zenith dlp re-set

This form contains information on DLP, LCD Projection and other RPTV issues. Any information about a television device that requires a lamp and a ballast should be created here.

Moderator: Angel

Forum rules
ohicanfixthat
Contributor
Contributor
Posts: 3
Joined: Sun Jul 18, 2010 2:49 pm

zenith dlp re-set

Postby ohicanfixthat » Sun Jul 18, 2010 3:14 pm

I put the bulb in wrong and so I went to the menu by holding the remote menu and tv meu at the same time. Oh I was trying to fix the problem of it being too dark. I messed with all of the settings trying to get the piture brighter.
So after messing will all of the factory settings and not being able to get it brighter, I decided to have a look at he bulb again and figured out that I did not seat the bulb right.
The tv works fine now; however, the piture is messed up because I screwed with the factory settings.
I need to re set the tv back to what zenith had in mind when they built it.
help I really messed things up , how do I re set the tv? is there a button or something? or a code?

darkart77
Tech Junkie
Tech Junkie
Posts: 189
Joined: Mon Mar 22, 2010 4:34 pm

Re: zenith dlp re-set

Postby darkart77 » Mon Aug 02, 2010 4:18 pm

you can go to the manual and reset the original default settings. Or you can download the manual on line for free.

ohicanfixthat
Contributor
Contributor
Posts: 3
Joined: Sun Jul 18, 2010 2:49 pm

Re: zenith dlp re-set

Postby ohicanfixthat » Mon Aug 02, 2010 5:07 pm

no the user manual says call zenith.


Return to “DLP, LCD Projection, and other RPTV”