Blue spot on LCD screen panasonicMODEL PT-52LCX35

This form contains information on DLP, LCD Projection and other RPTV issues. Any information about a television device that requires a lamp and a ballast should be created here.

Moderator: Angel

Forum rules
bslobo
Newbie
Newbie
Posts: 1
Joined: Thu Apr 29, 2010 5:29 pm

Blue spot on LCD screen panasonicMODEL PT-52LCX35

Postby bslobo » Thu Apr 29, 2010 5:43 pm

I have a blue spot on my LCD screen panasonic MODEL PT-52LCX35. I replaced the bulb unit and still have a small blue spot on screen

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: Blue spot on LCD screen panasonicMODEL PT-52LCX35

Postby ChubbsTech » Fri May 07, 2010 3:04 pm

Hello bslobo.
The reason why the blue spot still remains is because the lamp only emits white light. The one in charge of giving color to the picture is the 3 LCD chips (red, blue & green).
There is a probability the one or two chips might have started to burn in some areas due to the heat emitted from the light passing though them.
In order to fix your problem is to replace the chips; however they are very difficult to find individually, they are normally sold with the entire light engine. If you still have your warranty I would recommend calling Panasonic.
If you have any more questions feel free to ask.
Good luck.
Remember Knowing Is Half The Battle !


Return to “DLP, LCD Projection, and other RPTV”