Search found 286 matches

by Jason1976
Wed Jan 13, 2010 1:51 pm
Forum: Samsung Discussion
Topic: Re-Flowed DMB But it Didn't Work, What Now?
Replies: 3
Views: 5370

Re: Re-Flowed DMB But it Didn't Work, What Now?

sounds like the reflow didn't work for you. you should contact the reflow person and see if they will reflow it again or you. if that doesn't work you will need a replacement digital board. The guy does offer to refund 50 of the 75 if it isn't repairable. look the part up on http://www.samsungparts....
by Jason1976
Wed Jan 13, 2010 1:48 pm
Forum: Samsung Discussion
Topic: big paperweight?
Replies: 6
Views: 6999

Re: big paperweight?

Check to make sure the ribbon cable is pushed in the currect way. Also make sure the wires are tight and you didn't miss plugging anything back in. Thats the only things i can think of. If all else fails try the old color wheel to see if it comes back to life. You could of bought a bad color wheel.
by Jason1976
Wed Jan 13, 2010 1:45 pm
Forum: Samsung Discussion
Topic: average life of a DLP lamp
Replies: 1
Views: 3385

Re: average life of a DLP lamp

thats good for a lamp. they say phillips lamps last longer. it's also cost less if you get a bare lamp and use your old housing.
by Jason1976
Wed Jan 13, 2010 1:44 pm
Forum: Samsung Discussion
Topic: HLN5065W1X- Heard pop then screen red
Replies: 1
Views: 3257

Re: HLN5065W1X- Heard pop then screen red

sounds like the color wheel broke and then was stopped on the red color. if the color wheel isn't spinning the tv will turn off. Also if the color wheel is broken the tv wont power up and that could be why you are getting the 3 lights.
by Jason1976
Wed Jan 13, 2010 1:42 pm
Forum: Samsung Discussion
Topic: HLR 56x 1080p model, all three lights blink
Replies: 3
Views: 4948

Re: HLR 56x 1080p model, all three lights blink

It's hard to say without being there to see whats going on and to test parts. I am thinking you will need a tech to look at it.
by Jason1976
Wed Jan 13, 2010 1:40 pm
Forum: Samsung Discussion
Topic: SP-50L7HX Lamp & Blast Board Part Numbers
Replies: 1
Views: 3287

Re: SP-50L7HX Lamp & Blast Board Part Numbers

go to www.samsungparts.com and look up the part numbers from your model number.
by Jason1976
Wed Jan 13, 2010 1:39 pm
Forum: Samsung Discussion
Topic: white dots
Replies: 3
Views: 6003

Re: white dots

Depending on the kind of white dots your talking about samsung is repairing the issue for free. please check out
http://forums.cnet.com/5208-13973_102-0 ... dID=366380

Not sure if it's the same issue you are having but contact samsung to find out. people say the repair is 100% free.
by Jason1976
Sat Jan 09, 2010 4:30 am
Forum: RCA Discussion
Topic: HD44LPW62 off-center picture
Replies: 2
Views: 6974

Re: HD44LPW62 off-center picture

oh i forgot to say you should be able to ajust it also in the service menu. but i am not sure how to access the service menu on an RCA since I don't normaly work on RCA. I am used to samsung.
by Jason1976
Sat Jan 09, 2010 4:28 am
Forum: RCA Discussion
Topic: HD44LPW62 off-center picture
Replies: 2
Views: 6974

Re: HD44LPW62 off-center picture

to me it sounds like the dmd board isn't alined currectly. need to loose the screws in it and move it slowly ether use a mirror to look into or have someone in front of the tv to tell you if it gets better or worse. well since it was fixed under warranty and the repair shop messed it up. call RCA an...
by Jason1976
Fri Jan 08, 2010 10:18 pm
Forum: Samsung Discussion
Topic: HLR 56x 1080p model, all three lights blink
Replies: 3
Views: 4948

