Page 1 of 1
error message filter cleaning
Posted: Sat Feb 06, 2010 2:18 pm
by rwing
Cleaned filters now how do i resit the sirflter message, I took the entire television apart, cleaned the filter inthe back snd dusted off the front filter, now it is still timing out after 1 min and not going away? how do I reset this error? un1t is clean, temp sensors are good I checked them, seems panasonic does not have any itea, told to throw it wwY,,, i WAS TOLD THIS WOLD LAST THAT IT WOULD BE GOOD anyibe elaw ogo the info,
Re: error message filter cleaning
Posted: Tue Feb 09, 2010 5:54 pm
by Eddie
If you took it apart, you can put it back together. I don't think there's a reset code, but possible the code that came up wasn't the problem in the first place.
Re: error message filter cleaning
Posted: Wed Feb 10, 2010 8:21 am
by rwing
Re: error message filter cleaning
Posted: Wed Feb 10, 2010 5:59 pm
by Eddie
Not for Panasonic as far as I know, but maybe. The Toshibas had law suits, so did the Sonys.
It may just be a bad temp sensor... for all your troubles, if it eventually comes on, I wouldn't sink too much money into fixing it. You might be able to find someone to part with their old TV or even find the temp sensor on DM or something.