KDF-E60A20 went dead, Power LED blinks red!!


Moderator: Angel

Forum rules
BillT
Contributor
Contributor
Posts: 3
Joined: Thu Jul 02, 2009 2:21 am

KDF-E60A20 went dead, Power LED blinks red!!

Postby BillT » Thu Jul 02, 2009 2:35 am

KDF-E60A20 Power LED on front panel blinks 3 times in red. I was watching it when the picture went dead. No picture, no sound. I pulled out the lamp, called around, was told it should be replaced (3 1/2 years old) even though it wasn't broken. I replaced it. Same symptoms. Owners manual says the display unit needs servicing, pleas call Sony service. Would appreciate any feedback. Thank you. Bill

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: KDF-E60A20 went dead, Power LED blinks red!!

Postby Angel » Thu Jul 02, 2009 9:04 pm

Do you hear any strange noise? Any clicking or something else?
The best "Do It Yourself" site for all types of Displays!

BillT
Contributor
Contributor
Posts: 3
Joined: Thu Jul 02, 2009 2:21 am

Re: KDF-E60A20 went dead, Power LED blinks red!!

Postby BillT » Thu Jul 02, 2009 11:04 pm

No, I was watching at the tme it failed and there was no clicking or popping or anything at all.

BillT
Contributor
Contributor
Posts: 3
Joined: Thu Jul 02, 2009 2:21 am

Re: KDF-E60A20 went dead, Power LED blinks red!!

Postby BillT » Mon Jul 06, 2009 8:28 pm

Turned out to be the GM board, adjacent to the power supply.


Return to “Sony LCD Projection Discussion”