FixYourDLP.com Forums

Angel

Once the green ghost appears display the TV menu. If the menu is displayed without being affected by the ghost then the problem could be in your analog board (since the HDMI input works fine). If the menu is also affected then as Eddie said, you have a DMD issue. However vacuuming all the dust alway...

Angel

The DMD board is the one that control the menus.

Angel

Hmm, how expensive is this going be, I wonder? Is it something I could maybe fix myself instead of buying a whole new analog board? I must say this is by far the worst electronic purchase I have ever made, but I am learning so much about DLP TVs and how they work. Oh, well, live and learn I guess. ...

Angel

well i took off the back cover, and found part number BP63-00344a the screen was looking all red and greenish, i turned it off and it wouldn't want to turn back on. it would just flash the lights after it wouldnt turn on the screen. the lamp and fans will fire, but will shut off as i'm watching it ...

Angel

I have a 61" samsung dlp tv that the screen turns green and it freezes up. I have narrowed it down to the analog board. Does anyone know what ic goes bad on the board. I can do component level work. I am just unsure which chip to replace. Your problem sounds like a DMD board issue, are you sur...

Angel

Angel

Well you can replace the ports if you have technical skills, but if you haven't then replace the whole digital board.

Angel

Do you get any type of clicking noises?, if not, then it could be a bad bulb and you would need to replace it. Well, if it was a bad bulb it wouldn't turn on at all, so I don't think that's the problem. However if there is any clicking noise the problem could be a week ballast, as yomutsu proposed,...

Angel

Is the menu affected by the horizontal tearing? There are three possibilities: 1. DMD board: if the menu is also affected. 2. Digital board: if the menu is not affected and the problem persists no matter what input is selected. 3. Analog board: if the menu is not affected and the problem just appear...

Angel

Well you can try these following options: Resetting your Samsung DLP Lamp Hour Meter / Counter This is a quick reference guide to show you how to reset your Samsung DLP TV’s lamp hour meter or hour counter. Resetting the counter is a very simple proceedure. Begin with the TV powered off. Point your...

Angel

Did you try to subsitute MENU instead of MUTE?

Angel

When your TV comes ON after the 45 blinks, does it show any picture? does it have audio?

Angel

Ok so - I replaced the bulb (got three flashing lights in front) TV still wouldnt come on - Then I posted up here and Eddie (great guy mind you!) replied he would go with the ballast because after reading all the posts I was having trouble deciding if I should be ordering ballast or colorwheel - Ed...

Angel

Your problem could only be with the input you're using. What port are you connecting to?

Angel

This TV model does not have an HDMI input. Would you know the part number for the digital board? Thanks Does it have a DVI input? Your part number is AA41-00693A: http://www.discount-merchant.com/We-provide-factory-original-parts-worldwide-p/1069321-samsung.htm or BP94-00385A: http://www.samsungpar...

Angel

Hi liquid.

It seems to be the DMD board.

Angel

Actually there is a way to know if the DMD board is malfunctioning when you have picture issues, but in your case the TV turns Off immediately. So the problem is going to be with one of the components of the board, and it's a complex task.

Angel

NEhelp, I took a cable box from my bedroom TV and attached it to the Samsung's HDMI input. Both the cable SD and HD pictures were fine -- no green flashing lines and no faint green flashing checkerboard. So, would you say that I have a defective analog board or digital board? Thanks, John Then the ...

Angel

You're absolutely correct when it came to the switch! For whatever reason, after being screwed in, the panel didn't want to fully trip the switch...a small piece of electrical tape did the trick. Thanks "NEhelp"; not just for my post, but for all others you'd help (while researching my pr...

Angel

Well, according to your manual (which you can check here: http://fixyourdlp.com/blog/manuals/Samsung/a0fab209b32eed9f9407e8137b3588.pdf ) the flashing code you have means that the lamp door isn't properly closed. However your lamp is turning on, so I guess the problem could be in the DMD board, whic...

Angel

mmm... I'm not sure, maybe control board.

Angel

I've just seen the video and it seems like a defective color wheel for me.

Great video BTW...

Angel

You need to begin with the TV powered off, step by step instructions here:

Hope this helps.

Angel

Angel

Hi lazorbeam. If you can see the bulb is on, but you have no picture at all, then most probably the problem is with the DMD board, it should redirect the light to the screen if everything is ok. Another possibility is that DMD board could be detecting a problem somewhere, maybe the color wheel start...

Angel

It seems like the problem is the video board, does this problem affect the menu? does it happen with all the inputs?

Angel

Hi motomoto.

