New Lamp?


Moderator: Angel

Forum rules
Joe
Newbie
Newbie
Posts: 1
Joined: Mon Apr 05, 2010 3:54 pm

New Lamp?

Postby Joe » Mon Apr 05, 2010 4:03 pm

I have a Sony Model #KDF 46E200. It had a messege displayed for about a month that the projection lamp was close to ending its life. We tryed to turn it on and the screen would not come on. There is a low electrical buzzing sound for about a minute and then the lamp light located below the screen turns red. Do I need a new lamp?

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: New Lamp?

Postby ChubbsTech » Tue Apr 06, 2010 11:28 pm

Hello Joe.
There is a very high possibility that all you need is a new lamp (to learn more view this topic viewtopic.php?f=10&t=1263 ), how ever if you replace it & nothing happens, try resetting the lamp timer.
Read this post on how to:
viewtopic.php?f=15&t=871
the buzzing noise on the other hand is a little suspicious, If all of the above dose not make you tv work properly then the next suspect might be the ballast.
good luck.
Remember Knowing Is Half The Battle !


Return to “Sony LCD Projection Discussion”