numbe...
- Sat Mar 27, 2010 12:05 am
- Forum: Samsung Discussion
- Topic: Samsung Fan noise
- Replies: 2
- Views: 3964
Re: Samsung Fan noise
It can potentially be your color wheel. Are you getting color distortion? Perhaps you could provide more details. I have heard a variation of this symptom. But color distortion was a key factor for my friend's tv.
- Fri Mar 26, 2010 11:55 pm
- Forum: Forum Feedback
- Topic: Suggest New Topics
- Replies: 4
- Views: 10530
Re: Suggest New Topics
Alright Eddie, I have a good one for ya. If you replace the lamp does it affect it's durability if you don't set the lamp timer? ALSO: if you have factory Osram, lamp and you go for a Philips to replace lamp. does that affect the ballast performance in the long run? Me and a couple friends here have...
- Fri Mar 26, 2010 11:04 pm
- Forum: LG/Zenith Discussion
- Topic: Restting the lamp hours to other than factory
- Replies: 1
- Views: 4688
Re: Restting the lamp hours to other than factory
You can go to Google enter you tv's model. check for lamp timer settings, try to set the grade accordingly to the specifics regarding your particular model. On your tv's users guide you may be able to find that setting. Other wise, if you're referring to something else please be more specific so tha...
- Fri Mar 26, 2010 10:58 pm
- Forum: Projectors
- Topic: Do I have a projector?
- Replies: 1
- Views: 7413
Re: Do I have a projector?
Hey Joel. Your DLP, can potentially still last you a while. If you get a chance post some of the problems you're having with your set.
There is a lot of knowledgeable people here in the forums.
Post your tv's symptoms and we'll see how you can get your DLP running again.
There is a lot of knowledgeable people here in the forums.
Post your tv's symptoms and we'll see how you can get your DLP running again.
- Fri Mar 26, 2010 7:49 pm
- Forum: Plasma Televisions
- Topic: Sanyo DP42746 circuit Board Identification help
- Replies: 1
- Views: 6766
Re: Sanyo DP42746 circuit Board Identification help
Izzy, the most important thing is to get the actual part number from the particular board you need to replace. That's really the only way to find the correct part. If you only use your tv's model. You may not get the right one for your tv's year and model. So it has to match part # and model #. That...
- Fri Mar 26, 2010 6:43 pm
- Forum: DLP, LCD Projection, and other RPTV
- Topic: 52" HP DLP needs realignment
- Replies: 2
- Views: 3562
Re: 52" HP DLP needs realignment
Pepe's actually on point here, the parts that are potentially wrong on your tv set are inexpensive and it might be worth keeping it.
Personally I'd lean toward the ballast if the symptoms pepe mentioned are there.
If you hear a buzzing, humming or rapid clicking noises (Ballast symptoms)
Personally I'd lean toward the ballast if the symptoms pepe mentioned are there.
If you hear a buzzing, humming or rapid clicking noises (Ballast symptoms)
- Fri Mar 26, 2010 5:20 pm
- Forum: DLP, LCD Projection, and other RPTV
- Topic: dark shded
- Replies: 4
- Views: 6570
Re: dark shded
Hello, yomutsu, has a good point. If you have replaced the ballast and lamp at the same time. I guess setting up the lamp timer can help. Something that you have to do anyway. That way your ballast disperses the correct voltage to your new lamp. Other than that "hopefully not" you may be l...
- Fri Mar 26, 2010 5:14 pm
- Forum: All About Lamps
- Topic: 2nd lamp went out a month later
- Replies: 6
- Views: 18630
Re: 2nd lamp went out a month later
Hey, did you set the lamp timer? that may have something to do with the new lamp not working properly, also try the old lamp. If the old lamp still lights up ballast is good. But more than likely you have a ballast issue. Specially if you hear frequent clicking noises or buzzing. Common indicators o...
- Fri Mar 26, 2010 4:04 pm
- Forum: All About Lamps
- Topic: using a generic lamp in my dlp?
- Replies: 11
- Views: 27066
Re: using a generic lamp in my dlp?
Philips lamps are really the way to go. Unless you have a mitsu. I noticed that they burn up philips way before the estimated 8000 hrs. But this have originally Osram lamps. (some Mitsu models) Like... Model: wd-5262a.
- Wed Mar 24, 2010 10:18 pm
- Forum: Plasma Televisions
- Topic: need help trouble shooting
- Replies: 2
- Views: 7352
Re: need help trouble shooting
It could also be the DMD board, the vertical lines are a frequent sign.
- Wed Mar 24, 2010 5:43 pm
- Forum: LCD Televisions
- Topic: SONY KDSR60XBR1
- Replies: 3
- Views: 10247
Re: SONY KDSR60XBR1
You might be having a color wheel problem, however you need to post more details regarding this issue.
- Wed Mar 24, 2010 5:42 pm
- Forum: LCD Televisions
- Topic: Maxent L2614XW02 Sound but no picture?
- Replies: 1
- Views: 7392
Re: Maxent L2614XW02 Sound but no picture?
I'd like more details. but here are some hints.
If you heard a loud popping sound (Lamp symptom)
If your TV shuts off after a couple of minutes (Lamp symptom)
“So if you get any of the previous symptoms then it is most likely the lamp”
If you heard a loud popping sound (Lamp symptom)
If your TV shuts off after a couple of minutes (Lamp symptom)
“So if you get any of the previous symptoms then it is most likely the lamp”