I think the problem could be in the video board which is the controller of the TV functions (menu, volume adjust, etc.)

Hope this helps.

Angel

Vacuum all the dust inside the TV, just to discard the cheaper possible solution.

Does the menu looks also dark?

Angel

Seems like a DMD board issue to me. If it was the ballast that wouldn't explain why the pictures freezes and the delay when turning the TV off.

Angel

Hi fillmore85.

Could you post some pictures? So we can get an idea on how the shadow looks like.

Angel

Have you tried the HDMI input? If the problem persists when using this input then the digital video board is going to be the responsible part.

Angel

Did you reset the lamp timer?
Do you have the back door closed properly?

Angel

Yup, I cleaned out the dust. I tried a fan. Now what's happening is this: When I press the power button, the lamp no longer turns on. I just hear a whizzing noise like a fan starting up, then after a few seconds, a sound like it's shutting down (kinda like a circular saw), then it will try starting...

Angel

Did you try vacuuming all the dust from the inside? Try also putting a fan behind the TV, maybe it's just an overheating issue and since this is the cheaper solution lets try this first. If this doesn't solve the problem there are 3 options: 1. Ballast. 2. Color wheel. 3. Powe supply (not very commo...

Angel

Hi woopsay. I definitely agree with you, the problem is not the bulb since you're able to see the picture 5 or 10 minutes after TV was turned on. I've never heard about a problem like yours. I think the problem is your DMD board, however there is a way to test it. Before the picture appears try to d...

Angel

Hi Orlando.

I agree with woopsay, it seems to be just your color wheel, however you said the lamp went out as well, so all you need is lamp + color wheel.

Hope this helps.

Angel

My Samsung DLP TV HLN5065W1X/XXA got real dark and I replaced the lamp (lamp had more than 8600 hrs). After I replaced the lamp, I have audio but not video. I am able to see the menu screens but no picture. The TV is out of warranty. The TV repairman says that it is the light engine and it's too ex...

Angel

If using the HDMI / DVI input the problem still there, then the digital board is malfunctioning, else the problem is in the analog.

Angel

I think it should work, actually your TV could use more than two different part numbers, I.E. samsungparts has the BP94-01859F listed for your TV, but since currently are out of stock they're now using the BP96-02168A: http://www.samsungparts.com/part_detail.asp?oldpart=BP94-01859F&catalog_name=...

Angel

I think the problem could be with the ballas. Do you hear a clicking noise when trying to turn the TV on?

Angel

Hi Joker (nice nickname) The noise you described is usually produced by the color wheel, and for the symptoms your daughter experimented I think that's the problem. However there is a possibility you need both the color wheel and the lamp, since the lamp has a life span and your tv is 6 years old. H...

Angel

Angel

Actually there is no replacement guide for the digital board. Maybe someone who has done this task successfully can help you. I'll make a guide once I get a Samsung DLP ;)

Angel

Samsung HLR5667WAX just got Green Vertical lines almost looks like checkerboard with purple squares. The Menu and picture in picture is not affected . When I change cable box to High Definition channels the picture is good. TV is 2 1/2 yrs old. I have downloaded the service manual and checked if th...

Angel

dlanierjr. As you said the DMD and digital boards seem to be OK, since this problem just happen with analog inputs the problem is most probably with the analog board, if the digital board was bad you wouldn't be able to watch anything but the menu, unless your problem was intermittent . Hope this h...

Angel

Well, if your service manual says so and it's a cheaper option, I'd go for it. Believe me, service manuals are a useful tool.

Let us know how it goes :)

Angel

TV Ninja you are the man! TV works fine and the fix was easy. The part was $100 with shipping and the repair manual cost $20 to download(MUST HAVE). Thank You TV Ninja. I cannot thank you enough. Yes you can, you're actually doing it. Is not very common that someone thanks us... I really appreciate...

Angel

According to samsungparts.com the part number for your model is BP94-01859F. However they are offering the BP94-01859F as a replacement since the original is discontinued by manufacturer. You might want to call samsungparts to make sure that part will work on your TV. Link to the BP94-01859F listing...

Angel

where can i buy the color wheel with the housing? there are many models or just one? what is the problem with the jumper? Here you can buy it: http://www.samsungparts.com/part_detail.asp?catalog_name=Parts+and+Accessories&product_id=BP96-00674A&search_model=SP50L3HR There is just one model....

Angel

So I opened up the back of the TV to find out exactly what lamp I might need and when doing so I decided to try the tv with the back cover off. Rigged the switch down and the TV stayed on for at least 45 min. I actually shut it off because I had to leave. Put the cover back on, tested it and sure e...

Search found 446 matches