Search found 1047 matches
- Fri Sep 19, 2014 9:10 pm
- Forum: Samsung Discussion
- Topic: Samsung HLN5065WX/XAA Won't Turn On
- Replies: 4
- Views: 7242
Re: Samsung HLN5065WX/XAA Won't Turn On
Hello and thank you for the detailed description, Well from what I figure from your extensive trouble shooting, the original lamp and ballast might have been damaged in the power surge. No need to buy a multimeter the ignition charge needed is around 15kV more than any regular meter can handle witho...
- Wed Sep 17, 2014 11:32 pm
- Forum: Samsung Discussion
- Topic: Continuation of ColorWheel Cables saga
- Replies: 3
- Views: 6462
Re: Continuation of ColorWheel Cables saga
Hey KEN, Would you mind refreshing my memory with your TV Model # and the Part number (usually begins with BP96-######) of the colorwheel you ordered? These are normally plug and play parts, however during installation i have been known to assemble with a few skewed corners to which the only solutio...
- Mon Sep 15, 2014 9:20 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
- Mon Sep 15, 2014 9:19 pm
- Forum: Samsung Discussion
- Topic: Continuation of ColorWheel Cables saga
- Replies: 3
- Views: 6462
Re: Continuation of ColorWheel Cables saga
I have emailed the sysadmin of the website, I just have admin roles on a forum level, I will get back to you when its up.
- Fri Sep 12, 2014 11:13 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Glad to hear that is the case, I hope this thread helps others, do you mind sharing the colorwheel model number for your TV?
Thanks!
- Fri Sep 12, 2014 7:32 pm
- Forum: Samsung Discussion
- Topic: SP50L7HX won't start up...help!
- Replies: 3
- Views: 6228
Re: SP50L7HX won't start up...help!
- Fri Sep 12, 2014 7:06 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Thank you in advance
- Thu Sep 11, 2014 11:23 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Hi again, well I think you have defiantly rounded this down, please when you have a DIY project never ever throw away anything (that's my number 1 rule) So this has to be one of the most common pieces, I do not think , given what you have explained, that this can be anything too complicated, maybe a...
- Thu Sep 11, 2014 11:17 pm
- Forum: Samsung Discussion
- Topic: SP50L7HX won't start up...help!
- Replies: 3
- Views: 6228
Re: SP50L7HX won't start up...help!
Hello, ok this one is a little peculiar given the order in which you describe this happened. I would one: make sure you remove the back door once more and check to see if the door trigger if placed correctly and has not been pushed away during removal. I would next inquire as to when the last time y...
- Tue Sep 09, 2014 5:29 pm
- Forum: Samsung Discussion
- Topic: hlr5667 have a manual iris?
- Replies: 10
- Views: 13372
Re: hlr5667 have a manual iris?
- Tue Sep 09, 2014 5:14 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
- Mon Sep 08, 2014 7:28 pm
- Forum: Samsung Discussion
- Topic: hlr5667 have a manual iris?
- Replies: 10
- Views: 13372
Re: hlr5667 have a manual iris?
- Mon Sep 08, 2014 6:22 pm
- Forum: Samsung Discussion
- Topic: hlr5667 have a manual iris?
- Replies: 10
- Views: 13372
Re: hlr5667 have a manual iris?
I think I got it from the same site as you. It covers similar models just ranging in screen size. They all seem to have automatic iris... could not find what seq to adjust..
You had any luck?
- Mon Sep 08, 2014 6:18 pm
- Forum: Mitsubishi Discussion
- Topic: WD 60738 screen flickers
- Replies: 6
- Views: 13665
Re: WD 60738 screen flickers
Also you can make sure if the tech is NESDA certified at their website
- Mon Sep 08, 2014 6:16 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 44046
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hope I can be of some help, if you have images of the damage please post!
- Mon Sep 08, 2014 6:14 pm
- Forum: Mitsubishi Discussion
- Topic: Remote sensor not working
- Replies: 5
- Views: 12403
Re: Remote sensor not working
Oh thats good news, especially during football (if you are a fan). I have a big screen Mitsubishi DLP also 52", used mostly for gaming, HDMI at full resolution! My biggest problem is that it uses about a lamp a year and every 2 or 3 lamps I have to replace the ballast as well.. Otherwise, no complai...
