62 '" mits dlp lamp shut down


Moderator: Angel

Forum rules
kweb701
Newbie
Newbie
Posts: 2
Joined: Thu Sep 03, 2009 10:47 pm

62 '" mits dlp lamp shut down

Postby kweb701 » Fri Sep 04, 2009 3:43 am

HI every one I have a 62 " mitsubishi new lamp, checked fans and filters lamp comes on for a few secs the goes off ,, pos the ballast??? and where can i find one . I have a parts tv and when i swapped out the thermal sensor i had a picture for about 15 mins then nothing , not sure if this was just a fluke, just checked incoming voltage to ballast i have 324v now what??

thanks

kev

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: 62 '" mits dlp lamp shut down

Postby Jake » Wed Sep 09, 2009 10:29 pm

It could be the ballast

Do you hear any constant clicking sounds?, any intermittent electrical buzzing sounds?

What TV model do you have?
[color=#FF0000]Jakey![/color]

kweb701
Newbie
Newbie
Posts: 2
Joined: Thu Sep 03, 2009 10:47 pm

Re: 62 '" mits dlp lamp shut down

Postby kweb701 » Wed Sep 09, 2009 11:44 pm

no everything sounds good ,it is the wd62525. thanx jake


Return to “Mitsubishi Discussion”