Second question: Moved the TV from a location with cable where it worked great until lamp went out. After replacing the Lamp I moved the TV to a location that only has access via a HD box with an antenna that attached to the TV with a coxial cable. Now I am only getting Black and White picture. Is this a connection problem or something else I need to address?
SAMSUNG HLP 4663W
Moderator: Angel
Forum rules
-
charles1142
- Newbie
- Posts: 1
- Joined: Sat Jan 24, 2015 10:54 pm
SAMSUNG HLP 4663W
Second question: Moved the TV from a location with cable where it worked great until lamp went out. After replacing the Lamp I moved the TV to a location that only has access via a HD box with an antenna that attached to the TV with a coxial cable. Now I am only getting Black and White picture. Is this a connection problem or something else I need to address?
-
ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: SAMSUNG HLP 4663W
When your Timer and Standby/Temp lights are blinking, your TV is overheating. Dust and bulb failure are two leading causes for overheating in TVs. Unplug your TV and allow it to cool for an hour. Clean the dust away from the ventilation slots with a can of compressed air and a vacuum cleaner with an upholstery attachment. Make sure that the ventilation slots are not blocked by furniture, the wall or any other devices such as Blu-ray disc players,dvds,etc etc.
As for the black and white picture it could be an issue with the connections, try re-plugging all the connections.
Please let us know on the outcome.