hls6187w dlp one red led flashing


Moderator: Angel

Forum rules
newguy23
Contributor
Contributor
Posts: 3
Joined: Mon May 31, 2010 12:09 am

hls6187w dlp one red led flashing

Postby newguy23 » Fri Jun 18, 2010 4:28 am

replaced ballast and temp sensor,tv still powers on for about 10 seconds(long enough to get picture)then right back off with the one temp/standby led flashing...any help is greatly appreciated samsung is no help at all and d-m suggested the ballast that didnt fix the problem.I am at a loss and ready to cut my losses.

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: hls6187w dlp one red led flashing

Postby ChubbsTech » Mon Jun 21, 2010 4:15 pm

Hello newguy23.
Before you starting suspecting on having a defective ballast, did you check your lamp?
Normally these lamps last between 2 – 3 years under normal usage (6000+ hrs). another question is have you cleaned the inside of the TV? This is so we can discard overheating as the source of the problem.
Hope this helps you out.
Remember Knowing Is Half The Battle !


Return to “Samsung Discussion”