- Sat Sep 06, 2014 12:22 am
- Forum: Mitsubishi Discussion
- Topic: Remote sensor not working
- Replies: 5
- Views: 12403
Re: Remote sensor not working
Hello, This might be the "button set/ remote sensor" depending on your model. most Mitsubishi it comes in one small board. Before you take your TV apart, do the buttons on the TV operate the TV normally without any malfunction? try navigating the menu, switching inputs etc.. I mention this because i...
- Thu Sep 04, 2014 4:16 pm
- Forum: Mitsubishi Discussion
- Topic: WD 60738 screen flickers
- Replies: 6
- Views: 13665
Re: WD 60738 screen flickers
Amazon and eBay are swamped with knock offs!
Do you get any color distortion at all or any whirling humming noises from the TV? the colorwheel can cause a flicker if not properly spinning at the rpms necessary..
- Thu Sep 04, 2014 12:50 am
- Forum: Mitsubishi Discussion
- Topic: WD 60738 screen flickers
- Replies: 6
- Views: 13665
Re: WD 60738 screen flickers
Hello, Sorry to hear that, most of the times it is just a bad lamp with Mits DLP (believe me I have one). Since you just replaced the lamp, and the symptoms are those of a faulty/spent lamp, I have to ask if you purchased an OEM Mitsubishi 915B441001? The ones I put on my TV are normally Original Ph...
- Wed Sep 03, 2014 7:46 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27422
Re: Samsung HLP6163 Light Engine/ DMD
good luck, keep us posted!
- Wed Sep 03, 2014 7:10 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27422
Re: Samsung HLP6163 Light Engine/ DMD
This sounds like it worked halfway... And yes techs in the west coast are more patient, and I am not saying that just because I work out of CA but because i deal with clients Statewide!
I can maybe attribute this to the dmd chip if the board is working properly.. did you try both DMD chips?
- Wed Sep 03, 2014 6:49 pm
- Forum: Samsung Discussion
- Topic: samsung hl s5087
- Replies: 5
- Views: 8642
Re: samsung hl s5087
- Wed Sep 03, 2014 6:48 pm
- Forum: Samsung Discussion
- Topic: hlr5667 have a manual iris?
- Replies: 10
- Views: 13372
Re: hlr5667 have a manual iris?
Wow may I ask where you acquired it? if its in PDF or other digital format i would love a copy to add to my library ill will PM you.
So as to the Iris, like I mentioned most are auto or dynamic, self adjusting. Is there a particular problem with your set?
- Wed Sep 03, 2014 6:01 pm
- Forum: Samsung Discussion
- Topic: HLS5086WX/XAA Loud Intermittent Popping Sound
- Replies: 5
- Views: 8440
Re: HLS5086WX/XAA Loud Intermittent Popping Sound
Well given that I learned most of what geek-squad knows from opening electronics apart at a young age, I do not think they could replace this board any better than you could if you feel handy with a screwdriver.. there's nothing to cut or solder, just connectors and screws. You would first need to r...
- Wed Sep 03, 2014 5:52 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Hello again and sorry to hear the repair was a false alarm..! Well now you got me a little confused and split between one of two: -The ballast has some physical differences but worked.. I wonder if the model is not accurate, can you double check that you ordered a BP47-00037A Ballast? -The lamp. Thi...
- Fri Aug 29, 2014 7:00 pm
- Forum: Samsung Discussion
- Topic: Beeping
- Replies: 1
- Views: 4042
Re: Beeping
Have you tried running this after manually turning on the TV with the power button on the set, and then running the keypress combinations?
- Fri Aug 29, 2014 6:59 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Do you have images you can share? This might just be a capacitor variance.. if the model numbers show as compatible I don not see why I would not install it and give it a try!
- Tue Aug 26, 2014 10:21 pm
- Forum: Samsung Discussion
- Topic: Purple Pink Static
- Replies: 1
- Views: 10329
Re: Purple Pink Static
Hello! This is most likely the light tunnel on the light engine being miss aligned.. I would take it out and reassemble it carefully making sure every screw and socket fir snugly in its place and most importantly that there are no skewed or bent parts on any of the internals (such that can happen wi...
