Mitsubishi WD-62725 Lamp Replacement

Suggest a topic for discussion!

Moderator: Angel

Forum rules
bonanos
Newbie
Newbie
Posts: 1
Joined: Sun Jul 24, 2011 2:59 am

Mitsubishi WD-62725 Lamp Replacement

Postby bonanos » Sun Jul 24, 2011 3:05 am

The red light indicating that the lamp needed to be replaced was on, so we purchased a replacement lamp and installed it according to instructions, which were very simple. However, after plugging tv back in and pressing reset button, the red lamp indicator light continues to stay on and no tv.... please help??!!!!

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Mitsubishi WD-62725 Lamp Replacement

Postby grayfox » Thu Sep 29, 2011 8:08 pm

Hello,
Sometimes the lamps ballast goes out after you replace the lamp. The ballast essentially is responsible for powering up the lamp, since it is the second most popular consumable part in your TV, I would strongly advise you consider replacing it. It is relatively inexpensive and easy to do, there is a guide on this site http://www.fixyourdlp.com/guides/guides.php

Hope this helps!
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound


Return to “Forum Feedback”