Re: HLR 56x 1080p model, all three lights blink

first off do you hear your color wheel spin? if it doesn't spin your lamp wont come on, kind of sounds like a cd as it spins up. If it's spinning then start with the lamp and if that isnt it then try the ballast. also the color wheel shouldn't make to much noise.
by Jason1976
Fri Jan 08, 2010 3:24 am
Forum: Toshiba DLP Discussion
Topic: Vertical lines on DLP screen
Replies: 4
Views: 9024

Re: Vertical lines on DLP screen

there are 3 fans in most dlp tv's clean them all.
by Jason1976
Fri Jan 08, 2010 3:22 am
Forum: Samsung Discussion
Topic: Samsung 67inch DLP color went out
Replies: 5
Views: 6832

Re: Samsung 67inch DLP color went out

your welcome.
by Jason1976
Thu Jan 07, 2010 12:58 am
Forum: Toshiba DLP Discussion
Topic: Toshiba 52Hm94 digital board
Replies: 2
Views: 5141

Re: Toshiba 52Hm94 digital board

I think this is it but 0 in stock. also keep an eye on ebay.

http://www.discount-merchant.com/TOSHIB ... 158885.htm
by Jason1976
Thu Jan 07, 2010 12:55 am
Forum: Toshiba DLP Discussion
Topic: Toshiba 42HM66 has green and purple hazing effect
Replies: 2
Views: 7339

Re: Toshiba 42HM66 has green and purple hazing effect

ok it may have something to do with the kind and brand of lamp you have. I am not sure how to access the service menu in a toshiba. but i know samsung has an area were you can pick the kind and watts of your lamp.
by Jason1976
Thu Jan 07, 2010 12:53 am
Forum: Toshiba DLP Discussion
Topic: Vertical lines on DLP screen
Replies: 4
Views: 9024

Re: Vertical lines on DLP screen

ok if t lines show up on the menus also then I would say it's the dmd board. you may want to open it up and clean out the fans. the dmd chip cools with a fan and if it's to dirty to maybe over heating and making errors. but i think its freaky it happen when it first turned on but cleaning them never...
by Jason1976
Thu Jan 07, 2010 12:47 am
Forum: Mitsubishi Discussion
Topic: WD-65733 Problem with white dots on screen
Replies: 2
Views: 6137

Re: WD-65733 Problem with white dots on screen

It's an issue with the dmd chip with the LCD. I know samsung is fixing this issue for free but I am not sure if Mitsubishi is doing anything about it. You should call and find out.
by Jason1976
Wed Jan 06, 2010 5:34 pm
Forum: Samsung Discussion
Topic: HLR5067WAX AV and s video jacks not working
Replies: 2
Views: 4131

Re: HLR5067WAX AV and s video jacks not working

oh I forgot to say the one board isn't listed on that reflow ebay listing but it works also for part number BP94-02084A, BP94-02084A is a replacement board for the other board numbers. my hlr5067wax/xaa has the BP-02084A. I am the one that tracked it down to the dnie chip on the digital board. if yo...
by Jason1976
Wed Jan 06, 2010 5:26 pm
Forum: Samsung Discussion
Topic: Samsung 67inch DLP color went out
Replies: 5
Views: 6832

Re: Samsung 67inch DLP color went out

yes it would. it sends a signel to the ballast that makes the lamp turn on. if it's not spinning right then the singel isn't right and it will turn off.
by Jason1976
Wed Jan 06, 2010 5:11 pm
Forum: Samsung Discussion
Topic: turns on and off by itself
Replies: 3
Views: 5361

Re: turns on and off by itself

I would start off with the lamp. then try a ballast. if you are handy also check to make sure there are no bad solder joints on the ballast. the 3rd thing i would try is the power supply. I also want to ask. do you hear the color wheel spinning up? that could be the issue also if you dont hear it. b...
by Jason1976
Wed Jan 06, 2010 12:33 pm
Forum: Samsung Discussion
Topic: DMD Board? Something else?
Replies: 1
Views: 3446

Re: DMD Board? Something else?