- Tue Aug 26, 2014 10:18 pm
- Forum: Samsung Discussion
- Topic: samsung hl s5087
- Replies: 5
- Views: 8642
Re: samsung hl s5087
- Tue Aug 26, 2014 10:15 pm
- Forum: Mitsubishi Discussion
- Topic: WD-73738 shutting off.
- Replies: 2
- Views: 8720
Re: WD-73738 shutting off.
Hello, I am almost certain that with that much use your TV needs a new lamp! That clicking sound you are hearing is the ballast trying to ignite the spent lamp. Maybe you can take it out for a physical inspection? The Lamp model for WD-73738 is a Mitsubishi 915B441001 and in my personal experience O...
- Tue Aug 26, 2014 10:04 pm
- Forum: Samsung Discussion
- Topic: Samsung HLT5075SX/XAA lamp overheating
- Replies: 6
- Views: 11295
Re: Samsung HLT5075SX/XAA lamp overheating
Increased airflow, as you know, will always optimize electrical equipment lifespan. If your old ballast gives you a bright picture, have you considered leaving it installed and putting the TV back together? maybe you can get some use out of it that way? then when the time comes you can replace this ...
- Tue Aug 26, 2014 10:00 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35043
Re: Samsung hlr4667wax/xaa
- Tue Aug 26, 2014 9:58 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27422
Re: Samsung HLP6163 Light Engine/ DMD
- Tue Aug 26, 2014 9:55 pm
- Forum: Samsung Discussion
- Topic: 50" Samsung DLP HLP5063w - Continuing Issue
- Replies: 3
- Views: 7007
Re: 50" Samsung DLP HLP5063w - Continuing Issue
Please let me know if you need any help!
- Tue Aug 26, 2014 9:54 pm
- Forum: Mitsubishi Discussion
- Topic: WD-60735 flashing then red light
- Replies: 2
- Views: 9077
Re: WD-60735 flashing then red light
- Tue Aug 26, 2014 9:52 pm
- Forum: Samsung Discussion
- Topic: Last Try...before parting this thing out !!!!!
- Replies: 2
- Views: 5459
Re: Last Try...before parting this thing out !!!!!
I think if you remove the chip and get a part number off the chip itself you can find it online easily, then use that new chip on the DMD board that had everything working but gave you lines on screen. Its worth a try if you can find it cheap. Once you know the model let me know and ill help you loo...
- Tue Aug 26, 2014 9:49 pm
- Forum: Mitsubishi Discussion
- Topic: Mitsubishi power light blinking green
- Replies: 1
- Views: 5975
Re: Mitsubishi power light blinking green
Hello, do you have the TV model number? It is highly likely the light tunnel on the light engine might have misaligned in the transport and nos the lamp does not fit properly or the light being emitted is not striking the colorwheel in the correct areas (hence the green tint).. What I would do first...
- Tue Aug 26, 2014 9:44 pm
- Forum: Samsung Discussion
- Topic: HL-S6187WX/XAA - New Lamp not firing
- Replies: 21
- Views: 25383
Re: HL-S6187WX/XAA - New Lamp not firing
Hello, First of all just to make sure you should have received a Philips brand bulb from Samsung with model number BP96-01472A. Having the correct original bulb makes sure your picture is bright and like new. By the descriptions you mention this can be either a ballast or colorwheel, depending on th...
- Tue Aug 26, 2014 9:23 pm
- Forum: Samsung Discussion
- Topic: hlr5667 have a manual iris?
- Replies: 10
- Views: 13372
Re: hlr5667 have a manual iris?
Hello, I imagine you are working around the service menu of your television. I do not think the iris can be adjusted manually, I am not sure about this model but most DLP technology uses automatic iris and only certain settings can be adjusted like "Dynamic Iris" etc.. Getting your hands on a servic...
- Tue Aug 26, 2014 6:22 pm
- Forum: Samsung Discussion
- Topic: HLS5086WX/XAA Loud Intermittent Popping Sound
- Replies: 5
- Views: 8440
Re: HLS5086WX/XAA Loud Intermittent Popping Sound
Hello, After doing a little bit of research into this model it seems it is really common with the Samsung HLS5086WX/XAA. The culprit can be the main input board which also has the output jacks. "Skipping" this problem and going directly to the external might have delayed the inevitable: to have the ...
