Samsung BP96-01579A (For HLS / HLT Series Televisions) How To Guide Replacement DLP TV Color Wheel Guide

For Part Number: BP96-01579A (For HLS / HLT Series Televisions color wheel)

Tools Required: Standard Philips & Flathead screwdrivers, Pair of Pliers, A new colorwheel

Time Required: About 2-4 hours

Abstract: This guide is being published to show how easy it is to replace your original Samsung Colorwheel for Television models HLT4675S, HLT5075S, HLT5675S, HLT6756W, HLR5067W, HLR5656W, HLR6767W, HLT5076S, HLT5676S, HLT6176S.

This guide is being published to show how easy it is to replace your original Samsung Colorwheel for Television models

Click below to buy this colorwheel part now:

Lowest Prices Anywhere!

What else can cause a "Lamp" light to go on even though I've replaced my lamp with a new one?

1. Defective Lamp
2. Defective Colorwheel
3. Defective Ballast (For symptoms and replacement guide of your ballast please click here)
4. Defective Main Power Supply

What are the main symptoms of a bad colorwheel?

1. The TV gives a "Lamp Replacement" code when powering on the TV even when the lamp has been replaced.
2. The TV does not make a "Click" noise or "Surge" when pressing the power button. The click noise is one of the fastest ways to decide whether the ballast or other components of your TV are bad rather than the lamp.
3. The TV makes rapid "Clicking" noises (3-5 clicks every 2-3 seconds). This means that your ballast is weak and can not fire the lamp.

What you'll need :

1. Standard Philips & Flathead screwdrivers (If you have a power screwdriver, this will help you a lot!!!)
2. Pair of Pliers
3. A new colorwheel specific to your television
4. 2-4 hours of your time (we can do it in about 40 minutes).

IMPORTANT: Lamps, bulbs, and parts should be handled with a clean cloth at all times to avoid any dirt or oil. Our hands are naturally oily…this is a no-no for these lamps. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint free cloth before reinstalling your lamp. Discharge yourself from any electro-static charge before working on your ballast.