Search found 1047 matches
- Mon Jul 14, 2014 9:51 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35018
Re: Samsung hlr4667wax/xaa
Yeah I asked for the same reason, but see if the main input board was malfunctioning the TV would still start up, it will just give you distortion, bad input, etc. I agree with your diagnostic, unfortunately getting a diagram for that Samsung will be near impossible let me see if i can find a pictur...
- Mon Jul 14, 2014 4:35 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35018
Re: Samsung hlr4667wax/xaa
Hello matts, And how awesome of a seller, you don't get many of those around ebay. the more you explain the problem the more you convince me that it might just very well be the colorwheel (I am sure the seller and yourself are using the proper BP96-00674A model for this TV). I am a little more than ...
- Fri Jul 11, 2014 11:41 pm
- Forum: Samsung Discussion
- Topic: HL-R6178W LOSES PICTURE, SOUND CONTINUES, THEN SET SHUTS OFF
- Replies: 1
- Views: 4407
Re: HL-R6178W LOSES PICTURE, SOUND CONTINUES, THEN SET SHUTS
hello! Given what you just described and my own personal experience with my Samsung DLP, when was the last time you changed the lamp?? I get this same scenario every 18 months or so and it means it is time to change the lamp. If you plan to do so soon, make sure you buy an original OEM Philips bulb ...
- Fri Jul 11, 2014 4:52 pm
- Forum: LED Televisions
- Topic: SAMSUNG LN46A650A1
- Replies: 3
- Views: 21626
Re: SAMSUNG LN46A650A1
Can I ask you what parts you replaced to get your tv going again?
- Fri Jul 11, 2014 4:51 pm
- Forum: Samsung Discussion
- Topic: Samsung HLT5075SX/XAA lamp overheating
- Replies: 6
- Views: 11291
Re: Samsung HLT5075SX/XAA lamp overheating
Hello! Thank you for the detailed explanation and video, it helps with the troubleshooting. And let me tell you this is the number 1 problem with DLP televisions, I want to say 90% of the time its the lamp and 10% the ballast, but it varies from tv model to manufacturer and condition of the set. Eit...
- Mon Jul 07, 2014 6:46 pm
- Forum: Mitsubishi Discussion
- Topic: DLP Chip Replacement in 57833 has caused a new problem
- Replies: 4
- Views: 15658
Re: DLP Chip Replacement in 57833 has caused a new problem
Hello, Silence is not golden on a forum so please forgive us for not replying to your post. Normally I would think the light tunnel or the projector lens is misaligned.. but that wouldn't explain the distortions you are describing. From what you describe It seems like not only the DLP chip was bad b...
- Mon Jul 07, 2014 5:57 pm
- Forum: Toshiba DLP Discussion
- Topic: Toshiba 62HM95 Wiring diagram
- Replies: 1
- Views: 7925
Re: Toshiba 62HM95 Wiring diagram
hello bricklin, I have searched up and down and cannot seem to find one online and Toshiba was not helpful.. The only thing I can think of is that you get a general idea of how to pull it apart and put it back together! This TV uses a "Light Engine" and is pretty much composed of: A Lamp, Ballast, C...
- Mon Jul 07, 2014 5:41 pm
- Forum: Samsung Discussion
- Topic: Resetting the Samsung DLP Lamp Counter/Hour Meter
- Replies: 47
- Views: 1979425
Re: Resetting the Samsung DLP Lamp Counter/Hour Meter
I think I responded to your message on this post:
- Mon Jul 07, 2014 5:38 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35018
Re: Samsung hlr4667wax/xaa
Hello matt, I can understand your frustration and I apologize for the late response, your replies somehow get lost in all of the posts, do not worry I put a tracker on your username! So again wow! you have replaced every major component in the TV, please correct me if I am wrong but you also replace...
