FixYourDLP.com Forums

Jason1976

what we found out this issue is the digital board. the solder needs reflowed. this guy does it and charges $40 http://jdelectronicsinc.com/

Jason1976

the power supplies in these are know to have cold solder joints. and they will give you this issue. the power supply is behind the analog board.

Jason1976

you should go into the service menu and reset the lamp hours. mute 1 8 2 power on the remote. It will also give you an idea of how many hours of use the tv has if the lady never reset it.

Jason1976

it could be many things. do you still have the old lamp? you may want to try that to see if it's the lamp. some lamps yo have to enter the service mode and change some settings. with tv turned off press on the remote mute 1 8 2 power. but you said the remote isn't working. check to make sure when yo...

Jason1976

I have an hlr5067w I will check my settings. the tv's are almost the same but not the same. I think you can set up what kind of dmd board you have. I need to check and get back to you what you have to change. I was playing with the settings of mine before and it turned blue but i cant remember what ...

Jason1976

It maybe one of the settings. you maybe able to copy settings from the light engine. but not sure about your model. I know some things but not all. you may have to pick what kind of lamp you are using and things like that. if your board still powered on your set it would of been good to of copied do...

Jason1976

most likely the color wheel. also could be one of the boards. a bad capasitor.

Jason1976

sure they can go bad.

Jason1976

just an fyi . these sets are known to have digital board issues. most of the time the solder needs reflowed in the digital board. most repair shops just switch out the board. check out this forum. http://www.hometheatershack.com/forums/samsung/20791-hlr6167wax-xaa-digital-board-problems.html your hl...

Jason1976

most likely the balast. normal if its the color wheel they make all kinds of sounds and you never would of got it up and working again. if you are handy check for bad solder joints in the balast. also check ebay for a used one you maybe able to save money. also check www.samsungparts.com

Jason1976

part number is bp94-02084A and it is the board that has the hdmi jack on the back of your tv. it's in a metal case. it also has the two screw on cable/ant jacks.

Jason1976

press mute 1 8 2 power when the tv is off. it will bring up the service menu. one of the options is to flip the video.

Jason1976

when it goes black look at the back of your tv. see if the lamp is still on. I am guessing it could be the digital board. please check out our post on http://www.hometheatershack.com/forums/samsung/20791-hlr6167wax-xaa-digital-board-problems-7.html these are known to have digital board issues. if it...

Jason1976

digital board issue. the BGA chips need the solder reflowed. give him this info. http://jdelectronicsinc.com/ the cost is $40 or it needs a new digital board. and the board is $188 after you send in the old one for a core charge from samsungparts.com please check out our talks of this issue here htt...

Jason1976

well the board isn't hard to open. you have to remove the screws. loosen the nuts around were the cable screws in. and you have to remove the bolt/screws for vga and dvdi. then the case comes right off. we found a guy to reflow the solder and it should fix your issue. http://jdelectronicsinc.com/ wh...

Jason1976

digital board issue. not sure if a reflow will work for this issue or not. board can be bought from www.samsungparts.com

Jason1976

most likely the digital board. we have seen this issue before. we found a guy to reflow the solder and he charges 40 dollars and that normaly fixes the issue. http://jdelectronicsinc.com/

Jason1976

it's the digital board. please check out http://www.hometheatershack.com/forums/samsung/20791-hlr6167wax-xaa-digital-board-problems-7.html for the fix. we found a guy to reflow the solder on the digital board for 40 dollars. after the reflow no more issues. please look at page 6 or 7 here is the ref...

Jason1976

check out http://www.hometheatershack.com/forums/ ... ems-7.html we found the issue on the digital board is some of the chips need the solder reflowed. the guy charges 40 dollars.

Jason1976

digital board issue. please check out http://www.hometheatershack.com/forums/ ... ems-7.html we found a fix for this. you can send the board in to have the solder reflowed it cost around 40 dollars. digital board is part number bp94-02084A

Jason1976

have the tv off then with the remote press mute 1 8 2 power. you can flip the screen in the service menu.

Jason1976

digital board issue. please check out http://www.hometheatershack.com/forums/ ... ems-7.html since it uses the same digital board.

Jason1976

I also belong to http://www.hometheatershack.com we have been working on this issue for some time. we found out the solder needs reflowed on the digital board for some issues. please check out http://www.hometheatershack.com/forums/samsung/20791-hlr6167wax-xaa-digital-board-problems.html for info. t...

