how to reset your lamp timer KDS R60XBR1


Moderator: Angel

Forum rules
montevideano
Newbie
Newbie
Posts: 2
Joined: Sat Nov 28, 2009 7:25 pm

how to reset your lamp timer KDS R60XBR1

Postby montevideano » Sat Nov 28, 2009 9:54 pm

Hi folks,

Last night I replaced the XL-5100 lamp in my Sony KDS-R60XBR1. I'm trying to reset the hours of the old lamp and I found some instructions in the Internet, which said, that to reset the lamp timer I first need to enter the Service Adjustment Mode doing the following:

DISPLAY+5+VOL+POWER.

To read the Lamp and Panel time it said to do the following:

Press the "JUMP" key [3 times]
You'll get into DE-micro service menu
Press "2" key [9 times] to show the Panel and Lamp hours.

I did this sequence several times without any luck.

Does anyone been successful and seeing the lamp hours and been able to reset the hours?

Your help is greatly appreciated.

Montevideano

montevideano
Newbie
Newbie
Posts: 2
Joined: Sat Nov 28, 2009 7:25 pm

Re: how to reset your lamp timer KDS R60XBR1

Postby montevideano » Sun Nov 29, 2009 5:08 pm

Folks,

I also tried to reset the lamp timer by doing the following:

press "3" , "MUTE" , and "ENTER" keys in sequence.
WRI-EXE(RED Character) is momentarily displayed and LampTM will be reset to "0"

I followed the instruction and nothing happened.

Any suggestions?

Thanks,

Montevideano

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: how to reset your lamp timer KDS R60XBR1

Postby ChubbsTech » Mon Apr 05, 2010 8:54 pm

Hello montevideano.
I just tried that in a Sony tv and discovered that there is a final step missing from your guide.
After pressing the 2 button nine times do the following.
Press 3 - then mute (it will change to “Write” ) – then enter ( the word “Write” will change from green to red. Wait from 40 to 60 seconds for it to turn back to green, now you’re all set. Finally you can turn off your TV.
Good luck.
Remember Knowing Is Half The Battle !


Return to “Sony LCD Projection Discussion”