- Mon Jul 07, 2014 5:31 pm
- Forum: Toshiba DLP Discussion
- Topic: Toshiba 62HM95 red light on green blinking
- Replies: 1
- Views: 8462
Re: Toshiba 62HM95 red light on green blinking
Hello, For your TV model 62HM95 I see it uses lamp code Toshiba D95-LMP. Is this the bulb you purchased? From experience I have to ask where or how much you paid for the OEM lamp. 90% of the time I am trouble shooting the lamp solves my problem! The fan might not be turning on if the lamp is not ign...
- Mon Jul 07, 2014 5:16 pm
- Forum: Mitsubishi Discussion
- Topic: WD-57833 help needed
- Replies: 1
- Views: 7435
Re: WD-57833 help needed
Hello Bluesax, Wow, I take it this was a Craigslist treasure find? its a really nice TV to get up and running for only a couple of hundred. The white dots was obviously cause and solved by the DMD chip, congratulations! There are tons of information, guides, blogs and trouble shooting wizards on thi...
- Thu Jun 26, 2014 5:52 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35018
Re: Samsung hlr4667wax/xaa
Noises, boot cycles, spark sounds, screen flashing, lamp can be seen ignited from the back...
Hope I can help.
- Thu Jun 26, 2014 12:55 am
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa
- Replies: 22
- Views: 35018
Re: Samsung hlr4667wax/xaa
hello again, it seems you have changed every component and I am assuming you double checked every connection and made sure the cover and lamp door was back in place before firing the TV up again (or attempting to).. Can you describe in detail the blinking of the lights? on some models, the amount of...
- Wed Jun 25, 2014 9:35 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Hello again! I apologize for the confusion, but I can help find the correct part # using some numbers off the board. I had suggested the part by the model number.. depending on where this was assembled this part might have changed my techs tell me. Could I trouble you with the part number off the bo...
- Thu Jun 19, 2014 12:42 am
- Forum: Samsung Discussion
- Topic: 50" Samsung DLP HLP5063w - Continuing Issue
- Replies: 3
- Views: 7004
Re: 50" Samsung DLP HLP5063w - Continuing Issue
Hello ted, It seems you fixed the coldsolder sink back into the dmd. Good job! It is very doubtful that it will fail from that again unless a fan sstops working or the tv is under hot or poor ventilated conditions.. 9 out of 10 times I ask this question it solves the problem: When was the last time ...
- Thu Jun 19, 2014 12:37 am
- Forum: LED Televisions
- Topic: SAMSUNG LN46A650A1
- Replies: 3
- Views: 21626
Re: SAMSUNG LN46A650A1
Hello! Judging by the image you posted this does seem like it can be caused by the T-CON, I thought these parts hard to find, do you mind sharing where you found them cheap? A lot of members are always on the lookout for these, especially repair centers and DIY people. Thanks in advance! Maybe some ...
- Wed Jun 18, 2014 11:50 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hello! And yay! (unfortunately I did not have any intact) Well most of the times I replace a colorwheel and move the tunnel around i get a black band.. I usually don't put all the screws in the back cover until I find that I have adjusted every part of the light engine back into its place. Sometimes...
- Thu Jun 12, 2014 4:32 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Let me see what I can find, that cable is soldered to the rpm sensor so if i find one it will be kind of a coin toss to see if the sensor works unless you can splice the new cable into your old sensor..
Well be in touch!
- Wed Jun 11, 2014 7:21 pm
- Forum: Samsung Discussion
- Topic: repair question samsung hlr5067w
- Replies: 1
- Views: 4400
Re: repair question samsung hlr5067w
Hello, Thank you for the details, makes it easier to help! I have to ask before I begin trouble shooting (solves 90% of problems around here), when was the last time you replaced the lamp and did you do so with an OEM Philips brand lamp (the same bulb installed at factory)? I note that for your TV m...
