JVC D-ILA DLP Lamp TS-CL110UAA TS-CL110U How-To Replacement Guide

For Part Number: JVC D-ILA DLP Lamp TS-CL110UAA TS-CL110U (Sealed replacement lamp for DLP televisions, small lamp with no vents)

Tools Required: Flathead screwdrivers, Torx T-6 or comparable driver, A new lamp and assembly.

Time Required: About 15 minutes

Abstract: This guide is being published to show how easy it is to replace your original JVC Lamp.

Click below to buy this lamp now:
Lowest Prices Anywhere!

— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!). Be a smart consumer and do your research! Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it!


Replacing your JVC D-ILA Lamp is very simple. Only tools required:

Flathead screwdriver (remove your lamp enclosure)
Torx T-6 or comparable driver

That’s it!

(Click on pics for high resolution photos)

Once you have the enclosure out, it should look similar to this:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_1

Ok, first step is to unscrew these two screws circled in yellow:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_2


Once those two are out of the way, unscrew the four small torx (two on either side). Then you’re left with:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_3


Here are acouple more pictures:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_4
FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_5


Now that you have all the screws off, simply separate the two plastic pieces and pull out the old lamp

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_6
FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_7
FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_8

Now it’s just a matter of replacing the old lamp for the new…reassemble in reverse order and enjoy!

IMPORTANT: The bulb should be handled with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this is a no-no for these lamps. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp.

If you’ve paid close attention to the pictures, you can see that this guide was created using a LTI (generic) lamp and enclosure. No worries, are lamps are all original. How can you tell me you’ve got an original lamp?

Here are a few more pics for reference:

FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_9
FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_10
FixYourDLP.com JVC_TS-CL110UAA_w_Enclosure_Picture_11

Click below to buy this lamp now:
Lowest Prices Anywhere!


FixYourDLP.com Blog | FixYourDLP.com Forum | Guides
FixYourDLP Flickr | FixYourDLP YouTube

Copyright ©2014 FixYourDLP.com. All content on this website is intended for information purposes only. FixYourDLP.com is not responsible, nor liable for any damage caused by the end-user, faulty lamps or parts. Please, always have a service center or a trained service technician advise you before beginning any repairs on your own.