Samsung DLP Lamp BP96-00826A How-To Replacement Guide (SMALL Lamp)

Click below to buy this lamp now:

Lowest Prices Anywhere!

Compatible TV Models: HLM4365, HLP5063WX/XA, HLP6163WX, HLR4667WX/XAP, HLM4365WX, HLP5063WXXAA, HLP6163WX/XAA, HLR4677W, HLP4663, HLP5067W, HLP6167W, HLR5064W, HLP4663WX, HLP5067WX, HLP6167WX/XAA, hlr5067w, HLP4663WX/XA, HLP5067WX/XAA, HLR4264W, HLR5067WX, HLP4663WX/XAP, HLP5663W, HLR4266WX/XAA, HLR5067WXXAA, HLP4667W, HLP5663WX, HL-R4667, HLR5067WX/XAP, HLP4667WX, HLP5663WX/XA, HLR4667W, HLR5667W, HLP4667WX/XAA, HLP5663WX/XAA, HLR4667W1X/XAA, HLR5667WAX/XAA, HLP5063, HLP5667W, HLR4667WAX, HLR5667WX, HLP5063W, HLP5667WX/XAA, HLR4667WAX/XAA, HLR5667WX/XAA, HLP5063WX, HLP6163W, HLR4667WX/XAA HLR5677W, HLR6156W, HLR6167WAX/XAA, HLR6167WX/XAP, SP50L3HRX, HLR6167W, HLR6167WX/XAA, SP46L3HRX, SP61L3HRX.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Phililps screwdriver, 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original SAMSUNG BP96-00826A Lamp (Small Lamp).

NOTE: We recommend you to use latex gloves when handling the new bulb to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

	SAMSUNG BP96-00826A (Small Lamp)			1.- At the top of the enclosure there are two screws also there is another one at the middle in the front.
	2.- Remove them using a Philips screwdriver.			3.- And it will look like this.
	4.- Using a Philips screw driver remove the cable connected to the side of the lamp.			5.- With a pair of pliers disconnect the cable to the top of the lamp.
	6.-On the base of the lamp, there is a lamp holder place with 4 screws			7.- Uninstall them with a Phillips screwdriver.
	8.- Take out the lamp holder from the enclosure, by pulling it out.			9.- Now you can take out your old bulb from the enclosure, by pulling out.
	A.- Take out your new Philips E22 UHP 100W/120W 1.0 lamp.			B.- Place your new Philips E22 UHP 100W/120W 1.0 lamp into the enclosure
	C.- Place the lamp holder back to its original position.			D.- And secure it using the four screws.
	E.- Reconnect the cable to the top of the lamp by tightening the nut.			F.- Reinstall the cable to the side of the lamp, using a philips screwdriver.
	E.- Place the lamp cover to the top of the enclosure and secure it with the three screws.			F.- And we finished, Congratulations!

 

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

 

Click below to buy this lamp now:

Lowest Prices Anywhere!