Page 1 of 1

green tone to image

Posted: Wed Jun 11, 2014 6:50 am
by Louisa80
Hello Grayfox and crew,

It's been awhile. Things were working great but now we have green tones to everyone faces. Any idea what could be happening?

Thanks,

Loulou

Re: green tone to image

Posted: Wed Jun 11, 2014 4:54 pm
by grayfox
Hello Louisa,



Sorry to hear that your viewing experience has been interrupted. I would, right off the bat, attribute this to a faulty colowheel. Before I jump to aimless trouble shooting, could you refresh my memory with what model projector you have (If I remember correctly this was a projector..)? Also if you could explain a little bit in detail any and every malfunction that happens as you power the unit on.

My apologies I am very active in this forum and I loose track of my posts, but I hardly ever forget people!

Re: green tone to image

Posted: Fri Jul 17, 2015 11:49 pm
by Nephilim
Hi My 2 Cents, I was thinking if it was the colorwheel it probally would not boot up like if it was not spinning.. I am thinking check the HDMI or other way you connect it to the device it may just be a loose video connector.. I have a similar issues on my Projecotr with my PC if it gets loose I get a greenish tint to the picture..

Re: green tone to image

Posted: Tue Jul 21, 2015 10:48 pm
by grayfox
Hi,



Neph has a point, sorry being a tech i forget to trouble shoot with the small steps first. Please ensure you have a correct connection and that when you "wiggle" the cable around the image does not get better/worse..



Thank you Nephilim.