HL-P5063W no power after replacing color wheel

[cableghost]

I replaced the color wheel (complete with housing) on my Samsung, and after putting the unit back together (less the back panel), it won't start.

It appears I plugged the copper-looking flat cable in correctly, as the side with the contacts faces the contacts on the connection housing (metal side facing rear of TV).

The Stand by/Power/Lamp lights flash. There's no clicking, I don't hear the color wheel starting up, etc.

The TV was working prior to replacing the color wheel, except for the whining noise :-)

I replaced the lamp 6 months ago with a new bulb.

My unit already had the air-bearing color wheel, so the jumper is already removed.

I took the light box, or whatever they call the unit, back out, and reconnected all cables, etc.

Any advise would be appreciated.

-Scott

[cableghost]

Doh...not placing the back on the set was the issue. I had not realized, there's a toggle switch, probably to prevent bright stars like myself from turning on the set with the back off :?

-Scott