- Wed Jun 11, 2014 5:09 pm
- Forum: Samsung Discussion
- Topic: HL R6168WX/XXA - l680 61"-050809-18
- Replies: 1
- Views: 4422
Re: HL R6168WX/XXA - l680 61"-050809-18
- Wed Jun 11, 2014 4:54 pm
- Forum: Projectors
- Topic: green tone to image
- Replies: 3
- Views: 13064
Re: green tone to image
Hello Louisa, Sorry to hear that your viewing experience has been interrupted. I would, right off the bat, attribute this to a faulty colowheel. Before I jump to aimless trouble shooting, could you refresh my memory with what model projector you have (If I remember correctly this was a projector..)?...
- Wed Jun 11, 2014 4:47 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hello again! Thank you for the pics, I see nos you need the cable that goes to the rpm sensonr on the colorwheel, Samsung Parts website lists the BP96-01103A (if you could confirm that would be awesome) for your HLR6168WX/XAA. Unfortunately since it comes soldered into most I do not have any lying a...
- Thu Jun 05, 2014 12:37 am
- Forum: Samsung Discussion
- Topic: Samsung hls6187 screen yellow & blue??
- Replies: 1
- Views: 4250
Re: Samsung hls6187 screen yellow & blue??
Hello orbit, Unfortunately this looks like a bad DMD chip given your blue screen, the yellowish screen might indicate that you might have to swap out the entire DMD board. It would be hard to diagnose. Changing the DMD chip (DLP chip) alone might solve your problems, Samsung TVs are normally pretty ...
- Mon Jun 02, 2014 11:42 pm
- Forum: DLP, LCD Projection, and other RPTV
- Topic: Mitsubishi 65" DLP WD-65732 wont turn on
- Replies: 4
- Views: 22001
Re: Mitsubishi 65" DLP WD-65732 wont turn on
Hello Rammstein, I have seem this problem cause the same situations in the same order! I am not sure if on the WD-65732, but For many Mitsubishi TVs including my own. My first question, and my immediate resolution I found, was to replace the lamp with the OEM bulb and not a generic version. May I as...
- Tue May 27, 2014 5:22 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hello, Yeah thanks, just barely missed the fires I live in the southern part of SD! I can imagine how it got over there with the heat, my friend is in PX. Glad to hear you are ok. I think I can get the wire from the junkyard of parts.. can you send a picture of the colowheel? I am sorry to bother bu...
- Fri May 23, 2014 12:09 am
- Forum: Lutema Mid-Sized R/C Helicopter
- Topic: Mid-size Heli hover question
- Replies: 2
- Views: 22676
Re: Mid-size Heli hover question
Hello, I do not know much about RC helicopters, but it seems to me to either got the incorrect replacement part, or something went wrong during the install.. I was looking at the site it looks like they have warranty, maybe you should give them a call? Sorry I am not of much help my area of expertis...
- Mon May 19, 2014 6:16 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16299
Re: Samsung hlr4667wax/xaa dlp dmd board?
Hello Matt, Sorry I was out for the weekend, wow ok so then.. ..after exchanging hundreds maybe thousands of lamps, I have to say for a Samsung which is a top of the line TV like that HLR4667 I would strongly recommend going with an original Philips. This is more expensive but it is the original tha...
- Fri May 16, 2014 12:58 am
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Oh ok ok the picture is more clear now.. Let me see if I can find one lying around from any shattered colorwheels I have exchanged.. if not, have you ever purchased a bulb or ballast from www.discount-merchant.com ? I buy from there so often they normally hook me up with random cables like that, and...
- Wed May 14, 2014 9:01 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Uh-Oh! I do not think you can find the Female end on a cable set. It seems damaged beyond repair, but buying a new dmd board for a broken connector is a hard decision! Even if you get a new colorwheel you still wont be able to installing it.. do you have an image of how it came off hte dmd board to ...
