Samsung model hl-s6167w fan #2 location

[vieranole]

Where is it? I clearly see what must be fan #1 because it's much smaller. HELP!!

[guitarman051]

Hey there I have an HLR 6167W and yours I believe is in same postion as mine. Pull bulb cover off 4 screws, then the back cover believe 12 screws and remove rear cover. You will see a 2x2 small fan and remove screw for bulb housing and remove DLP bulb housing. Take a flash light and you will see behind DLP bulb housing the cooling fan which is a 4x4 fan. To get to fan you will need to remove that section of your DLP, lamp engine which consists of 2 screws at bottom of frame a metal grounding bracket that also has 2 screws in side of frame and 4 wire conectors and a wire support over DNI connector releasing clips that hold that in. That section is ready to slide out carefully. Over fan is a black housing remove screws and remove housing and trace wires from fan to small board and slide fan out. To reinstall, reverse removal prosses. If you needed to, take a digital picture before pulling apart.

Good Luck
Howard :idea: