BIG Problems with WD-52725


Moderator: Angel

Forum rules
Crocluvr92
Newbie
Newbie
Posts: 1
Joined: Fri Jan 29, 2010 3:27 am

BIG Problems with WD-52725

Postby Crocluvr92 » Fri Jan 29, 2010 3:32 am

I just bought this TV from an online auction and the Red Light for Bulb came on after I plugged it in. I Just replaced the bulb and got the red light again after the TV started up, then just today, I replaced the ballast and I plugged in the TV and as with the other times the green light blinked for the reset, I turned on the TV and the light stayed green for about a minute then switched back to the red light again! Im getting VERY tired of this. Any suggestions?

User avatar
admin
Site Admin
Site Admin
Posts: 31
Joined: Thu Mar 12, 2009 7:17 pm
Location: San Francisco

Re: BIG Problems with WD-52725

Postby admin » Fri Jan 29, 2010 8:51 am

Those TVs usually have a sequence of lights. We have a guide on the main site to read how the lights work. For example, status blinking red means it could be the fan. If the lamp LED is blinking, could be a combination of either lamp, ballast, or power supply. Even a color wheel. Just gotta give more symptoms.
[i]"Apparently there is nothing that cannot happen today."

-Mark Twain[/i]

ovadoggvo
Master Technician
Master Technician
Posts: 267
Joined: Thu Mar 12, 2009 10:32 pm

Re: BIG Problems with WD-52725

Postby ovadoggvo » Wed Feb 10, 2010 1:03 am

When you installed the ballast, did you check your color wheel?

Are you sure you have your lamp cover completely and securely fastened? There is a sensor there ya know!


Return to “Mitsubishi Discussion”