I am thinking it could be the digital board. since it controls most of the tv. that or it could be the analog board. but i would start with the digital board.
by Jason1976
Wed Jan 06, 2010 12:27 pm
Forum: Samsung Discussion
Topic: Samsung 67inch DLP color went out
Replies: 5
Views: 6832

Re: Samsung 67inch DLP color went out

I am thinking your color wheel broke. it maybe still spinning and thats why the tv still comes on. if you are handy you can open it up and replace the color wheel. look up the part number on http://www.samsungparts.com and then check out http://www.discount-merchant.com/?Click=38489 for the part num...
by Jason1976
Wed Jan 06, 2010 12:25 pm
Forum: Samsung Discussion
Topic: Cant figure out my problem maybe u can help
Replies: 2
Views: 3984

Re: Cant figure out my problem maybe u can help

well it may not really be the same issue but I think it's in your light tunnel. maybe your mirrors are sagging in the middle.
by Jason1976
Wed Jan 06, 2010 12:24 pm
Forum: Samsung Discussion
Topic: Cant figure out my problem maybe u can help
Replies: 2
Views: 3984

Re: Cant figure out my problem maybe u can help

to me it sounds like the mirrors are coming loose in the light tunnel. samsung was fixing this issue for free. “Samsung is addressing the light tunnel “border-shadow” effect that impacted a small percentage of select 2005 and 2006 model year DLP TVs. Customers who own a Samsung HLR or HLS model year...
by Jason1976
Wed Jan 06, 2010 12:15 pm
Forum: Samsung Discussion
Topic: HLR5067WAX AV and s video jacks not working
Replies: 2
Views: 4131

Re: HLR5067WAX AV and s video jacks not working

If you look in the past others have had this same issue. It's the digital board. if you know how to remove the board. you can send it in to a guy to have the solder reflowed. or if you don't trust his repair the board can be bought from http://www.samsungparts.com http://cgi.ebay.com/ws/eBayISAPI.dl...
by Jason1976
Mon Jan 04, 2010 4:46 pm
Forum: Samsung Discussion
Topic: Samsung dlp- no pic/sound- new bulb- HELP!
Replies: 5
Views: 9318

Re: Samsung dlp- no pic/sound- new bulb- HELP!

if the lamp is coming on but has no video and you have sound I would say it's the dmd board.
by Jason1976
Mon Jan 04, 2010 4:44 pm
Forum: Samsung Discussion
Topic: Samsung Ballast/Lamp upgrade question
Replies: 1
Views: 3171

Re: Samsung Ballast/Lamp upgrade question

This is a question I don't know about. you may want to ask on http://www.hometheatershack.com/forums/samsung/
by Jason1976
Mon Jan 04, 2010 2:38 pm
Forum: Samsung Discussion
Topic: Green Rectangles on Bottom Half of Screen
Replies: 3
Views: 3922

Re: Green Rectangles on Bottom Half of Screen

If it doesn't show up in the menu then I would say a bad digital board. If you can see it in the menu. I would say a bad dmd board.
by Jason1976
Sun Jan 03, 2010 11:43 pm
Forum: Samsung Discussion
Topic: Aging Pattern/Service Menu HL-P6163W
Replies: 1
Views: 3499

Re: Aging Pattern/Service Menu HL-P6163W

I am totaly lost of this one. go to http://www.hometheatershack.com/forums/samsung/ and ask on there. There are other techs on there that may know more about this issue then I do.
by Jason1976
Sun Jan 03, 2010 11:41 pm
Forum: Samsung Discussion
Topic: Replacement lamp for Samsung SP50L6HX
Replies: 1
Views: 2492

Re: Replacement lamp for Samsung SP50L6HX

first off go to http://www.samsungparts.com and check your model number for the lamp. make sure it's the right lamp. Also take your lamp out and make sure it's not full of dust. you can use compressed air to blow it out. I had one that the inside of the glass was dirty. I used a damp q tip to clean ...
by Jason1976
Sun Jan 03, 2010 11:35 pm
Forum: Samsung Discussion
Topic: HLN437W No component signals after color wheel rep
Replies: 2
Views: 2337

