Help with phillips 509126D/37


Moderator: Angel

Forum rules
dboruckimedotcom
Newbie
Newbie
Posts: 2
Joined: Sun Mar 27, 2011 2:38 am

Help with phillips 509126D/37

Postby dboruckimedotcom » Sun Mar 27, 2011 2:45 am

Hello I am new here. I would like to say hello to you all.. I have a phillips DLP that i replaced the bulb on and I still get nothing on the screen. then a few seconds later the lamp failure light comes on. I hear the ballast click once and all the cpu fans are running properly PLEASE HELP!!!!!

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Help with phillips 509126D/37

Postby grayfox » Mon Mar 28, 2011 6:00 pm

Hello, It sounds like this is a textbook ballast issue, I am sure you can replace it yourself. How long have you had this RPTV? If there was never any discoloration or distortion on your screen then I would suggest you try a new ballast!
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound

dboruckimedotcom
Newbie
Newbie
Posts: 2
Joined: Sun Mar 27, 2011 2:38 am

Re: Help with phillips 509126D/37

Postby dboruckimedotcom » Thu Mar 31, 2011 3:55 am

any websites in mind i have been looking all over the place for a phillips ballast and all i can find is a samsung. I can't seem to find one but I did find an osram one will that work????

User avatar
BYO
Tech Junkie
Tech Junkie
Posts: 103
Joined: Fri Mar 13, 2009 12:01 am
Location: San Francisco CA

Re: Help with phillips 509126D/37

Postby BYO » Thu Mar 31, 2011 6:45 pm

Hi,

I tried to find info for your ballast, but the TV model # 509126D/37 doesn't exist. :o
Confirm your TV Model # :mrgreen:
[color=#40FF40]Change is the only constant, we must become the change we want to see. [/color]

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Help with phillips 509126D/37

Postby grayfox » Thu Mar 31, 2011 8:48 pm

you need the part number off the actual ballast itself! (some dissasembly required!) :lol:
[img]http://images2.wikia.nocookie.net/__cb20100421222828/ssb/images/thumb/1/18/MetalGearSymbol.svg/50px-MetalGearSymbol.svg.png[/img]Unit Foxhound


Return to “All About Lamps”