I have a Mitsubishi 65" DLP WD-65732 and its not powering up. One day it
turned on but was only sound at first then after a min the picture came on.
Then the next day it didnt come on at all.
When it turns on the fans all come on and it sounds like its going at first
but then quits then tries to fire up again but then fails then ultimately
doesnt power up after a few attempts to.
I tried replacing the lamp and that didnt work same symptoms. Ive had a few
bad lamps before and normal it signals by a red LED but this time it didnt
do that. I did the trouble code test and it signaled 6-6 "bad lamp or
I then replaced the lamp ballast and after that i powered it up and now
it starts making a fast clicking noise and every time it clicks i can see
the lamp spark like it wants to fire up but doesnt. I checked the voltage at the ballast and i got ~335v. Should it be 380v like the label on the ballast(where it plugs in) says?
Im assuming this is a very simple problem that im overlooking based on the
symptoms. Any help would be greatly appreciated.