Re: HLN437W No component signals after color wheel rep

Glad you found out what was wrong. I had no idea on this one. I have the same tv in my bedroom. I picked it up for free. It had issues of turning off at random times when I picked it up. It just had bad solder joint issues in the power supply. I was lost why you lost signals after color wheel replac...
by Jason1976
Sun Jan 03, 2010 11:32 pm
Forum: Samsung Discussion
Topic: HLN5065W Problems...
Replies: 7
Views: 5083

Re: HLN5065W Problems...

cool. Let us know how it works. Your old light engine has a color wheel and other parts in it. You may want to keep it for extra parts.
by Jason1976
Sun Jan 03, 2010 11:30 pm
Forum: Samsung Discussion
Topic: Samsung HL-S4266W Picture freeze-up
Replies: 1
Views: 2028

Re: Samsung HL-S4266W Picture freeze-up

I am leaning more in the lines of a bad digital board or dmd board. also open up the tv and clean all the fans with compressed air. see if this helps. Normaly loss of control is from a bad digital board. also does this happen on all inputs. try inputs like the vga computer hookup. digital boards are...
by Jason1976
Sun Jan 03, 2010 11:26 pm
Forum: Samsung Discussion
Topic: Testing parts before ordering
Replies: 1
Views: 3066

Re: Testing parts before ordering

Check for bad solder joints on the power supply and ballast. Resolder them if you are handy. If you are not that handy order replacement boards.
by Jason1976
Sun Jan 03, 2010 11:24 pm
Forum: Samsung Discussion
Topic: Green Rectangles on Bottom Half of Screen
Replies: 3
Views: 3922

Re: Green Rectangles on Bottom Half of Screen

First off we need some more info.

Model number.
does it happen on all inputs or just some inputs. A photo of the issue would help
by Jason1976
Sun Jan 03, 2010 1:00 pm
Forum: Samsung Discussion
Topic: HL50A650 Lamp, Ballast, or Color Wheel?
Replies: 1
Views: 2291

Re: HL50A650 Lamp, Ballast, or Color Wheel?

what kind of lamp did you buy? osram, phillips?

Many sellers are substituting inferior generic lamps (marketed as OEM compatible, 100% Compatible Replacement, or compatible replacement lamp)

Just watch out. The cheap ones dont last as long. phillips last the longest.
by Jason1976
Sun Jan 03, 2010 5:59 am
Forum: Samsung Discussion
Topic: HL-P5063 shuts off -standby/temp light on constant
Replies: 3
Views: 5853

Re: HL-P5063 shuts off -standby/temp light on constant

I had issues with one of these! some times it would work for 2 hours sometimes it would work for 5 or so on and then shut off and here it had bad solder joints in the power supply. If you don't know anything about soldering then you may want to try a new power supply. The power supply on this model ...
by Jason1976
Sun Jan 03, 2010 5:57 am
Forum: Samsung Discussion
Topic: Three Lights flashing HLP6163W
Replies: 2
Views: 3074

Re: Three Lights flashing HLP6163W

Bad lamps can do his it also could be a bad ballast. The lamps are filled with gas as the gas heats up the wires inside maybe lose loosing contact. You always try a new lamp first. If that doesn't do it then ether a ballast or a power supply issue.
by Jason1976
Sun Jan 03, 2010 5:52 am
Forum: Samsung Discussion
Topic: New lamp worked for 4 hours then blew.
Replies: 6
Views: 6951

Re: New lamp worked for 4 hours then blew.

hrm. did the lamp blow again? did you set hte kind of lamp you have in the service menu? you can also set the watts and all of that in the service menu. were did you buy the lamp? also make sure the fans are working in case the lamps are over heating.
by Jason1976
Sun Jan 03, 2010 5:50 am
Forum: Samsung Discussion
Topic: DMD Board Replacement - HL-P6163W
Replies: 7
Views: 9547

Re: DMD Board Replacement - HL-P6163W

I have no idea on that one. sounds like one of the boards but it could be any of them.
by Jason1976
Sun Jan 03, 2010 5:47 am
Forum: Samsung Discussion
Topic: HLR5067 turns off
Replies: 1
Views: 2051