Jason1976

you could check on ebay for a color wheel to see if they have a lower price. you maybe better off to remove the color wheel and go by the part number.

you can also check the number on your lamp and dmd board to find out what one you have. and match the numbers on on the samsungparts.com web page

Jason1976

well i didnt solder it. I just make sure it fit against the top cover tight so it wouldnt move. I used an heat sink i had laying around and a soda cap off a 20 oz soda. it made a tight fit. at first i used foil over the heat sink but I was afraid it would short out. I did find one place that shows t...

Jason1976

Dear NEhelp, Thanks for all of the advice. I intend to order an analog board -- BP94-02049E -- probably from Samsungparts.com. Because of my travel schedule, it might be several weeks before I can order, receive and install the board. But I'll report back to the forum when I finish the replacement....

Jason1976

Thanks for the reply. I was not able to try alternate inputs, since the TV is unresponsive to button presses. There was nothing visually wrong with any capacitors, connectors, or anything else on all the PCBs I examined (both digital and analog boards). Thanks again! First of all I do not beleave i...

Jason1976

and about to buy a new tv :x !!! Which I really don't want to do because this one is only 3 years old. Anyway I can not seem to find anyone with the same problem online though I am sure it is out there. About 3 months ago one day the screen just started having green lines all over it. I have attach...

Jason1976

What I dont get is that the tv runs a signal through the analog board then the digital board and then the dmd board. Once there a picture is displayed on the screen. So if the digital inputs work fine wouldnt that rule out the digital and dmd board, leaving the problem at the analog board. I worked...

Jason1976

it's most likely the digital board. the digital board puts out an dvi cable that goes into the dmd board. think of the dmd board as being a computer monitor. and the digital board as being a computer video card. if your tv is a model HL-R6167W this is a comon issues. I posted a fix for the HL-R5067W...

Jason1976

again check out my fix for the digital board in the forum for the hlr5067w it used the same digital board as your hlr5667w. what happens is the one chip inside gets broken solder joints and it needs to be pushed down to make good contact. you could cut a peace of wood or use something eles to push i...

Jason1976

the digital board can also cause this. look at the fix for the HRL5067w from what I am reading the hrl5667wax used the same digital board as the HRL5067wax/xaa. if you dont want to try the digital board. you can buy it from http://www.ued.net/ued/addItems.do?itemCode=SSGBP94-02084A make sure the par...

Jason1976

after the tv worked I opened it back up and took the photos. I added the heat sink to make sure the foil didn't short out the digital board.

Jason1976

most likely the digital board with the hdmi jack. check out the post I just put up. I found a way to fix the board without replacing it.

Jason1976

sounds like the digital board. I had the same issue. I posted a fix on the forum.

Jason1976

when you take the cover off the digital board you see a chip close to the dvi output on the board. with my tv I put a ball of foil on there making sure it doesn't short out against anything eles. it has to be big enough so when you push the case back on it cashes down iand t sqeezes the chip down. (...

FixYourDLP.com Forums

Search found 286 matches

Re: HLR 4667wax no picture

Re: Samsung HLN467WX/XAA Unique No Power Problem

Re: Samsung HLN617WX/Xaa will not power on

Re: hlp5063w wont turn on right away

Re: picture is upside down???

Re: picture is upside down???

Re: SAMSUNG HLR5067W Oscillating Noise Mystery

Re: New lamp worked for 4 hours then blew.

Re: HLR4667W No picture, but sound.......fixed for now

Re: New lamp worked for 4 hours then blew.

Re: HLR5067WAX

Re: HLR6167WX/XAA, Backward picture

Re: hlr4667 screen goes black

Re: HLR5067WAX

Re: Samsung HLR5667W - Cycling on and off

Re: Samsung DLP model HLR4667WX/XAA HELP PLEASE!

Re: HLR6167W Problems when power is lost

Re: Samsung DLP HLR5067W - Green checkerboard

Re: HLR5667WAX Green Vertical Lines/ analog or digital

Re: Samsung HLR5667W Turns on 3 secs,Freezes & reboots

Re: picture is upside down???

Re: HLR4667W Picture freezes, then goes black

digital board hlr4667w hlr5067w hlr5667w hlr6167

Re: L6 chassis or L3 chassis

Re: HL-R5067W Digital Board & Parts Confusion

Re: HL-R5067W Digital Board & Parts Confusion

Re: System and picture problems Samsung DLP HLR5067W

Re: Please help I am pulling my hair out

Re: 61" samsung green screen of death.

Re: 61" samsung green screen of death.

Re: Samsung HLR5667W - Cycling on and off

Re: SAMSUNG HR-L 5667WAX/XAA ISSUES

Re: I found a way to fix my digital board. hlr5067w

Re: help with the dreaded 'lamp light'

Re: HLR5067 Wax/xaa no picture-no sound

I found a way to fix my digital board. hlr5067w