- Tue Aug 12, 2014 9:01 pm
- Forum: Samsung Discussion
- Topic: HLS-6767WX/XAA
- Replies: 1
- Views: 3227
Re: HLS-6767WX/XAA
Wow seems like you have done some work to this TV, and it is worth it for this is a beautiful hug screen. Well thanks to your points I was able to determine two things I would do next if this was mine. Because of the clicking you describe I want to focus my troubleshooting on the most common and eas...
- Tue Aug 12, 2014 7:36 pm
- Forum: Samsung Discussion
- Topic: samsung hl s5087
- Replies: 5
- Views: 8642
Re: samsung hl s5087
Hello, This is actually very common once the lamp has been replaced a couple of times, this is most likely a Lamp Ballast issue, I believe the part number for your TV is BP47-00037A. This link below has a guide on replacing the ballast on Samsung TVs, it has a very nice DIY step by step, hope it hel...
- Tue Aug 12, 2014 7:32 pm
- Forum: Mitsubishi Discussion
- Topic: wd 82738
- Replies: 1
- Views: 7158
Re: wd 82738
Hello Steve, If the light turned to just a red blinking light on the front, I would begin with taking a visual inspection of the lamp. Like I have mentioned many times before 90% of the time Mitsubishi TVs just need a new OEM lamp (I prefer to use Philips bulbs) like for your WD 82738 which uses a 9...
- Wed Jul 30, 2014 8:25 pm
- Forum: Samsung Discussion
- Topic: Hlr5067wax/xaa hdmi stopped working
- Replies: 1
- Views: 3081
Re: Hlr5067wax/xaa hdmi stopped working
Hello slowcelica, It sounds to me that you have a bad input board and/or digital video board.. Quick explanation on how they work: The main input board has both digital and analog inputs, this send the digital inputs directly to the "motherboard" (DMD) to be displayed as images on your screen. Now a...
- Wed Jul 30, 2014 8:06 pm
- Forum: Samsung Discussion
- Topic: Samsung HLN437WX / XAA
- Replies: 1
- Views: 3020
Re: Samsung HLN437WX / XAA
Hello Blowndsg, I am sorry to hear that, I guess I can try by giving you a basic explanation of some of the boards that I think you looked at, even though when theres a power surge no component is safe. The primary suspect would be the one that plugs the TV into the Power Outlet, this is called a Ma...
- Thu Jul 24, 2014 4:42 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 44046
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
before you do so please remember to test out every input or at least a Digital (like HDMI) and an Analog (like component) just to see if the distortion is noticed on both. And lastly the OSD, on screen displays, the TV menu, the volume bars channel number etc...
- Tue Jul 22, 2014 11:29 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 44046
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hello keen, So if I picture your issue by that detailed description my thoughts keep coming back to a faulty or maybe misaligned colorwheel. Where you sure to place everything and tighten (not overly) every screw? The colorwheel listed by Samsung for your HLR6168WX/XXA is the BP96-01103A is this the...
- Mon Jul 21, 2014 7:21 pm
- Forum: Samsung Discussion
- Topic: Samsung DLP white dots fix?
- Replies: 11
- Views: 20545
Re: Samsung DLP white dots fix?
Hello! For your model HLT6156WX/XAA I went specifically to http://www.samsungparts.com/partslist.aspx?Catalog=Parts_and_Accessories&Category=HLT6156WX%2fXAA Where I get number 4719-001997 DLP CHIP Note this is Samsungs go to site for parts, they have a drop down menu to choose the version, pleas...
- Fri Jul 18, 2014 5:35 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 44046
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
MikeL65, sorry your account did not activate in a timely manner, ill send the moderator a PM to stay on top of it. KEENLALOU2, glad to hear everything worked out, I was almost certain it was just a light tunnel alignment issue. Hopefully you wont have to post anytime soon but people are here to help...
- Tue Jul 15, 2014 7:12 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35043
Re: Samsung hlr4667wax/xaa
Let me know how it goes, hopefully that ebay seller will do good on his word and let you test an exchange. Unfortunately I did not find a pic of an installed main input board.. Will try www.samsungparts.com their support team is usually helpful, I will get back to you once they respond. Keep me upda...