Re: HLR5067 turns off

it could be many issues. this model is known to have issues with the digital board but your issue doesn't sound like a digital board. could be in the ballast. you may want to go into the service menu and reset the lamp hours.
by Jason1976
Sun Jan 03, 2010 5:42 am
Forum: Samsung Discussion
Topic: hlr6167 shuts off
Replies: 2
Views: 4363

Re: hlr6167 shuts off

I would say it's most likely the ballast. The 3 blinking lights also could be a lamp. You may want to try a new lamp if the lamp is older since they are to be good for about 9,000 hours. You can check lamp hours under the service menu. With the tv off press mute 1 8 2 power on the remote and its und...
by Jason1976
Sat Dec 26, 2009 12:46 am
Forum: Samsung Discussion
Topic: Need some help
Replies: 3
Views: 4777

Re: Need some help

you are welcome. read the post from what they are saying you can talk to one person and they wont give the repair for free but then you call back talk to someone else and then they know about the issue and offer the free repair. they also said it depend on how you word it.
by Jason1976
Sat Dec 26, 2009 12:45 am
Forum: Samsung Discussion
Topic: New color wheel lasted only 30 days
Replies: 1
Views: 1920

Re: New color wheel lasted only 30 days

you need to check the housing that the color wheel goes into. make sure nothing is worped and that it isn't rubbing anything. if everything checks out you could of just bought a bad color wheel. did you buy it new or was it a used color wheel? if it was used it may of had issues when you bought it. ...
by Jason1976
Fri Dec 25, 2009 7:19 pm
Forum: Samsung Discussion
Topic: HL-T4675S dead?
Replies: 2
Views: 3870

Re: HL-T4675S dead?

color wheel may of stopped turning. so it could be that. a bad lamp will cut out. a lamp can also make the 3 flashing lights. "I dont think it would be the dmd board. The video can go out with that but the tv stays on with sound but no video."
by Jason1976
Fri Dec 25, 2009 7:16 pm
Forum: Samsung Discussion
Topic: Samsung HLP 5063WX - Sound crackles from analog in
Replies: 2
Views: 2486

Re: Samsung HLP 5063WX - Sound crackles from analog in

I am guessing it's a bad analog board. you can replace the board.
by Jason1976
Fri Dec 25, 2009 7:14 pm
Forum: Samsung Discussion
Topic: HLN5065W Problems...
Replies: 7
Views: 5083

Re: HLN5065W Problems...

thats not a color wheel issue. ether a dmd board or a digital board issue. I am guessng more likely the dmd board.
by Jason1976
Fri Dec 25, 2009 7:13 pm
Forum: Samsung Discussion
Topic: TV Turns On Then Off After 15 Seconds...
Replies: 2
Views: 2556

Re: TV Turns On Then Off After 15 Seconds...

it could be the ballast or a power supply issue. one of the other. but also a bad lamp can make this happen.
by Jason1976
Fri Dec 25, 2009 7:12 pm
Forum: Samsung Discussion
Topic: Samsung dlp- no pic/sound- new bulb- HELP!
Replies: 5
Views: 9318

Re: Samsung dlp- no pic/sound- new bulb- HELP!

sounds like a digital board issue for the one that the lamp keeps flashing. there is an issue with the dnie chip solder braking. A solder reflow may fix it. please go here and look at the long thread.


http://www.hometheatershack.com/forums/samsung
by Jason1976
Fri Dec 25, 2009 7:10 pm
Forum: Samsung Discussion
Topic: HLM507W lamp and color wheel won't start
Replies: 2
Views: 4437

Re: HLM507W lamp and color wheel won't start

I would say it' the color wheel or the dmd board since it controls the color wheel.
by Jason1976
Fri Dec 25, 2009 7:08 pm
Forum: Samsung Discussion
Topic: HL-R5667WAX/XAA
Replies: 8
Views: 9038

Re: HL-R5667WAX/XAA

it looks like the jack on the back of a computer that you hook a computer monitor too. you need a cable for it. it would be the pc jack

Go to advanced search