Samsung HLP5063w DLP TV Lamp exploded

Suggest a topic for discussion!

Moderator: Angel

Forum rules
darock
Contributor
Contributor
Posts: 7
Joined: Fri Feb 18, 2011 3:07 am

Samsung HLP5063w DLP TV Lamp exploded

Postby darock » Fri Feb 18, 2011 7:27 pm

My Samsung HLP5063W DLP TV needs a new lamp. TV was working but picture was dimm. Then one day
while watching picture went black but had sound,after 2/3 minutes TV shut down.Timer, standby/temp and lamp indicator lights were blinking.Indicating need new lamp.
I ordered a new lamp #BP96-00826A.Lamp came in I installed the lamp.Got no picture,but had sound.Back panal was in place.the three indicating light were blinking again, thought the new lamp might have been defected.So I reinstalled the old lamp.got a dimm picture but went black again same
as previously.Returned new lamp to the distributer,they said the lamp fired up.they're sending me a new lamp. In the mean time ,I read something about restting the Tv to prior factory settings.I tried it set lamp to 0hours.WOW!!! I thought I found the solution.The old lamp was brighter then before,Tv was working beautifully for about 5 minutes.Then POW the lamp exploded.
Please Help.
What went wrong?
I'm waiting for the new lamp to arrive.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby grayfox » Fri Feb 18, 2011 11:09 pm

Hello darock,
Here is what I believe happened :geek: , your ballast is weak as it is a consumable part in your tv, that being mentioned:
-once the ballast went weak your old lamp shut down as did your TV. :(
-your TV gave you 3 blinking lights NOT just the lamp indicator light, indicating a board is malfunctioning (or colorwheel). You ordered a new lamp thinking this would solve this. ;)
-When you tried the new lamp (note* the newer the lamp the more voltage it needs, normally around 15,000 volt ignition), since the ballast was weak it did not fire it up. :|
-At that point you put in the old more spent lamp that required a less charge to ignite and it worked for a minute. :?:
-You figured you would reset the lamp timer (telling the ballast to send the new lamp 15kv amount to the lamp) and this worked until the lamp over heated and EXPLODED (hopefully nobody was injured)! :shock:
-you are now awaiting another new lamp that will most likely give you the same results (unless the first new lamp was defective). :?

...if I am correct, I would change the ballast! :P
hope this helps!
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound

darock
Contributor
Contributor
Posts: 7
Joined: Fri Feb 18, 2011 3:07 am

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby darock » Tue Feb 22, 2011 4:48 pm

Thanks Master Tech,

Installed new lamp w/old ballast. so far it looks Great :P
Only now the standby/temp light stays on when I turn off the tv.
Also the Blue LED light that is suppose too stay on when the tv is
offis not working :?:

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby grayfox » Tue Feb 22, 2011 5:05 pm

welcome darock!
oh if you're starting to hear the screeching grinding of a colorwheel it is about to give out on you and that's why you are getting the blue error code in the front :cry: ... just make sure it is not a fan first :lol:
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound

darock
Contributor
Contributor
Posts: 7
Joined: Fri Feb 18, 2011 3:07 am

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby darock » Tue Feb 22, 2011 6:26 pm

Thanks Grayfox,
Is it the larger fan you're talking about. :?: It works
but I don't know if drawing enough heat away( ie cfms.)
can I get a PC fan from computer store?
So you're saying the colorwheel may be the reason blue led
does'nt stay on when tv is off.

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby grayfox » Tue Feb 22, 2011 8:47 pm

Yup you are correct, as for the fan I am sure you can find one there are only a couple of fan manufacturers. If you wanted to purchase the original, they sell them by the set.
example!
http://www.discount-merchant.com
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound

User avatar
BYO
Tech Junkie
Tech Junkie
Posts: 103
Joined: Fri Mar 13, 2009 12:01 am
Location: San Francisco CA

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby BYO » Fri Apr 01, 2011 5:17 pm

[color=#40FF40]Change is the only constant, we must become the change we want to see. [/color]

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby grayfox » Fri Apr 01, 2011 5:46 pm

BYO stop following me!
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound

User avatar
BYO
Tech Junkie
Tech Junkie
Posts: 103
Joined: Fri Mar 13, 2009 12:01 am
Location: San Francisco CA

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby BYO » Fri May 27, 2011 8:15 pm

sorry foo... U will have to live with it....
[color=#40FF40]Change is the only constant, we must become the change we want to see. [/color]

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Samsung HLP5063w DLP TV Lamp exploded

Postby grayfox » Mon May 30, 2011 6:00 pm

hey crackie stop it! :lol:
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound


Return to “Forum Feedback”