Page 1 of 1

Ballast advice needed RCA M50WH92S

Posted: Thu Oct 28, 2010 8:34 pm
by drdreww
So I just got this TV off of craigslist and it worked fine for a week. then it started having the RCA 5blinks of death. so i vacuumed and canned air it all out hoping it might get better with better airflow. it started working again for a week then started again. the tv comes on just fine, then after seemingly random increments of time the bulb would turn off but the sound would stay on, 5 blinks of the power light then come on again. have been doing alot of research and from other peoples problems i concurred that it is probably the ballast. i could hear it audibly snapping/clicking 2-15 times before the bulb would turn on. so i pulled the whole back off and found some suspicious stuff on the ballast board.



Uploaded with

Uploaded with



has anyone dealt with this before?
is there still a possibility that it is the bulb?
am i looking at having to get a whole new ballast?
or could i maybe just replace that transformer since it still works sometimes.

thanks for your help guys!

Re: Ballast advice needed RCA M50WH92S

Posted: Sun Feb 06, 2011 10:51 pm
by grayfox
hello,
if you can get the transformers, there is still a chance this might not fix the problem, I would settle for exchanging the ballast altogether..