- Wed May 14, 2014 4:47 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
- Wed May 14, 2014 4:46 pm
- Forum: Samsung Discussion
- Topic: Crosshatch pattern
- Replies: 1
- Views: 2596
Re: Crosshatch pattern
Hello Robear38, Sorry to hear that, to begin with you say you have a new lamp, for the Samsung HLS5687WX/XAA I see that you need a Philips lamp code BP96-01472A. More often than not, I am finding more and more problems with generic no brand bulbs! If you have that and its set, by what you describe i...
- Tue May 13, 2014 11:17 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Well it depends on what the damage is like, if you get a chance could you upload a close up of the damage? Maybe we can do some splicing!
- Tue May 13, 2014 4:50 pm
- Forum: Samsung Discussion
- Topic: Color wheel cables available anywhere for HLR6168WX/XXA?
- Replies: 33
- Views: 43996
Re: Color wheel cables available anywhere for HLR6168WX/XXA?
Hello KEENLALOU2, I hope there was no short to the DMD! But the cables are a smart place to begin with, sometimes rebuilding a wiring harness does not work for a number of reasons, one would think as long as a connection is made it would work. Sometimes the only way to make it work is to have the wi...
- Mon May 12, 2014 6:53 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16299
Re: Samsung hlr4667wax/xaa dlp dmd board?
Hello Matt, Sorry this can be frustrating I know, I fix these everyday! Yeah something did not sound.. I do not know, complete about the DMD malfunction, it was a good guess I hope you can get your money back for the DMD! When ordering a lamp just make sure you buy Philips brand lamps, those are the...
- Tue May 06, 2014 6:41 pm
- Forum: Samsung Discussion
- Topic: Samsung hlr4667wax/xaa dlp dmd board?
- Replies: 11
- Views: 16299
Re: Samsung hlr4667wax/xaa dlp dmd board?
Hello Matt, Sorry I had not stumbled upon your post! I highly doubt the DMD board has gone since the last thing to fail was the colorwheel. This means the TV was working fin until the Colorwheel shattered correct? if so I would make sure you have the correct colorwheel, which for the Samsung HLR4667...
- Mon May 05, 2014 6:59 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Hello Ajespo, Nice clear picture, is there a way I can get you to up load a picture of the from of the DMD board? I don't want you confusing it with the DV board! The front and the back of the DMD board that houses the DLP chip should look like the images I attached. Given all the things you describ...
- Mon Apr 21, 2014 7:42 pm
- Forum: Samsung Discussion
- Topic: Help me trouble shoot HL-R6178W
- Replies: 1
- Views: 3482
Re: Help me trouble shoot HL-R6178W
Hello Sanjay and welcome! Thank you for the detailed description of the TV symptoms, a couple of quick questions first: -When you say you replaced the OEM Philips lamp did you do so with the BP96-01415A for Samsung HL-R6178W ? There are many generic bulb sellers that try to pass them off as original...
- Wed Apr 09, 2014 4:37 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Good luck!
- Thu Apr 03, 2014 7:55 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Hello, Well I assume the real reason I jumped to the Chip as opposed to the entire Board was from experience. The part of the DMD board to always malfunction is most often the DLP Chip, and since putting extra ventilation on it worked, it made sense it would give out at any point.. Another thing I j...
- Thu Apr 03, 2014 12:10 am
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Hello, Yes the DMD is the same as DLP Chip behind the heatsink it looks like the one on the link below. If I can assume the manufacture date was around January 2004, the part number would be 4719-001997. http://www.discount-merchant.com/p-146847-mitsubishi-samsung-toshiba-4719-001997-dmd-dlp-chip.as...
- Wed Apr 02, 2014 6:00 pm
- Forum: Projectors
- Topic: distored imageon screen
- Replies: 3
- Views: 10996
Re: distored imageon screen
Hello Louisa, Well lets keep in mind that keystone correction is there to adjust the image by skewing it in a "trapazoidal" way (if it makes sense). The only reason you would want to apply manual correction is if your projector is not exactly perpendicular to your screen. If it is pointed down/up at...
