SAMSUNG 50 DLP

This form contains information on DLP, LCD Projection and other RPTV issues. Any information about a television device that requires a lamp and a ballast should be created here.

Moderator: Angel

SAMSUNG 50 DLP

Postby goz » Thu Feb 24, 2011 5:31 am

OK, replaced the bulb and now new. the TV will run for 5-10 minutes and then power down. all three lights on front of the screen are flashing. Does anyone have suggestions on the next step.

Thank and Go Hawks
goz
Newbie
Newbie
 
Posts: 2
Joined: Thu Feb 24, 2011 5:15 am

Re: SAMSUNG 50 DLP

Postby grayfox » Thu Feb 24, 2011 10:29 pm

Go Hawks!
the most logical step given the symptoms you describe, I am speculating you are not getting any image distortion, would be to replace the ballast.
If you read some of these Samsung forums it is the #2 problem aside from ballast and will usually give you the details you describe...
hope this helps
ImageUnit Foxhound
User avatar
grayfox
Jedi Master
Jedi Master
 
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!

Re: SAMSUNG 50 DLP

Postby goz » Thu Feb 24, 2011 11:34 pm

Thanks. Looks easy to replace. I should almost replace the color wheel at the same time as well since the TV is apart. What's your take on that?
goz
Newbie
Newbie
 
Posts: 2
Joined: Thu Feb 24, 2011 5:15 am

Re: SAMSUNG 50 DLP

Postby grayfox » Thu Feb 24, 2011 11:39 pm

well as a tech, rule of thumb is that during a DLPs life span those last two consumable parts have to be changed at least once during the lifespan of the TV.
(do some research online and you will find this to be the case) in the long run i think this will save you future headaches... :mrgreen:
ImageUnit Foxhound
User avatar
grayfox
Jedi Master
Jedi Master
 
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!


Return to DLP, LCD Projection, and other RPTV

Who is online

Users browsing this forum: No registered users and 1 guest