Samsung HLP5063w Stanby/Temp Light

Moderator: Angel

Post Reply
darock
Contributor
Contributor
Posts: 7
Joined: Fri Feb 18, 2011 3:07 am

Samsung HLP5063w Stanby/Temp Light

Post by darock » Tue Feb 22, 2011 3:03 pm

Hello,
Just replaced my lamp. TV looks great. :P
Q: When I turned off the TV the Standby/Temp indicating light
stays on constently (not blinking).
Also the blue LED light that blinks three times when you power off
then stays on is not working any reason why?
Thanks

P.S. Great site very informative

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w Stanby/Temp Light

Post by grayfox » Tue Feb 22, 2011 4:13 pm

Hello!
hhmm, try checking if all fans are spinning when your tv is on, or this might just be a malfunctioning thermostat they sell all these parts online see below...
hope this helps!

http://www.discount-merchant.com/SAMSUN ... 192613.htm

http://www.discount-merchant.com/SAMSUN ... 171373.htm
ImageUnit Foxhound

darock
Contributor
Contributor
Posts: 7
Joined: Fri Feb 18, 2011 3:07 am

Re: Samsung HLP5063w Stanby/Temp Light

Post by darock » Tue Feb 22, 2011 4:59 pm

Hi Master Tech,
Both fans are working. so you're saying it could be the
temp sensor.
WHat about the Blue LED light that's supposed too
stay on when tv is off.
Also I do her that winding sound from the color wheel,
although the color looks great as of now :D

thanks M.T.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w Stanby/Temp Light

Post by grayfox » Tue Feb 22, 2011 5:03 pm

welcome darock!
oh if you're starting to hear the screeching grinding of a colorwheel it is about to give out on you and that's why you are getting the blue error code in the front :cry: ... just make sure it is not a fan first :lol:
ImageUnit Foxhound

Post Reply

Return to “Technical Specs”