HLR5067W new color wheel, new problem


Moderator: Angel

Forum rules
Froggy
Newbie
Newbie
Posts: 2
Joined: Wed Dec 15, 2010 1:58 am

HLR5067W new color wheel, new problem

Postby Froggy » Wed Dec 15, 2010 2:06 am

I have a Samsung HLR5067W. I just replaced the color wheel. Everything went back together fine. Once I power the TV up, the picture has a "bleeding" effect. I've let it run for a while. Still the same. I went through the settings and everything is the same before the color wheel went out. Any ideas?

Thank you

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: HLR5067W new color wheel, new problem

Postby Jason1976 » Sat Jan 15, 2011 1:06 pm

did you go into the service menu or just the standered menu? to enter service menu have power off. on remote press. mute 1 8 2 power in order. check the color wheel settings.

TWD
Newbie
Newbie
Posts: 2
Joined: Wed Jan 26, 2011 6:04 pm

Re: HLR5067W new color wheel, new problem

Postby TWD » Wed Jan 26, 2011 6:13 pm

Check the index delay in the service menu. The Red, Green, Blue should be evenly graduated from Dark (left side) to light (right side). If they are not adjust up or down to achieve desired results.


Return to “Samsung Discussion”