Red Wire From Lamp Assembly Plug In
Moderator: Angel
Forum rules
-
LeopoldLeopold
- Contributor
- Posts: 7
- Joined: Tue Aug 23, 2011 11:20 pm
Red Wire From Lamp Assembly Plug In
The red wire on the left side of two that the lamp assembly plugs into has to be replaced. Can I simply unplug it where it goes into the black round connector?
-
LeopoldLeopold
- Contributor
- Posts: 7
- Joined: Tue Aug 23, 2011 11:20 pm
Re: Red Wire From Lamp Assembly Plug In
I found that I could not replace the wire to the power ballast supply so I replaced the power ballast supply and it works fine now.