Now What?


Moderator: Angel

Forum rules
Lister
Newbie
Newbie
Posts: 2
Joined: Fri Aug 07, 2009 12:11 am

Now What?

Postby Lister » Fri Aug 07, 2009 12:20 am

I have have HLN617WX\XAA and last year changed the bulb no problem. Changed the colour wheel 6 months ago.

About 3 weeks ago black lines appeared vertical on the screen still watchable just anoying.

2 days ago the Screen when blank.

Checked the lamp and the colour wheel all start up and lamp light on the stops flashing as normal but no picture. When it first starts up there a slight flash as normal but then nothing. Tried the mute + 1 + 8 + 2 power but i can't see anything

any ideas?

Thx

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: Now What?

Postby Jake » Mon Aug 10, 2009 6:10 pm

For what you are saying it seems that your problem is with your DMD board.
[color=#FF0000]Jakey![/color]

Rivers85
Contributor
Contributor
Posts: 11
Joined: Mon Aug 03, 2009 2:12 pm

Re: Now What?

Postby Rivers85 » Mon Aug 10, 2009 10:15 pm



If you're picture looked like this:

313734.jpg
313734.jpg (41.73 KiB) Viewed 5996 times


Then the problem is the light tunnel. A collapsed light tunnel causes this darker image in a portion of the screen, basically the light passes through a series of optical filters guiding the light all the way into the screen. So it's most likely that one of the lenses has collapsed and a portion of the light isn’t reaching the screen causing this darker image.

If not, then did your picture looked like this:

563045.jpg
563045.jpg (21.42 KiB) Viewed 5996 times


Then this might be the DMD board, this board is the one in charge of sending the image into the screen, it has a DLP chip that controls about 2 million pixels (mirrors) and each one reflect the light so the board itself may be malfunctioning causing this black and white stripes in the screen

This is the DMD board with the DLP chip:

DMD Board.JPG
DMD Board.JPG (44.86 KiB) Viewed 5996 times

Lister
Newbie
Newbie
Posts: 2
Joined: Fri Aug 07, 2009 12:11 am

Re: Now What?

Postby Lister » Tue Aug 11, 2009 11:28 am

Thanks for the information, I am gonna replace the DMD board. River, it was the latter pic with the vertical lines but not as pronouced.

Stay tuned ;)


Return to “Samsung Discussion”