- Tue Apr 01, 2014 6:04 pm
- Forum: Projectors
- Topic: distored imageon screen
- Replies: 3
- Views: 10996
Re: distored imageon screen
Hello Louisa, I can imagine, I sat though an entire Super Bowl once for the fear of making it worse! Can you tell me what your Projector model is? I want to take a look at the manual and see what kind of keystone adjustment it has. The link below has a short article about this and explains how impor...
- Tue Apr 01, 2014 5:45 pm
- Forum: Samsung Discussion
- Topic: Samsung HLP6163 Light Engine/ DMD
- Replies: 19
- Views: 27417
Re: Samsung HLP6163 Light Engine/ DMD
Hello, that sounds like great trouble shooting, I think I can help out with two aspects. One would be the bulb you replaced, did you replace it with an OEM BP96-00826A Philips lamp? I do not think what you describe to require the entire DMD board replacement, I think a brand new DMD Chip will fix yo...
- Tue Mar 25, 2014 6:05 pm
- Forum: Projectors
- Topic: Planar pd7010 problem
- Replies: 9
- Views: 14976
Re: Planar pd7010 problem
Hello! Thats not good. I would lean more towards a capacitor, unless you had any visual distortion (like spots on the screen) or erratic behavior.. The DMD chip or DMD board hardly ceases to function it mostly causes disruption when gone bad in my personal experience. It is a COLD day in California ...
- Thu Mar 20, 2014 7:05 pm
- Forum: Projectors
- Topic: Planar pd7010 problem
- Replies: 9
- Views: 14976
Re: Planar pd7010 problem
Hello, Very welcome I am intrigued as to what is the source of this issue! hmm so the clicking is originating from a relay on the line input brd.. I have no idea! The scr you mention going out of the psu, let me know what you find from testing it tonight. Good luck with the TOP244YN. btw, I love the...
- Wed Mar 19, 2014 5:26 pm
- Forum: Projectors
- Topic: Planar pd7010 problem
- Replies: 9
- Views: 14976
Re: Planar pd7010 problem
Hello! Retired from a large company, congrats! Well it sounds like you are more than knowledgeable about what you are doing. I can see how replacing a converter might fix the issue of the fans and color wheel not jumping on while the unit boots up. Do they never come on at all, or are they halted wh...
- Tue Mar 18, 2014 7:36 pm
- Forum: Game Systems
- Topic: Sony Playstation 4
- Replies: 0
- Views: 24093
Sony Playstation 4
- Mon Mar 17, 2014 8:00 pm
- Forum: Projectors
- Topic: Planar pd7010 problem
- Replies: 9
- Views: 14976
Re: Planar pd7010 problem
Hello, Wow ok so it seems you have all the tools and experience, what area of electronics do you work in? I think if Planar themselves did not share the schem's they will be near impossible to find... Did you test the ballast and the bulb? The ballast returns gain amount to the PSU so if anything is...
- Thu Mar 13, 2014 5:36 pm
- Forum: Projectors
- Topic: Planar pd7010 problem
- Replies: 9
- Views: 14976
Re: Planar pd7010 problem
Hello, I did a little bit of research and I cannot find a Planar PD7010 schematic for the power supply. I will keep looking, but the readout you are getting can be a regulation from the ballast caused by a malfunctioning ballast or even as simple as a bad lamp. How long have you had this unit and wh...
- Mon Mar 10, 2014 6:20 pm
- Forum: Samsung Discussion
- Topic: Samsung HLT6187S screen black
- Replies: 6
- Views: 17611
Re: Samsung HLT6187S screen black
Hello PDOM, You must have a newer version of this same model, when I first looked it up I found regular UHP Philips lamps for it, I did not find anything about LED's I apologize. http://www.samsung.com/us/support/owners/product/HL-T6187S http://www.samsungparts.com/lampadvisor.html There is a guy at...