Toshiba 62HM95 Wiring diagram


Moderator: Angel

Forum rules
bricklin
Newbie
Newbie
Posts: 2
Joined: Mon Jun 23, 2014 6:31 pm

Toshiba 62HM95 Wiring diagram

Postby bricklin » Mon Jul 07, 2014 2:03 am

Can any one assist me in locating an actual wiring diagram for a 62HM95 showing where the pj's go and wires are connected. I picked up this freebie tv and somebody had thier fingers in it. I'm not quite sure that everything is where it should be. I have the basic service manual but it doesn't show what goes where.

Any help would be greatly appreciated.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Toshiba 62HM95 Wiring diagram

Postby grayfox » Mon Jul 07, 2014 5:57 pm

hello bricklin,



I have searched up and down and cannot seem to find one online and Toshiba was not helpful.. The only thing I can think of is that you get a general idea of how to pull it apart and put it back together!



This TV uses a "Light Engine" and is pretty much composed of:



A Lamp, Ballast, Colorwheel, Power Supply, Main Input Board (maybe Aux also), Digital Video Board, the Projection tunnel and some fans!



I would begin with replacing the Lamp with an OEM bulb, for your TV it is the Toshiba D95-LMP. Many many times this is all that is wrong with the TVs that I fix.



I also find it very helpful, when I believe something inside is out of place, to look at videos of people taking these apart (model specific) like the videos in the link below



https://www.youtube.com/results?search_query=Toshiba+62HM95



I hope this was helpful
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound


Return to “Toshiba DLP Discussion”