This form contains information on DLP, LCD Projection and other RPTV issues. Any information about a television device that requires a lamp and a ballast should be created here.
This just started a few weeks ago. At first I thought maybe the bulb was hot but it has happened 2 minutes after first turning it on for the day, sometimes a couple hours afterwards, sometimes mulitple times in a row, and sometimes not at all. I haven't noticed it the past 4 days. What should I be looking at that could cause this so I can correct it?
- Posts: 3
- Joined: Thu Sep 20, 2012 10:43 pm
usually when the unit turns off, there may be a light blinking on the front panel. Depending on the frequency and combination of that flashing, you can probably diagnose the issue if you still have the original manual
but it could be a possibility that maybe the fans aren't cooling the lamp so as a safety precaution the tv is turning off to prevent a "meltdown"
Remember Knowing Is Half The Battle !
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Return to DLP, LCD Projection, and other RPTV
Who is online
Users browsing this forum: No registered users and 1 guest