Symptoms: The RCA DLP was given to me and fires up, but has image quality issues where there is purple/pinkish ghosting/shadowing to the right of everything, including the menus. Additionally, when something is actually hooked up and providing a video signal, the menus get "wavy" (as shown in the pictures in the previously linked threads).
Technical Details: Video input originates through the A/V input board (Composite, component, DVi) or DM2CR digital module (tuner, on-screen menus) and is transmitted to the formatter board for conversion to digital. According to the service guide, HD video inputted through the A/V board bypasses the DM2CR and is applied directly to the formatter. Video from the tuner is transmitted from the DM2CR directly to the formatter, bypassing the A/V board.
Preliminary Diagnosis: Because the test patterns generated by the light engine and formatter board are immune to the problem, I originally ruled the formatter out as a culprit, but because the issue affects both video from the DM2CR and the A/V Input board independently, I have to assume that a single point of unusual failure is more likely than two.
I recently purchased a used formatter board to replace the one I diagnosed as bad, but this does not change the symptoms. Does anyone have any ideas as to what could cause this?
Here are some additional pictures to highlight the nature of the problem (please see the linked threads at the top of the page for more pictures of the symptoms):